铝基复合材料搅拌摩擦焊研究现状

doi:10.11896/cldb.21040264

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (24143KB)
Export: BibTeX | EndNote (RIS)

Abstract Aluminum matrix composites have been widely used in the automotive and aerospace industries due to the superior properties of low density, high specific strength, high hardness, good electrical conductivity and thermal stability. Therefore, as one of the important engineering structure materials, the welding of aluminum matrix composites has been paid extensive attention by the scholars at home and abroad. However, the weldability of the aluminum matrix composites is relatively poor, which could be attributed to significant difference in the thermal expansion coefficient and thermal conductivity between additional reinforcing particles and aluminum alloy. For traditional fusion welding, it is difficult to weld aluminum matrix composites due to the poor joint quality and mechanical performance, which restricts its industrial application. Friction stir welding (FSW), as a new solid state joining method, has shown a series of advantages in case of welding aluminum matrix composites. The welded joints generally exhibit good formation and excellent mechanical performance. In recent years, FSW has received extensive interests. In this paper, the research status of friction stir welding for aluminum matrix composites is introduced, and the future research direction is prospected.

Key words： aluminum matrix composite friction stir welding joint formation microstructure mechanical property wear of FSW tool

Published: Online: 2023-01-03

CLC number:

TG457.14

Fund:National Natural Science Foundation of China(51974100, 51775143) and Shanghai International Science and Technology Collaboration Funds(18190730800).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Shikang
	ZHAO Hongyun
	LI Gaohui
	ZHOU Li
	LIU Huijie
	ZHANG Chengcong

Cite this article:

GAO Shikang,ZHAO Hongyun,LI Gaohui, et al. Research Status of Friction Stir Welding of Aluminum Matrix Composites[J]. Materials Reports, 2022, 36(24): 21040264-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21040264 OR http://www.mater-rep.com/EN/Y2022/V36/I24/21040264

1 Chao Q, Sun J F, Sun Z G, et al. Aeroengine, 2018, 44(4), 91(in Chinese).
巢青, 孙剑芬, 孙志刚, 等. 航空发动机, 2018, 44(4), 91.
2 Huo S Y, Jie L J, Xiang J F, et al. Tool Engineering, 2018, 52(10), 3(in Chinese).
霍石岩, 解丽静, 项俊锋, 等. 工具技术, 2018, 52(10), 3.
3 Surappa M K. Sadhana, 2003, 28(1), 319.
4 Salih O S, Ou H, Sun W, et al. Materials & Design, 2015, 86, 61.
5 Marie-Noëlle A, Simar A. Materials Characterization, 2016, 120, 1.
6 Meng X C, Huang Y X, Cao J, et al. Progress in Materials Science, 2021, 115, 100706
7 Storjohann D, Barabash O M, David S A, et al. Metallurgical and Materials Transactions A, 2005, 36(11), 3237.
8 Peng K, Cui H C, Lu F G, et al. Transactions of Nonferrous Metals So-ciety of China, 2011, 21(9), 1925.
9 Liu H, Hu Y, Zhao Y. Materials Letters, 2015, 158, 136.
10 Niu J, Pan L, Wang M, et al. Vacuum, 2006, 80(11-12), 1396.
11 Mishra R S, Ma Z Y. Materials Science and Engineering: Reports, 2010, 50(1-2), 1.
12 Liu H J, Feng J C, Fujii H, et al. International Journal of Machine Tools and Manufacture, 2005, 45(14), 1635.
13 Mohanty H K, Mahapatra M M, Kumar P, et al. Journal of Marine Science Application, 2012, 11, 200.
14 Chen X G, Silva M D, Gougeon P, et al. Materials Science & Enginee-ring A, 2009, 518(1-2), 174.
15 Vijay S J, Murugan N. Materials & Design, 2010, 31(7), 3585.
16 Ma Z Y, Feng A H, Xiao B L, et al. In: 5th International Conference on Processing and Manufacturing of Advanced Materials. Vancouver, 2007, pp. 3814.
17 Ni D R, Chen D L, Wang D, et al. Materials & Design, 2013, 51, 199.
18 Feng A H, Xiao B L, Ma Z Y. Composites Science & Technology, 2008, 68(9), 2141.
19 Feng T, Yu Z Q, Han Y, et al. Journal of Aeronautical Materials, 2013, 33(4), 27(in Chinese).
冯涛, 郁振其, 韩洋, 张永昂, 等. 航空材料学报, 2013, 33(4), 27.
20 Uzun H. Materials & Design, 2007, 28(5), 1440.
21 Marzoli L M, Strombeck A V, Santos J F D. Composites Science & Technology, 2006, 66(2), 363.
22 Wang D, Xiao B L, Wang Q Z, et al. Journal of Materials Science & Technology, 2014, 30(1), 54.
23 Periyasamy P, Mohan B, Balasubramanian V. Journal of Materials Engineering & Performance, 2012, 21(11), 2417.
24 Kumar N. Materials & Design, 2013, 51, 998.
25 Li J Y, Zhao Y, Chen H B. Journal of Materials Engineering, 2005(1), 29(in Chinese).
李敬勇, 赵勇, 陈华斌. 材料工程, 2005(1), 29.
26 Chen H B, Yan J, Li J Y, Jiang C Y, et al. Journal of East China Shipbuilding Institute (Natural Science Edition), 2004(3), 62(in Chinese).
陈华斌, 严铿, 李敬勇, 蒋成禹, 等. 华东船舶工业学院学报(自然科学版), 2004(3), 62.
27 Li J Y, Zhao Y. Development and Application of Materials, 2004(6), 30(in Chinese).
李敬勇, 赵勇. 材料开发与应用, 2004(6), 30.
28 Wang S S, Mao C H, Yang J, et al. Chinese Journal of Rare Metals, 2012, 36(1), 167(in Chinese).
汪山山, 毛昌辉, 杨剑, 等. 稀有金属, 2012, 36(1), 167.
29 Minak G, Ceschini L, Boromei I, et al. International Journal of Fatigue, 2010, 32(1), 218.
30 Liu H, Hu Y, Zhao Y, et al. Materials & Design, 2015, 65, 395.
31 Ceschini L, Boromei I, Minak G, et al. Composites Part A, 2007, 38(4), 1200.
32 Peddavarapu S, Raghuraman S, Bharathi R J, et al. Transactions of the Indian Institute of Metals, 2017, 70(3), 703.
33 Storjohann D, Barabash O M, David S A, et al. Metallurgical and Materials Transactions A, 2005, 36(11), 3237.
34 Mohammadnezhad, Mahyar, Zabolian, et al. Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science, 2015, 46(12), 5747.
35 Salih O S, Ou H, Wei X, et al. Materials Science and Engineering: A, 2019, 742, 78.
36 Bozkurt Y, Uzun H, Salman S. Journal of Composite Materials, 2011, 45(21), 2237.
37 Sun R J. Electric Welding Machine, 2015, 45(3), 81 (in Chinese).
孙汝继.电焊机, 2015, 45(3), 81.
38 Wang D, Wang Q Z, Xiao B L, et al. Acta Metallurgica Sinica, 2014, 50(4), 489 (in Chinese).
王东, 王全兆, 肖伯律, 等. 金属学报, 2014, 50(4), 489.
39 Cioffi F, Fernandez R, Gesto D, et al. Composites Part A Applied Science and Manufacturing, 2013, 54, 117.
40 Yao T T. Study on friction stir welding technology and weld metal migration behavior of particle reinforced aluminum matrix composites. Master's Thesis, Jiangsu University of Science and Technology, China, 2015 (in Chinese).
姚婷婷. 颗粒增强铝基复合材料搅拌摩擦焊工艺及焊缝金属迁移行为研究. 硕士学位论文, 江苏科技大学, 2015.
41 Herbert M A, Shettigar A K, Nigalye A V, et al. In: 2nd International Manufacturing Engineering Conference (iMEC) / 3rd Asia-Pacific Conference on Manufacturing Systems (APCOMS). Kuala Lumpur, Malaysia, 2015, pp. 1014.
42 Kalaiselvan K, Murugan N. Transactions of Nonferrous Metals Society of China (English Edition), 2013, 23(3), 616.
43 Nami H, Adgi H, Sharifitabar M, et al. Materials & Design, 2011, 32(2), 976.
44 Kumar A, Mahapatra M M, Jha P K, et al. Materials & Design, 2014, 59, 406.
45 Cavaliere P, Cerri E, Marzoli L, et al. Applied Composite Materials, 2004, 11(4), 247.
46 Ji P F, Zhang Z, Zhao G H, et al. Aerospace Materials & Technology, 2020, 50(3), 11(in Chinese).
计鹏飞, 张振, 赵光辉, 等. 宇航材料工艺, 2020, 50(3), 11.
47 Yigezu B S, Venkateswarlu D, Mahapatra M M, et al. Materials & Design, 2014, 54(2), 1019.
48 Hassan A M, Qasim T, Ghaithan A. Materials and Manufacturing Processes, 2012, 27(12), 1397.
49 Zhang Y N, Cao X, Larose S, et al. Canadian Metallurgical Quarterly, 2012, 51(3), 250.
50 Han G Y. Study on microstructure and mechanical properties of friction stir welded in-situ TiB2/Al-Si-Mg composite. Master's Thesis, Shanghai Jiao Tong University, China, 2018 (in Chinese).
韩高阳. 原位自生TiB2/Al-Si-Mg复合材料搅拌摩擦焊接的微观组织与力学性能研究. 硕士学位论文, 上海交通大学, 2018.
51 Zhao X Q, Xu X H, Hua P, et al. Journal of Netshape Forming Engineering, 2015, 7(4), 53(in Chinese).
赵小强, 许新猴, 华鹏, 等. 精密成形工程, 2015, 7(4), 53.
52 Feng T. Research on the welding of SiCp/2024Al aluminum metal matrix composite. Ph.D Thesis. Shanghai Jiao Tong University, China, 2007 (in Chinese).
冯涛. SiCp/2024Al铝基复合材料的焊接. 博士学位论文, 上海交通大学, 2007.
53 Dinaharan I, Murugan N, Parameswaran S. Transactions of the Indian Institute of Metals, 2012, 65(2), 159.
54 Ceschini L, Boromei I, Minak G, et al. Composites Science & Technology, 2007, 67(3-4), 605.
55 Ni D R, Chen D L, Xiao B L, et al. International Journal of Fatigue, 2013, 55, 64.
56 Wang D, Xiao B L, Wang Q Z, et al. Materials & Design, 2013, 47, 243.
57 Prater T, Strauss A, Cook G, et al. Journal of Materials Engineering and Performance, 2013, 22(6), 1807.
58 Adesina A Y, Al-Badour F A, Gasem Z M. Journal of Manufacturing Processes, 2018, 33, 111.
59 Shindo D J, Rivera A R, Murr L E. Journal of Materials Science, 2002, 37(23), 4999.
60 Prado R A, Murr L E, Shindo D J, et al. Scripta Materialia, 2001, 45(1), 75.
61 Fernandez G J, Murr L E. Materials Characterization, 2004, 52(1), 65.
62 Prater T J, Strauss A M, Cook G E, et al. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2013, 44(8), 3757.
63 Prado R A, Murr L E, Soto K F, et al. Materials Science & Engineering A, 2003, 349(1-2), 156.
64 Fernandez R, Ibanez J, Cioffi F, et al. Science and Technology of Welding and Joining, 2017, 22(6), 526.