利用等离子喷涂制备C/C复合材料表面耐烧蚀抗氧化涂层的研究进展

doi:10.11896/cldb.21050162

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7539KB)
Export: BibTeX | EndNote (RIS)

Abstract The rapid development of science and technology have posed higher performance requirements on thermal protection materials. As a new type of lightweight high-temperature structural material, C/C composite possesses excellent high-temperature mechanical properties, making it an ideal candidate material for supersonic aircraft such as aviation, aerospace, and intercontinental ballistic missiles. However, its application has been greatly restricted due to its disadvantages of long production cycle, high production cost, and poor oxidation at high temperatures. The anti-oxidation coatings prepared by plasma spraying technology have been proved to be economic, efficient and convenient, which signify the materials' great development potential and strategic value. In recent years, global research of plasma spraying anti-oxidation coatings on surface of C/C composite material have mainly focused on the optimization of coating-substrate interface, the exploration of appropriate spraying process parameters for different coatings, and the preparation of multiphase coatings. This review gives a comprehensive description on research progress of plasma spraying anti-ablation and anti-oxidation coatings from the above-mentioned aspects.

Key words： C/C composite plasma spraying ceramic coating metal coating anti-ablation performance anti-oxidation performance

Published: Online: 2023-03-27

CLC number:

TB304

Fund:National Defense Science and Technology Innovation Special Zone Project (19H86303ZD102006).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Xizhi
	CUI Hong
	HU Yang
	DENG Hongbing

Cite this article:

ZHANG Xizhi,CUI Hong,HU Yang, et al. Research Progress of Plasma Spraying Preparation of C/C Composite Coatings with Ablation and Oxidation Resistance[J]. Materials Reports, 2023, 37(6): 21050162-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21050162 OR http://www.mater-rep.com/EN/Y2023/V37/I6/21050162

1 Zhu Y, Hu Y, Cui H, et al. Ceramics International, 2021, 47(5), 6554.
2 Fahrenholtz W G, Hilmas G E. Scripta Materialia, 2017, 129, 94.
3 Jin X, Fan X, Lu C, et al. Journal of the European Ceramic Society, 2018, 38 (1), 1.
4 Tang S, Hu C. Journal of Materials Science & Technology, 2017, 33(2), 117.
5 Windhorst T, Blount G. Materials & Design, 1997, 18(1), 11.
6 Ruan Q, Li R Z, Xue P F, et al. Aerospace Manufacturing Technology, 2020(5), 66(in Chinese).
阮强, 李瑞珍, 薛朋飞, 等. 航天制造技术, 2020(5), 66.
7 Yin Z, Tao S, Zhou X, et al. Journal of the European Ceramic Society, 2008, 28(6), 1143.
8 Lashmi P G, Ananthapadmanabhan P V, Unnikrishnan G, et al. Journal of the European Ceramic Society, 2020, 40(8), 2731.
9 Gulyaev I P, Kuzmin V I, Kornienko E E, et al. Journal of Physics Conference Series, DOI:10.1088/1742-6596/1393/1/012085.
10 Xue C X, Zhu Y L. Bulletin of the Chinese Ceramic Society, 2012, 31(4), 884(in Chinese).
薛春霞, 朱云龙. 硅酸盐通报, 2012, 31(4), 884.
11 Wang C C, Li K Z, He D Y, et al. Ceramics International, 2019, 45 (17), 21960.
12 Gu S, Zhang S, Liu F, et al. Applied Surface Science, 2018, 455, 849.
13 Guo L J, Peng J, Wang H Q, et al. Journal of Alloys and Compounds, 2017, 703, 560.
14 Wang L, Fu Q G, Liu N K, et al. Journal of Thermal Spray Technology, 2016, 25 (7), 1280.
15 Lu G M. Fundamental research on plasma spraying process for bevel coating. Master's Thesis, Xinjiang University, China, 2018 (in Chinese).
路广明. 斜面涂层的等离子喷涂工艺基础研究. 硕士学位论文, 新疆大学, 2018.
16 Zou K, Zou J P, Deng C M, et al. Transactions of Nonferrous Metals Society of China, 2021, 31(1), 243.
17 Wang J W, Liu M, Deng C M, et al. Equipment Enviromental Engineering, 2016, 13(3), 43 (in Chinese).
王佳文, 刘敏, 邓春明, 等. 装备环境工程, 2016, 13(3), 43.
18 Krenkel W, Berndt F. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2005, 412(1-2), 177.
19 Bartuli C, Valente T, Tului M. Surface & Coatings Technology, 2002, 155(2-3), 260.
20 Tului M, Marino G, Valente T. Surface & Coatings Technology, 2006, 201(5), 2103.
21 Hu C, Niu Y, Li H, et al. Journal of Thermal Spray Technology, 2012, 21(1), 16.
22 Wang C, Li K, He Q, et al. Materials & Design, 2018, 152, 40.
23 Yao X, Li H, Zhang Y, et al. Journal of Thermal Spray Technology, 2013, 22 (4), 531.
24 Hu D, Fu Q, Liu T, et al. Journal of the European Ceramic Society, 2020, 40 (2), 212.
25 Li K, Liu G, Zhang Y. Surface & Coatings Technology, 2019, 357, 48.
26 Kang B R, Kim H S, Oh P Y, et al. Materials, 2019, 12(5), 747.
27 Yao D J, Li H J, Wu H, et al. Journal of the European Ceramic Society, 2016, 36(15), 3739.
28 Yang Y, Li K Z, Zhao Z G, et al. Advances in Applied Ceramics, 2016, 115 (8), 473.
29 Feng G, Li H, Yao X, et al. Surface & Coatings Technology, 2020, 400.
30 Yang Y, Li K, Zhao Z, et al. Ceramics International, 2017, 43 (1), 1495.
31 Wang Y J, Li H J, Fu Q G, et al. Ceramics International, 2013, 39(1), 359.
32 Guo L J, Peng J, Kou G, et al. Ceramics International, 2017, 43(12), 8989.
33 Wang C C, Li K Z, He D Y, et al. Applied Surface Science, 2020, 506, 144776.
34 Han W, Liu M, Deng C, et al. Rare Metal Materials and Engineering, 2018, 47(4), 1043.
35 Zou B, Khan Z S, Gu L, et al. Corrosion Science, 2012, 62, 192.
36 Ying W, Binglin Z, Xizhi F, et al. Key Engineering Materials, 2013, 537, 36.
37 Zou B, Hui Y, Huang W, et al. Journal of the European Ceramic Society, 2015, 35(7), 2017.
38 Zhang J P, Fu Q G, Zhang P F, et al. Surface & Coatings Technology, 2016, 285, 24.
39 Hu C, Niu Y, Li H, et al. Surface & Coatings Technology, 2013, 217, 105.
40 Huo C, Guo L, Zhou L, et al. Journal of Alloys and Compounds, 2018, 752, 489.
41 Parthasarathy T A, Rapp R A, Opeka M, et al. Acta Materialia, 2007, 55 (17), 5999.
42 Wang L L, Yan L S, Guo C Y, et al. Acta Materiae Compositae Sinica, 2020, 37(9), 2250(in Chinese).
王玲玲, 闫联生, 郭春园, 等. 复合材料学报, 2020, 37(9), 2250.
43 Wei X, Li J W, Zhang W G. Equipment Enviromental Engineering, 2016, 13(3), 12(in Chinese).
魏玺, 李捷文, 张伟刚. 装备环境工程, 2016, 13(3), 12.
44 Xu L, Cheng J, Li X, et al. Journal of the American Ceramic Society, 2018, 101 (9), 3830.
45 Hu C, Niu Y, Huang S, et al. Journal of Alloys and Compounds, 2015, 646, 916.
46 Ma H, Miao Q, Liang W, et al. Ceramics International, 2021, 47(5), 6728.
47 Xu J, Liu Y, Ma Z, et al. Ceramics International, 2021, 47(1), 400.
48 Li J, Zhang Y, Wang H, et al. Journal of Alloys and Compounds, 2020, 824.
49 Choury J J. In: 12th Propulsion Conference. Palo Alto, CA, USA, 1976.
50 Zhang Y, Zhou S M, Xia J T. Carbon Techniques, 2004(4), 20(in Chinese).
张勇, 周声劢, 夏金童. 炭素技术, 2004(4), 20.
51 Choi S D, Seo H I, Lim B J, et al. Composites Research, 2018, 31(5), 260.
52 Huo C, Guo L, Wang C, et al. Ceramics International, 2019, 45(2), 1777.
53 Ren J, Zhang Y, Fu Y, et al. Surface & Coatings Technology, 2018, 344, 250.
54 Balani K, Gonzalez G, Agarwal A, et al. Journal of the American Ceramic Society, 2006, 89(4), 1419.
55 Pu H, Niu Y, Hu C, et al. Ceramics International, 2015, 41(9), 11387.
56 Savage. Carbon-carbon composites, Chapman and Hall, London, 1993.
57 Cai Z Y, Shen H T, Liu S N, et al. The Chinese Journal of Nonferrous Metals, 2020, 30 (9), 1991(in Chinese).
蔡圳阳, 沈鸿泰, 刘赛男, 等. 中国有色金属学报, 2020, 30(9), 1991.
58 Jie H Z, Cui H, Li R Z, et al. Materials Reports, 2015, 29(S1), 53(in Chinese).
解惠贞, 崔红, 李瑞珍, 等. 材料导报, 2015, 29(S1), 53.
59 Qiu Z M. Solid rocket motor materials and technology, China Astronautic Publishing Hous, China, 1995, pp. 495 (in Chinese).
丘哲明. 固体火箭发动机材料与工艺, 中国宇航出版社, 1995, pp.495.
60 Zhu Y, Sun J T, Yan L S, et al. Journal of Functional Materials, 2019, 50(6), 6206(in Chinese).
朱阳, 孙建涛, 闫联生, 等. 功能材料, 2019, 50(6), 6206.
61 Tokunaga K, Kubota Y, Noda N, et al. Fusion Engineering and Design, 2006, 81(1-7), 133.
62 Zhou Z, Wang Y, Gong J, et al. Journal of Thermal Spray Technology, 2016, 25(8), 1657.
63 Zhou Z, Sun Z, Wu H, et al. Advanced Engineering Materials, 2018, 20(5).
64 Zhou Z, Niu F, Hu X, et al. Advanced Engineering Materials, 2021, 23(6), 2001457.
65 Lipke D W, Zhang Y S, Liu Y J, et al. Journal of the European Ceramic Society, 2010, 30(11), 2265.
66 Wang S, Zhu Y L, Chen H M, et al. Ceramics International, 2014, 40(5), 7307.
67 Guo L J, Peng J, Guo C, et al. Vacuum, 2017, 143, 262.
68 Liu Y B, Wang Q S, Ma Z, et al. Materials Research Innovations, 2014, 18, 1017.
69 Wen B, Ma Z, Liu Y, et al. Ceramics International, 2014, 40(8), 11825.