| INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
| Review of Porous Materials Derived from Using the Directional Freeze-casting Technique and Their Applications |
| YU Yanfei1, WANG Xuan1,2, GAO Xin3,*, NING Feng3, ZHANG Haopeng3, YUE Hongyan3
|
1 School of Electrical and Electronic Engineering, Harbin University of Science and Technology, Harbin 150080, China
2 Key Laboratory of Engineering Dielectrics and Its Application, Harbin University of Science and Technology, Harbin 150080, China
3 School of Materials Science and Chemical Engineering, Harbin University of Science and Technology, Harbin 150040, China |
|
|
|
Abstract Directional freeze casting is a method that uses the "liquid-solid-gas" phase transformation of solvents to obtain porous materials by uniformly mixing raw materials, solvents and additives. It has the advantages of simple operation and green environmental protection. Different from the usual pore-making technology, it offers a high degree of control over the physical, chemical and mechanical properties of materials, where the materials prepared by this technology have oriented pores and hierarchical structures at different levels. Because of these characteristics, this technique is widely used in anisotropic porous inorganic, organic, hybrid and carbonaceous materials. This method can also be extended to simulate the structures of natural materials to assemble porous composites with excellent mechanical and physical properties. Finally, the method offers wide application prospects in fields such as environmental science, energy, thermal management and biology.
In this paper, based on the origins and principles of directional freezing technology, the formation mechanism of a directional structure is revealed based on the force model of single and multiple particles. The effects of the solute, solvent, temperature gradient, and additives on a structure and on the properties of the materials are analyzed. In addition, according to the different means of doping modification of precursor materials, the characteristics of directional structures prepared by one-step and two-step methods are introduced. Simultaneously, the research progress of directional freezing technology in pollutant adsorption, energy storage and conversion, structural materials, thermal management, and biomaterials are summarized. Finally, the problems that must be solved in the current research are briefly described, and future developmental directions are proposed.
|
|
Published: 10 March 2023
Online: 2023-03-14
|
|
|
| Fund:Chunhui Plan', Ministry of Education of China(HLJ2019007), Outstanding Youth Project of ‘Technology Talents' Program of Harbin University of Science and Technology(LGYC2018JQ012), and Fundamental Research Foundation for University of Heilongjiang Province(2019-KYYWF-0239). |
|
|
1 Yang X Y, Chen L H, Li Y, et al. Chemical Society Reviews, 2017, 46(2), 481.
2 Sing K S W. Pure and Applied Chemistry, 1982, 54(11), 2201.
3 Roberts A D, Li X, Zhang H F. Chemical Society Reviews, 2014, 43(13), 4341.
4 Al-Muhtaseb S A, Ritter J A. Advanced Materials, 2003, 15(2), 101.
5 Dutta S, Bhaumik A, Wu K C W. Energy & Environmental Science, 2014, 7(11), 3574.
6 Fechler N, Fellinger T P, Antonietti M. Advanced Materials, 2013, 25(1), 75.
7 Lee J, Kim J, Hyeon T. Advanced Materials, 2006, 18(16), 2073.
8 Liang C D, Li Z J, Dai S. Angewandte Chemie-International Edition, 2008, 47(20), 3696.
9 Titirici M M, White R J, Brun N, et al. Chemical Society Reviews, 2015, 44(1), 250.
10 Zhang H F, Cooper A I. Soft Matter, 2005, 1(2), 107.
11 Triantafillidis C, Elsaesser M S, Husing N. Chemical Society Reviews, 2013, 42(9), 3833.
12 Galassi C. Journaal of the European Ceramic Society, 2006, 26(14), 2951.
13 Lu Z Q H, Zhou Y C. Journal of Materials Science:Materials in Medicine, 1998, 9, 583.
14 Sofie S W, Dogan F. Journal of the American Ceramic Society, 2001, 84(7), 1459.
15 Fukasawa T, Ando M. Journal of the American Ceramic Society, 2001, 84(1), 230.
16 Deville S, Saiz E, Nalla R K, et al. Science, 2006, 311(5760), 515.
17 Deville S. Advanced Engineering Materials, 2008, 10(3), 155.
18 Shao G F, Hanaor D A H, Shen X D, et al. Advanced Materials, 2020, 32(17), 1907176.
19 Barrow M, Eltmimi A, Ahmed A, et al. Journal of Materials Chemistry, 2012, 22(23), 11615.
20 Zhang H F. Ice templating and freeze-drying for porous materials and their applications, Wiley-VCH, UK, 2018.
21 Searles J A, Carpenter J F, Randolph T W. Journal of Pharmaceutical Sciences, 2001, 90(7), 860.
22 Wegst U G K, Schecter M, Donius A E, et al. Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, 2010, 368(1917), 2099.
23 Hahbazi M A S, Ghalkhani M, Maleki H. Advanced Engineering Materials, 2020, 22(7), 2000033.
24 Deville S. Journal of Materials Research, 2013, 28(17), 2202.
25 Roberts A D, Wang S X, Li X, et al. Journal of Materials Chemistry A, 2014, 2(42), 17787.
26 Zhang H F, Hussain I, Brust M, et al. Nature Materials, 2005, 4(10), 787.
27 Qian L, Zhang H F. Journal of Chemical Technology and Biotechnology, 2011, 86(2), 172.
28 Libbrecht K G. Annual Review of Materials Research, 2017, 47, 271.
29 Zhang H F, Wang D, Butler R, et al. Nature Nanotechnology, 2008, 3(8), 506.
30 Okaji R, Taki K, Nagamine S, et al. Journal of Applied Polymer Science, 2013, 130(1), 526.
31 Li R J, Zhang X T, Dong H L, et al. Advanced Materials, 2016, 28(8), 1697.
32 Deville S, Adrien J, Maire E, et al. Acta Materialia, 2013, 61(6), 2077.
33 Marcellini M, Noirjean C, Dedovets D, et al. ACS Omega, 2016, 1(5), 1019.
34 Tai K P, Liu Y, Dillon S J. Microscopy and Microanalysis, 2014, 20(2), 330.
35 He Z Y, Liu K, Wang J J. Accounts of Chemical Research, 2018, 51(5), 1082.
36 Deville S. Materials, 2010, 3(3), 1913.
37 Gutierrez M C, Ferrer M L, del Monte F. Chemistry of Materials, 2008, 20(3), 634.
38 Bai H, Chen Y, Delattre B, et al. Science Advances, 2015, 1(11), 1500849.
39 Zhang P P, Li J, Lv L X, et al. ACS Nano, 2017, 11(5), 5087.
40 Bai H, Walsh F, Gludovatz B, et al. Advanced Materials, 2016, 28(1), 50.
41 Tang Y F, Miao Q, Qiu S, et al. Journal of the European Ceramic Society, 2014, 34(15), 4077.
42 Wang C H, Chen X, Wang B, et al. ACS Nano, 2018, 12(6), 5816.
43 Munch E, Saiz E, Tomsia A P, et al. Journal of the American Ceramic Society, 2009, 92(7), 1534.
44 Delattre B, Bai H, Ritchie R O, et al. ACS Applied Materials & Interfaces, 2014, 6(1), 159.
45 Santos L N R M, Silva J R S, Cartaxo J M, et al. Cermica, 2021, 67(381), 1.
46 Ricciardi R, Auriemma F, Gaillet C, et al. Macromolecules, 2004, 37(25), 9510.
47 Willcox P J, Howie D W, Shimidt-Rohr K, et al. Journal of Polymer Science Part B:Polymer Physics, 1999, 37, 3438.
48 Tripathi A, Kathuria N, Kumar A. Journal of Biomedical Materials Research Part A, 2009, 90(3), 680.
49 Wu J J, Zhao Q, Liang C Z, et al. Soft Matter, 2013, 9(46), 11136.
50 Dogu S, Okay O. Polymer, 2008, 49(21), 4626.
51 Wat A, Lee J I, Ryu C W, et al. Nature Communications, 2019, 10, 961.
52 Yao Y M, Sun J J, Zeng X L, et al. Small, 2018, 14(13), 1704044.
53 Wang Z Y, Shen X, Han N M, et al. Chemistry of Materials, 2016, 28(18), 6731.
54 Munch E, Launey M E, Alsem D H, et al. Science, 2008, 322(5907), 1516.
55 D'Elia E, Barg S, Ni N, et al. Advanced Materials, 2015, 27(32), 4788.
56 Du G L, Mao A R, Yu J H, et al. Nature Communications, 2019, 10, 800.
57 Gannon P, Sofie S, Deibert M, et al. Journal of Applied Electrochemistry, 2009, 39(4), 497.
58 Nardecchia S, Serrano M C, Gutierrez M C, et al. Advanced Functional Materials, 2012, 22(21), 4411.
59 Ouyang A, Cao A Y, Hu S, et al. ACS Applied Materials & Interfaces, 2016, 8(17), 11179.
60 Klotz M, Weber M, Deville S, et al. Frontiers in Materials, 2018, 5, 00028.
61 Sahoo P K, Kumar N, Thiyagarajan S, et al. ACS Sustainable Chemistry & Engineering, 2018, 6(6), 7475.
62 Fan X Q, Yang Y, Shi X L, et al. Advanced Functional Materials, 2020, 30(52), 2007110.
63 Xiao J L, Lv W Y, Song Y H, et al. Chemical Engineering Journal, 2018, 338, 202.
64 Yu R M, Shi Y Z, Yang D Z, et al. ACS Applied Materials & Interfaces, 2017, 9(26), 21809.
65 Ouyang A, Wang C H, Wu S T, et al. ACS Applied Materials & Interfaces, 2015, 7(26), 14439.
66 Ouyang A, Liang J. RSC Advances, 2014, 4(49), 25835.
67 Zhang R J, Hu R R, Li X M, et al. Advanced Functional Materials, 2018, 28(23), 1870161.
68 Yang J, Xia Y F, Xu P, et al. Cellulose, 2018, 25(6), 3533.
69 Jiang Y, Chen Y, Liu Y J, et al. Chemical Engineering Journal, 2018, 337, 522.
70 Mi H Y, Jing X, Politowicz A L, et al. Carbon, 2018, 132, 199.
71 Li C, Wu Z Y, Liang H W, et al. Small, 2017, 13(25), 1700453.
72 Qiu L, Huang B, He Z J, et al. Advanced Materials, 2017, 29(36), 1701553.
73 Yao Y M, Li Y M, Zeng X L, et al. Journal of Materials Chemistry A, 2018, 6(14), 5984.
74 Liao S C, Zhai T L, Xia H S. Journal of Materials Chemistry A, 2016, 4(3), 1068.
75 Barg S, Perez F M, Ni N, et al. Nature Communications, 2014, 5, 4328.
76 Sai H Z, Fu R, Xing L, et al. ACS Applied Materials & Interfaces, 2015, 7(13), 7373.
77 Chaichanawong J, Kongcharoen K, Areerat S. Advanced Powder Technology, 2013, 24(5), 891.
78 Zhao Z D, Sun M Q, Chen W J, et al. Sandwich Advanced Functional Materials, 2019, 29(16), 1809196.
79 Pan Z Z, Lv W, He Y B, et al. Advanced Science, 2018, 5(6), 1800384.
80 Kong J, Xiong G P, Bo Z, et al. Chemelectrochem, 2019, 6(10), 2788.
81 Shao Y L, El-Kady M F, Lin C W, et al. Advanced Materials, 2016, 28(31), 6719.
82 He Z M, Liu J, Qiao Y, et al. Nano Letters, 2012, 12(9), 4738.
83 Katuri K, Ferrer M L, Gutierrez M C, et al. Energy & Environmental Science, 2011, 4(10), 4201.
84 Gutierrez M C, Hortiguela M J, Amarilla J M, et al. Journal of Physical Chemistry C, 2007, 111(15), 5557.
85 Huang C, Leung C L A, Leung P, et al. Advanced Energy Materials, 2021, 11(1), 2002387.
86 Lichtner A Z, Jauffres D, Martin C L, et al. Journal of the American Ceramic Society, 2013, 96(9), 2745.
87 Moon J W, Hwang H J, Awano M, et al. Materials Letters, 2003, 57, 1428
88 Chen Y, Zhang Y X, Baker J, et al. ACS Applied Materials & Interfaces, 2014, 6(7), 5130.
89 Li D Y, Li M S. Journal of Materials Science & Technology, 2012, 28(9), 799.
90 Hammel E C, Ighodaro O L R, Okoli O I. Ceramics International, 2014, 40(10), 15351.
91 Fukushima M, Yoshizawa Y. Advanced Powder Technology, 2016, 27(3), 908.
92 Wang Z, Feng P Z, Wang X H, et al. Ceramics International, 2016, 42(10), 12414.
93 Maleki H, Fischer T, Bohr C, et al. Biomacromolecules, 2021, 22(4), 1739.
94 Yang P, Xia T, Ghosh S, et al. 2D Materials, 2021, 8(2), 025022.
95 Liu H, Li L Y, Li J T, et al. Ceramics International, 2021, 47(6), 8593.
96 Naglieri V, Gludovatz B, Tornsia A P, et al. Acta Materialia, 2015, 98, 141.
97 Hu Z J, Guo R F, Chen S M, et al. Scripta Materialia, 2020, 186, 312.
98 Knöller A, Kilper S, Diem A M, et al. Nano Letters, 2018, 18(4), 2519.
99 Chau M, De France K J, Kopera B, et al. Chemistry of Materials, 2016, 28(10), 3406.
100 Maleki H, Shahbazi M A, Montes S, et al. ACS Applied Materials & Interfaces, 2019, 11(19), 17256.
101 Wang L H, Qiu Y Y, Lv H J, et al. Advanced Functional Materials, 2019, 29(31), 1901407.
102 Zhang Y, Chen L J, Zeng J, et al. Materials Science & Engineering C-Materials for Biological Applications, 2014, 39, 143.
103 Meurice E, Bouchart F, Hornez J C, et al. Journal of the European Ceramic Society, 2016, 36(12), 2895.
104 Kim D H, Kim K L, Chun H H, et al. Ceramics International, 2014, 40(6), 8293.
105 Xia Z, Villa M M, Wei M. Journal of Materials Chemistry B, 2014, 2(14), 1998.
106 Deville S, Saiz E, Tomsia A P. Biomaterials, 2006, 27(32), 5480.
107 Yin K Y, Mylo M D, Speck T, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 110, 103826. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
