高通量开发非晶合金的研究进展<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.017.016

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (1554KB)
Export: BibTeX | EndNote (RIS)

Abstract Reforming the traditional research methods for developing amorphous alloy compositions, accelerating the process of amorphous alloy from research to application, have became the urgent needs in the research field of the amorphous alloys. High-throughput experimental technology, as one of the three major elements in the “materials genome project” proposed by United States government in June 2011, can prepare and characterize a large number of samples in a short time, can at least double the speed of materials from discovery to application, lower the cost at least a half. High-throughput experiments can accelerate the screening and optimizing of amorphous alloy compositions. Its importance is highlighted in the research field of amorphous alloy. This paper firstly give a brief review of the traditional designing methods of developing amorphous alloy compositions, and then introduces the progress of the research on the developing of amorphous alloys by high-throughput experimental methods, and then briefly analyzes the challenges of high-throughput experimental techniques in the study of amorphous alloys.

Key words： amorphous alloy high-throughput composition development

Published: 07 May 2018

CLC number:

O751

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LU Yunzhuo
	QIN Zuoxiang
	LU Xing

Cite this article:

LU Yunzhuo,QIN Zuoxiang,LU Xing. Current Research Status of High-throughput Development of Amorphous Alloys[J]. Materials Reports, 2017, 31(17): 112-115.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.017.016 OR http://www.mater-rep.com/EN/Y2017/V31/I17/112

1 Johnson W L. Bulk glass-forming metallic alloys: Science and technology[J]. MRS Bull,1999,24(10):42.
2 Schroers J. Processing of bulk metallic glass[J]. Adv Mater,2010,22(14):1566.
3 Wang X J, Chen X D, Xia T D, et al. The current situation of amorphous alloy application[J]. Mater Rev,2006,20(10):75(in Chinese).
王晓军, 陈学定, 夏天东, 等. 非晶合金应用现状[J]. 材料导报,2006, 20(10):75.
4 Wang W H. The nature and properties of amorphous matter[J]. Prog Phys,2013, 33(5):177(in Chinese).
汪卫华. 非晶态物质的本质和特性[J]. 物理学进展,2013,33(5):177
5 Turnbull D. Under what conditions can a glass be formed?[J]. Contemp Phys, 1969,10(5):473.
6 Lu Z P, Tan H, Ng S C, et al. The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses[J]. Scr Mater, 2000,42(7):667.
7 Greer A L. Confusion by design[J]. Nature,1993,366(6453):303.
8 Egami T. Atomistic mechanism of bulk metallic glass formation[J]. J Non-Cryst Solids,2003,317(1-2):30.
9 Inoue A, Zhang T, Masumoto T. Glass-forming ability of alloys[J]. J Non-Cryst Solids,1993,156:473.
10 Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys[J]. Acta Mater,2000,48(1):279.
11 Wang Y M, Qiang J B, et al. Composition rule of bulk metallic glasses and quasicrystals using electron concentration criterion[J]. J Mater Res, 2003,18(3):642.
12 Chen W, Wang Y, Qiang J, et al. Bulk metallic glasses in the Zr-Al-Ni-Cu system[J]. Acta Mater,2003,51(7):1899.
13 Shen J, Zou J, Ye L, et al. Glass-forming ability and thermal stabi-lity of a new bulk metallic glass in the quaternary Zr-Cu-Ni-Al system[J]. J Non-Cryst Solids, 2005,351(30):2519.
14 Senkov O N, Miracle D B. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys[J]. Mater Res Bull,2001,36(12):2183.
15 Miracle D B. On the universal model for medium-range order in amorphous metal structures[J]. J Non-Cryst Solids,2003,317(1):40.
16 Wang H Z, Wang H, Ding H, et al. Progress in high-throughput materials synthesis and characterization[J]. Sci Technol Rev,2015,33(10):31(in Chinese).
王海舟, 汪洪, 丁洪, 等. 材料的高通量制备与表征技术[J]. 科技导报, 2015,33(10):31.
17 Wang H, Xiang Y, Xiang X D, et al. Materials genome enables research and development revolution[J]. Sci Technol Rev,2015,33(10):13(in Chinese).
汪洪, 向勇, 项晓东, 等. 材料基因组-材料研发新模式[J]. 科技导报,2015, 33(10):13.
18 Ding S, Gregoire J, Vlassak J J, et al. Solidification of Au-Cu-Si alloys investigated by a combinatorial approach[J]. J Appl Phys,2012,111(11):114901.
19 Tsai P, Flores K M. A laser deposition strategy for the efficient identification of glass-forming alloys[J]. Metall Mater Trans A,2015,46(9):3876.
20 Tsai P, Flores K M. A combinatorial strategy for metallic glass design via laser deposition[J]. Intermetallics,2014,55:162.
21 Tsai P, Flores K M. High-throughput discovery and characterization of multicomponent bulk metallic glass alloys[J]. Acta Mater,2016,120:426.