碳纳米管对3D打印混凝土流变性能及力学性能的影响

doi:10.11896/cldb.21080137

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (6926KB)
Export: BibTeX | EndNote (RIS)

Abstract Carbon nanotubes(MWCNTs)are nanomaterials with excellent performance. Carbon nanotubes have a significant influence on the formation and propagation of microcracks in the matrix of 3D printed concrete ( 3DPC ) and the macroscopic mechanical properties of 3D printed concrete. In addition, carbon nanotubes affect the rheological properties of fresh 3D printed concrete. The effect of the carbon nanotubes content on the rheological and mechanical properties of the 3D printed concrete was studied by setting 6 types of carbon nanotube content (0%, 0.01%, 0.02%, 0.05%, 0.08%, 0.1%). According to the SEM test results, a microscopic analysis was carried out. The results show that with the increase of carbon nanotube content, the fluidity of 3D printed concrete gradually decreases, and the static yield stress and dynamic yield stress gradually increase. The flexural strength of 3D printed concrete rises as the increase of carbon nanotube content. The compressive strength first increases and then decreases with the increase of carbon nanotube content. When the carbon nanotube content is 0.05%, the compressive strength of the printed specimen is the largest. Carbon nanotubes can play a role of bridging and filling, and be closely connected with the matrix to prevent the formation and expansion of micro-cracks and holes. The microstructure of 3D printed concrete could be significantly improved at a lower carbon nanotube content (no more than 0.05%).

Key words： 3D printed concrete carbon nanotube rheological property mechanical property

Published: Online: 2023-03-27

CLC number:

TU528

Fund:National Natural Science Foundation of China(U1504513, U1905216), and Key Scientific Research Projects of Higer Education Department of Henan Province of China (22A560002).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Yu
	WU Xikai
	ZHU Lingli
	YANG Zhang
	YANG Ruofan
	GUAN Xuemao

Cite this article:

ZHAO Yu,WU Xikai,ZHU Lingli, et al. Effect of Carbon Nanotubes on the Rheological and Mechanical Properties of 3D Printed Concrete[J]. Materials Reports, 2023, 37(6): 21080137-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21080137 OR http://www.mater-rep.com/EN/Y2023/V37/I6/21080137

1 Ngo T D, Kashani A, Imbalzano G, et al. Composites Part B: Engineering, 2018, 143, 172.
2 Ma J W, Jiang Z W, Su Y F. Concrete World, 2014(7), 41(in Chinese).
马敬畏, 蒋正武, 苏宇峰. 混凝土世界, 2014(7), 41.
3 Tay Y W D, Panda B, Paul S C, et al. Virtual and Physical Prototyping, 2017, 12(3), 261.
4 Wu P, Wang J, Wang X Y. Automation in Construction, 2016, 68, 21.
5 Mechtcherine V, Grafe J, Nerella V N, et al. Construction and Building Materials, 2018, 179, 125.
6 Zhao Y, Liu W S, Wang H, et al. Materials Reports, 2020, 34(S2), 1217(in Chinese).
赵颖, 刘维胜, 王欢, 等. 材料导报, 2020, 34(S2), 1217.
7 Schutter G D, Lesage K, Mechtcherine V, et al. Cement and Concrete Research, 2018, 112, 25.
8 Soltan D G, Li V C. Cement and Concrete Composites, 2018, 90, 1.
9 Ogura H, Nerella V N, Mechtcherine V. Materials, 2018, 11(8), 1375.
10 Le T T, Austin S A, Lim S. Materials and Structure, 2012, 45(8), 1221.
11 Hambach M, Möller H, Neumann T, et al. Cement and Concrete Research, 2016, 89, 80.
12 Al-Qutaifi S, Nazari A, Bagheri A. Construction and Building Materials. 2018, 176, 690.
13 Behzad N, Praful V, Jay S, et al. Materials, 2018, 11, 12.
14 Chan L Y, Andrawes B. Computational Materials Science, 2010, 47(4), 994.
15 Niu D T, He J Q, Fu Q T, et al. Journal of the Chinese Ceramic Society, 2020, 48(5), 705(in Chinese).
牛荻涛, 何嘉琦, 傅强碳, 等. 硅酸盐学报, 2020, 48(5), 705.
16 Liu Q L, Sun W, Sun B, et al. Journal of Southeast University(Natural Science Edition), 2014, 44(3), 662(in Chinese).
刘巧玲, 孙伟, 孙波, 等. 东南大学学报(自然科学版), 2014, 44(3), 662.
17 Konsta-Gdoutos M S, Metaxa Z S, Shah S P. Cement and Concrete Research, 2010, 40(7), 1052.
18 Morsy M S, Alsayed S H, Aqel M. Construction and Building Materials, 2010, 25(1), 145.
19 Chaipanich A, Nochaiya T, Wongkeo W, et al. Materials Science and Engineering A, 2010, 527(4-5), 1063.
20 Tramontin S M, Maia F I, Elisângela G M, et al. Journal of Building Engineering, 2020, 32, 101833.
21 Jiao Z K, Wang D M, Wang Q B, et al. Bulletin of the Chinese Ceramic Society, 2021, 40(6), 1821(in Chinese).
焦泽坤, 王栋民, 王启宝, 等. 硅酸盐通报, 2021, 40(6), 1821.
22 Long W J, Tao J L, Lin C, et al. Journal of Cleaner Production, 2019, 239, 118054.
23 Nerella V N, Näther M, Iqbal A, et al. Cement and Concrete Composites, 2019, 95, 260.
24 Zhang Y, Zhang Y S, She W, et al. Construction and Building Materials, 2019, 201, 278.
25 Le T T, Austin S A, Lim S. Materials and Structure, 2012, 45(8), 1221.
26 Zhu P, Deng G H, Shao X D. Materials Reports A : Review Papers, 2018, 32(1), 149(in Chinese).
朱平, 邓广辉, 邵旭东. 材料导报:综述篇, 2018, 32(1), 149.
27 Zhang X, Zhang L. Fly Ash Comprehensive Utilization, 2013(4), 9(in Chinese).
张雄, 张蕾. 粉煤灰综合利用, 2013(4), 9.
28 Musso S, Tulliani J M, Ferro G, et al. Composites Science & Technology, 2009, 69(11-12), 1985.
29 Parveen S, Rana S, Fangueiro R, et al. Journal of Nanomaterials, 2013, 2013(7), 80.