镍基石墨烯复合材料的研究进展

doi:10.11896/cldb.21040029

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4207KB)
Export: BibTeX | EndNote (RIS)

Abstract The mechanical properties of nickel matrix composites can be significantly improved by the traditional particle reinforcements, but it is often accompanied by the decrease of thermal conductivity and electrical conductivity. The unique two-dimensional structure of graphene makes it exhibit extremely high strength and stiffness, good chemical stability, excellent electrical and thermal conductivity. Due to its inception, graphene has become an ideal particle reinforcement, and has been widely used in the fields of metal matrix composites, ceramic matrix composites and polymer matrix composites. Therefore, the addition of graphene can effectively improve the comprehensive properties of Ni-based composites.
Graphene has some disadvantages, such as low density, easy agglomeration and poor wettability with nickel matrix. Therefore, the preparation process and stability of graphene, its dispersion in nickel matrix and the interfacial bonding strength still restrict the high performance of nickel matrix composites. How to improve the existing preparation process and continuously develop new processes is still the research focus. At present, the main preparation methods of graphene reinforced Ni-based composites are electrodeposition, powder metallurgy, molecular-level mixing, chemical vapor deposition and so on. With the improvement of the preparation process, the dispersion of graphene and the wettability are improved, thereby comprehensively improving the structural and functional properties of the composites, which is conducive to its wide application in electronic devices, aerospace, mechanical and chemical fields.
In this paper, the research progress of the preparation technology of nicke/graphene composites was systematically reviewed, and the characteristics of various preparation technologies were analyzed and compared. The effects and internal mechanisms of graphene on the hardness, elastic modulus, tensile properties, friction and wear resistance, corrosion resistance, thermal conductivity and electrical conductivity of the composites were mainly introduced. At the same time, combined with the potential application and development trend of nickel/graphene composites, the challenges faced by researchers in future research are proposed.

Key words： graphene Ni-based composite mechanical property corrosion resistance thermal and electrical conductivity

Published: 28 December 2022 Online: 2023-01-03

CLC number:

TB331

Fund:National Natural Science Foundation of China (51671050), China Postdoctoral Science Foundation (2020M680977), the Key R & D Projects of Liaoning Province (2020JH2/10100011), and the Doctoral Startup Foundation of Liaoning Province(2019-BS-169).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TAN Haifeng
	HOU Mengqing
	WU Chen
	HE Chunlin
	ZHANG Bin

Cite this article:

TAN Haifeng,HOU Mengqing,WU Chen, et al. Research Progress of Nickel/Graphene Composites[J]. Materials Reports, 2022, 36(24): 21040029-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21040029 OR http://www.mater-rep.com/EN/Y2022/V36/I24/21040029

1 Jyotheender K S, Srivastava C. Composites Part B: Engineering, 2019, 175, 107145.
2 Zhang Q, Ren Y H, Li J, et al. Corrosion Science and Protection Technology, 2017, 29(1), 21 (in Chinese).
张倩, 任彦虹, 李娟, 等. 腐蚀科学与防护技术, 2017, 29(1), 21.
3 Liu Y, Zheng F, Wu Y, et al. Journal of Alloys and Compounds, 2020, 826, 154080.
4 Ma S B, Xia Z W, Xu Y, et al. Journal of Materials Engineering, 2017, 45(6), 24 (in Chinese).
马世榜, 夏振伟, 徐杨, 等. 材料工程, 2017, 45(6), 24.
5 Liu Y, Liu Y, Zhang Q, et al. Materials Science and Engineering A, 2018, 727, 133.
6 Zhao Q, Liu Y, Abel E W. Applied Surface Science, 2005, 240(1), 441.
7 Xu J, Tao J, Jiang S, et al. Applied Surface Science, 2007, 254(13), 4036.
8 Zhou S, Zeng X, Hu Q, et al. Applied Surface Science, 2008, 255(5, Part 1), 1646.
9 Wu H, Chen T, Wang Q H. Journal of Materials Engineering, 2011(12), 48 (in Chinese).
吴化, 陈涛, 王庆辉. 材料工程, 2011(12), 48.
10 Zhang Q H, Shen X X, Cheng D H, et al. Plating & Finishing, 2016, 38(12), 1(in Chinese).
张庆辉, 沈喜训, 成旦红, 等. 电镀与精饰, 2016, 38(12), 1.
11 Zhang X, Zeng Y, Liang J, et al. Ceramics International, 2020, 46(9), 13144.
12 Liang Z P, Wang Y Y, Jin H, et al. Journal of Materials Engineering, 2018, 46(5), 112 (in Chinese).
梁智鹏, 王一雍, 金辉, 等. 材料工程, 2018, 46(5), 112.
13 Reinert L, Zeiger M, Suarez S, et al. RSC Advances, 2015, 5, 95149.
14 Mai Y J, Chen F X, Lian W Q, et al. Journal of Alloys and Compounds, 2018, 756, 1.
15 Vlassiouk I, Smirnov S, Ivanov I, et al. Nanotechnology, 2011, 22, 275716.
16 Kumar D R, Singh R, Dubey P, et al. Journal of Nanoparticle Research, 2013, 15, 1847.
17 Akinwande D, Brennan C J, Bunch J S, et al. Extreme Mechanics Letters, 2017, 13, 42.
18 Zhao C. Applied Physics A, 2014, 118(2), 409.
19 Lin S, Shi Y T, Wang Y Y, et al. Materials Reports B:Research Papers, 2019, 33(6), 1945 (in Chinese).
林珊, 史永堂, 王盈盈, 等. 材料导报:研究篇, 2019, 33(6), 1945.
20 Su P, Guo H L, Peng S, et al. Acta Physico-Chimica Sinica, 2012, 28(11), 2745 (in Chinese).
苏鹏, 郭慧林, 彭三, 等. 物理化学学报, 2012, 28(11), 2745.
21 Pei F Y, Xu S G, Liu Y L, et al. CIESC Jorunal, 2013, 64(8), 3062 (in Chinese).
裴福云, 徐慎刚, 刘应良, 等. 化工学报, 2013, 64(8), 3062.
22 Lee D, Song S H, Hwang J, et al. Small, 2013, 9(15), 2602.
23 Song S H, Park K H, Kim B H, et al. Advanced Materials, 2013, 25(5), 732.
24 Fan W, Zhang C, Tjiu W W, et al. Journal of Materials Research, 2013, 28(4), 611.
25 Chu K, Jia C. Physica Status Solidi (a), 2014, 211(1), 184.
26 Hong Q H, Yan S J, Yang C, et al. Journal of Materials Engineering, 2016, 44(9), 1 (in Chinese).
洪起虎, 燕绍九, 杨程, 等. 材料工程, 2016, 44(9), 1.
27 Kuang D, Xu L, Liu L, et al. Applied Surface Science, 2013, 273, 484.
28 Ding X L, Hu Z F, Jin G, et al. Journal of Materials Engineering, 2018, 46(11), 110 (in Chinese).
丁小龙, 胡振峰, 金国, 等. 材料工程, 2018, 46(11), 110.
29 Rashad M, Pan F, Tang A, et al. Progress in Natural Science: Mate-rials International, 2014, 24(2), 101.
30 Li J L, Wang X D, Wu Y, et al. Chinese Journal of Rare Metals, 2018, 42(3), 252 (in Chinese).
李炯利, 王旭东, 武岳, 等. 稀有金属, 2018, 42(3), 252.
31 Rashad M, Pan F, Hu H, et al. Materials Science and Engineering: A, 2015, 630, 36.
32 Yuan Q H, Zeng X S, Wu J B, et al. Special Casting & Nonferrous Alloys, 2016, 36(3), 282 (in Chinese).
袁秋红, 曾效舒, 吴俊斌, 等. 特种铸造及有色合金, 2016, 36(3), 282.
33 Borkar T, Mohseni H, Hwang J, et al. Journal of Alloys and Compounds, 2015, 646, 135.
34 Siokou A, Ravani F, Karakalos S, et al. Applied Surface Science, 2011, 257(23), 9785.
35 Li J, An Z, Wang Z, et al. ACS Applied Materials & Interfaces, 2016, 8(6), 3969.
36 Zhang H, Zhang N, Fang F. Ultrasonics Sonochemistry, 2020, 62, 104858.
37 Jiang J, He X, Du J, et al. Materials Letters, 2018, 220, 178.
38 Lei Y, Jiang J, Bi T, et al. RSC Advances, 2018, 8(39), 22113.
39 Fortunato G V, Lima F D, Maia G. Journal of Power Sources, 2016, 302, 247.
40 Saha R K, Khan T I. Surface and Coatings Technology, 2010, 205(3), 890.
41 Yasin G, Khan M A, Arif M, et al. Journal of Alloys and Compounds, 2018, 755, 79.
42 Kuang D. Preparation and properties of graphene/nickel based compo-site. Master's Thesis, Shanghai Jiaotong University, China, 2013 (in Chinese).
匡达. 石墨烯/镍基复合材料的制备和性能研究. 硕士学位论文, 上海交通大学, 2013.
43 Ji C B, Wang X F, Zou J W, et al. Journal of Materials Engineering, 2017, 45(3), 1 (in Chinese).
吉传波, 王晓峰, 邹金文, 等. 材料工程, 2017, 45(3), 1.
44 Hwang J, Yoon T, Jin S H, et al. Advanced Materials, 2013, 25(46), 6724.
45 Cao M, Xiong D B, Tan Z Q, et al. Carbon, 2017, 117, 65.
46 Chen F, Ying J, Wang Y, et al. Carbon, 2016, 96, 836.
47 Ren Z, Meng N, Shehzad K, et al. Nanotechnology, 2015, 26(6), 065706.
48 Kumar C M P, Venkatesha T V, Shabadi R. Materials Research Bulletin, 2013, 48(4), 1477.
49 Xiang L, Shen Q, Zhang Y, et al. Surface and Coatings Technology, 2019, 373, 38.
50 Lei Y, Jiang J, Bi T, et al. Tribology Letters, 2018, 66(4), 129.
51 Lei Y, Du J, Pang X, et al. Materials Research Express, 2018, 5(5), 056512.
52 Jiang K, Li J, Liu J. RSC Advances, 2014, 4(68), 36245.
53 Hu Z F, Ding X L, Jin G, et al. Plating & Finishing, 2017, 36(21), 1117 (in Chinese).
胡振峰, 丁小龙, 金国, 等. 电镀与涂饰, 2017, 36(21), 1117.
54 Ding X L. Study on preparation and performance of electro-brush plating Ni-graphene composite coatings. Master's Thesis, Haerbin Engineering University, China, 2018 (in Chinese).
丁小龙. 电刷镀Ni-石墨烯复合镀层的制备与性能研究. 硕士学位论文, 哈尔滨工程大学, 2018.