多孔Al2O3f/Al2O3复合材料研究进展

doi:10.11896/cldb.22070158

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4087KB)
Export: BibTeX | EndNote (RIS)

Abstract As one kind of ceramic matrix composites which rose in the 1990s, continuous alumina fiber reinforced alumina matrix (Al₂O_3f/Al₂O₃) composites have been developed into structural materials that are as important as those non-oxide/non-oxide ceramic matrix composites like C_f/SiC and SiC_f/SiC composites. The main approach to achieve damage tolerance for the Al₂O_3f/Al₂O₃composites is the porous matrix rather than fiber coating. Due to their excellent oxidation resistance and high-temperature mechanical properties, the porous Al₂O_3f/Al₂O₃ composites can be used for a long time under varying environmental factors, such as high temperature, modest loads and moisture, and have already been deve-loped as prime candidate materials for thermal structural materials. After about 30 years of development, the porous Al₂O_3f/Al₂O₃ composites have already been applied in hot sections such as aeroengine and gas turbine. This paper summarizes the research progress in design for tough behavior, preparation, microstructure and mechanical properties of the porous Al₂O_3f/Al₂O₃ composites. Finally, the key problems and future development tendency of the porous Al₂O_3f/Al₂O₃ composites are proposed.

Key words： Al₂O_3f/Al₂O₃ composite porous matrix toughening mechanism microstructure mechanical property

Published: 10 May 2023 Online: 2023-05-04

CLC number:

TB332

Fund:Natural Science Foundation for Distinguished Young Scholars of Hunan Province (2020JJ2032).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Haitao
	JIANG Ru
	SUN Xun
	CHEN Xiaofei
	MA Xin
	YANG Fang

Cite this article:

LIU Haitao,JIANG Ru,SUN Xun, et al. Research Progress on the Porous Al₂O_3f/Al₂O₃ Composites[J]. Materials Reports, 2023, 37(9): 22070158-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22070158 OR http://www.mater-rep.com/EN/Y2023/V37/I9/22070158

1 Zhang L T. Fiber-reinforced silicon carbide ceramic composites—modeling, characterization & design, Chemical Industry Press, China, 2009, pp. 33 (in Chinese).
张立同. 纤维增韧碳化硅陶瓷复合材料—模拟、表征与设计, 化学工业出版社, 2009, pp. 33.
2 Ma Q S, Liu H T, Pan Y, et al. Journal of Inorganic Materials, 2013, 28(3), 247 (in Chinese).
马青松, 刘海韬, 潘余, 等. 无机材料学报, 2013, 28(3), 247.
3 Dang X L, Fan X M, Yin X W, et al. Journal of Inorganic Materials, 2020, 35(1), 29 (in Chinese).
党潇琳, 范晓孟, 殷小玮, 等. 无机材料学报, 2020, 35(1), 29.
4 Zhao C L, Yang B, Li K, et al. Materials China, 2021, 40(4), 257 (in Chinese).
赵春玲, 杨博, 李阔, 等. 中国材料进展, 2021, 40(4), 257.
5 Berger M, Bunsell A R. In:Comprehensive composite materials II, Beaumont P W R, Zweben C H, ed., Elsevier, Amsterdam, 2018, pp. 218.
6 Liu H T, Huang W Z, Zhou Y J, et al. High-temperature structural materials for microwave absorption, Science Press, China, 2017, pp. 73 (in Chinese).
刘海韬, 黄文质, 周永江, 等. 高温吸波结构材料, 科学出版社, 2017, pp. 73.
7 Walock M J, Heng V, Nieto A, et al. Journal of Engineering for Gas Turbines and Power, 2018, 140(10), 102101.
8 Singh A K, Kahle K, James H, et al. Ceramics International, 2021, 47, 17268.
9 Pritzkow W, Almeida R, Mateus L, et al. Journal of the European Ceramic Society, 2021, 41, 3177.
10 Schmucker M, Mechnich P. In:Ceramic matrix composites:fiber reinforced ceramics and their applications. Krenkel W, ed., Weinheim:Wiley, Germany, 2008, pp. 205.
11 Tushtev K, Almeida R S. In:Comprehensive composite materials II, Beaumont P W R, Zweben C H, ed., Elsevier, Amsterdam, 2018, pp. 133.
12 Mechnich P, Welter M. In:Encyclopedia of Materials:Composites, Brabazon D, ed., Elsevier, Amsterdam, 2021, pp. 48.
13 Zok F W. Journal of the American Ceramic Society, 2006, 89(11), 3309.
14 Keller K A, Jefferson G, Kerans R J. In: Ceramic matrix composites: materials, modeling and technology, Bansal N A, Lamon, ed., Wiley, Hoboken, 2015, pp. 236.
15 Volkman E, Teushtev K, Koch D, et al. Composites Part A:Applied Science and Manufacturing, 2015, 68, 19.
16 Ruggles-Wrenn M B. In:Comprehensive composite materials II, Beaumont P W R, Zweben C H, ed., Elsevier, Amsterdam, 2018, pp. 174.
17 Pritzkow W E C, Wehner F. In: Encyclopedia of materials:metals and alloys. Francisca G.Caballero F G, ed., Elsevier, Amsterdam, 2022, pp. 425.
18 BehrendT T, Hackemann S, Mechnich P, et al. In:Proceedings of ASME Turbo Expo 2016:Turbomachinery Technical Conference and Exposition. Seoul, 2016, pp. 1.
19 Jiang R, Yang L W, Liu H T, et al. Journal of the American Ceramic Society, 2018, 101, 3168.
20 Jiang R. Preparation and performance of continuous alumina fiber reinforced alumina matrix composites. Ph. D. Thesis, National University of Defense Technology, China, 2019 (in Chinese).
姜如. 连续氧化铝纤维增强氧化铝基复合材料的制备与性能研究. 博士学位论文, 国防科技大学, 2019.
21 Yang Z M, Yang J J. Journal of the European Ceramic Society, 2020, 40, 1549.
22 Yang Z M, Liu H. Ceramics International, 2020, 40, 6029.
23 Yang Z M, Liu H. Materials Science and Engineering:A, 2020, 769, 138494.
24 Jiang R, Sun X, Liu H T, et al. Journal of the European Ceramic Society, 2021, 41, 5394.
25 He M Y, Hutchinson J W. Journal of Solids and Structures, 1989, 25 (9), 1053.
26 Wang Y, Liu H T, Cheng H F, et al. Journal of Inorganic Materials, 2014, 29(7), 673 (in Chinese).
王义, 刘海韬, 程海峰, 等. 无机材料学报, 2014, 29(7), 673.
27 Krenkel W, Reichert T F. In:Comprehensive composite materials II, Beaumont P W R, Zweben C H, ed., Elsevier, Amsterdam, 2018, pp.1.
28 Xu Z K, Sun X H, Xiong K Z, et al. Ceramics International, 2021, 47, 5896.
29 Zhang J, Liu R J, Wang Y F, et al. Journal of the Chinese Ceramic Society, 2021, 49(9), 1869 (in Chinese).
张金, 刘荣军, 王衍飞, 等. 硅酸盐学报, 2021, 49(9), 1869.
30 Levi C G, Yang J Y, Dalgleish B J, et al. Journal of the American Ceramic Society, 1998, 84, 2077.
31 Holmquist M G, Lange F F. Journal of the American Ceramic Society, 2003, 86, 1733.
32 Ramdane C B, Julian-Jankowiak A, Valle R, et al. Journal of the European Ceramic Society, 2017, 37, 2919.
33 Kiser J D, Bansal N P, Ursic J, et al. In:Proceedings of ASME Turbo Expo 2015:Turbine Technical Conference and Exposition. Montreal, 2015, pp. 1.
34 Gerendas M, Wilhelmi C, Machry T, et al. In:Proceedings of ASME Turbo Expo:Turbine Technical Conference and Exposition, San Antonio, 2013, pp. 1.
35 Rudinger A, Noeth A, Pritzkow W. Ceramics Application, 2015, 3(2), 48.
36 Puchas G, Mockel S, Krenkel W. Journal of the European Ceramic Society, 2020, 40, 5930.
37 Scola A, Eberling-Fux N, Turenne S, et al. Journal of the American Ceramic Society, 2019, 102, 3256.
38 Tontisakis A, Simpson W, Lincoln J, et al. Ceramics International, 2021, 47, 5347.
39 Aparicio I E, Fishpool D T, Diaz V R, et al. Journal of the European Ceramic Society, 2022, 42, 2420.
40 Ruggles-Wrenn M B, Minor S N, Przybyla C P, et al. International Journal of Applied Ceramic Technology, 2019, 16(1), 3.
41 Broutelle M, Lachaud F, Barroerre L, et al. Composite Structures, 2020, 236, 111902.
42 Silveira A D. Temperature performance of two oxide-based ceramic composites. Ph.D. Thesis, University of Bremen, Germany, 2016.
43 Hay R S, Fair G E, Tidball T. Journal of the American Ceramic Society, 2015, 98(6), 1907.
44 Zamani S M M, Behdinan K. Composites Part B:Engineering, 2019, 172, 299.
45 Ruggles-Wrenn M B, Lanser R L. Materials Science and Engineering A, 2016, 659, 270.
46 Liu X F, Liu H L, Huang C Z, et al. Ceramics International, 2017, 43, 1160.
47 AlmeidaA R S M, Bergmuller E L, Luhrs H, et al. Journal of the American Ceramic Society, 2017, 100 (9), 4101.
48 Schmucker M, Mechnich P. Journal of the American Ceramic Society, 2008, 91, 1306.
49 Schmucker M, Mechnich P. Journal of the American Ceramic Society, 2010, 93, 1888.
50 Ramachandran K, Leelavinodhan S, Aatao C, et al. Journal of the European Ceramic Society, 2022, 42, 1626.
51 Askarinejad S, Rahbar N, Sabelkin V, et al. Composite Structures, 2015, 127, 77.
52 Parthasarathy T A, Cinibulk M K, Zawada L P. Journal of the American Ceramic Society, 2010, 89(4), 1373.
53 Fantozzi G, Dominguez-Rodriguez A. In:Encyclopedia of materials:technical ceramics and glasses, Pomeroy M. Elsevier, Amsterdam, 2021, pp. 891.
54 Armani C J, Ruggles-Wrenn M B, Fair G E et al. International Journal of Applied Ceramic Technology, 2013, 10(2), 276.
55 Armani C J, Ruggles-Wrenn M B, Hay R S, et al. Acta Materialia, 2013, 61(16), 6114.
56 Deléglise F, Berger M H, Jeulin D, et al. Journal of the European Ceramic Society, 2001, 21, 569.
57 Zawada L P, Hay R S, Lee S S et al. Journal of the American Ceramic Society, 2010, 86(6), 981
58 Ruggles-Wrenn M B, Mall S, Eber C A, et al. Composites Part A:Applied Science and Manufacturing, 2006, 37(11), 2029.
59 Ruggles-Wrenn M B, Siegert G T, Baek S S. Composites Science and Technology, 2008, 68(6), 1588.
60 Wannaparhun S, Seal S. Journal of the American Ceramic Society, 2003, 86(9), 1628
61 Morscher G N, Parthasarathy T A, Cinibulk M K. In:Comprehensive composite materials II, Beaumont P W R, Zweben C H, ed., Elsevier, Amsterdam, 2018, pp. 158.
62 Yang Z M, Pei C H, Yan H, et al. Material Design and Processing Communications, 2020, 2, 129.
63 Ruggles-Wrenn M B, Hetrick G, Baek S S. International Journal of Fatigue, 2008, 30, 502.
64 Mehrman J M, Ruggles-Wrenn M B, Baek S S. Composites Science and Technology, 2007, 67(7-8), 1425.
65 Mizuno M, Zhu S, Nagano Y, et al. Journal of the American Ceramic Society, 2010, 79(12), 3065.