多孔金属材料的制备及应用研究进展

doi:10.11896/cldb.20110092

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (18372KB)
Export: BibTeX | EndNote (RIS)

Abstract As a new type of light-weight metallic material, porous metals have the advantages of both structural and functional materials, such as low bulk density, large specific surface area, high specific strength, good energy absorption, strong heat transfer and heat dissipation. Comparing to traditional dense metals, those advantages have made the porous metallic materials attract more attention and expand more applications. This review briefly describes the preparation methods and forming mechanism of several commonly used porous metallic materials, including cas-ting method, sintering method, deposition method, dealloying method and high-energy-beam rapid prototyping method, etc., and expounds the advantages, disadvantages and applicability of various preparation processes. The dealloying method with high preparation efficiency and the high-energy-beam rapid prototyping method with high material utilization, strong adaptability and near-net prototyping are detailed. In addition, the applications of porous metals in structural and functional fields are reviewed, including industrial structure, biomedicine, filtration, catalysis, electrode materials, sound absorption and noise reduction as well as heat exchange. Finally, the existing problems in the preparation of porous metallic materials are pointed out and its future development trend is prospected.

Key words： porous metal material light metal porous structure high-energy-beam rapid prototyping preparation method

Received: 25 September 2202 Published: 25 September 2022 Online: 2022-09-26

CLC number:

TG14

Fund:Jiangxi Provincial Superiority Science and Technology Innovation Team Project (20181BCB24001) and National Natural Science Foundation of China (51805315).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHENG Min
	YANG Jin
	ZHANG Hua

Cite this article:

ZHENG Min,YANG Jin,ZHANG Hua. Review on Preparation and Applications of Porous Metal Materials[J]. Materials Reports, 2022, 36(18): 20110092-16.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20110092 OR http://www.mater-rep.com/EN/Y2022/V36/I18/20110092

1 Liu P S. Introduction to porous materials, Tsinghua University Press, China,2012(in Chinese).
刘培生.多孔材料引论,清华大学出版社,2012.
2 Xi Z P, Tang H P, Sintered metal porous materials, Metallurgical Indu-stry Press, China,2009(in Chinese).
奚正平,汤慧萍. 烧结金属多孔材料, 冶金工业出版社, 2009.
3 Liu P S, Hang L G. Journal of Functional Materials,2002,33(1),5(in Chinese).
刘培生,黄林国. 功能材料, 2002,33(1),5.
4 Liu P S, Chen G F, et al. Porous Materials, 2014, 12,113.
5 Goodall R, Mortensen A. Physical Metallurgy,2014,24,2399.
6 Sosnik A. US Patent,US2434775,1948.
7 Zhang Z Q.Research on sound eliminating performances and energy absorption properties of porous aluminum alloys by laser additive manufacturing. Master's Thesis, Harbin Engineering University, China,2018(in Chinese).
张卓卿.激光增材多孔铝合金的消声吸能性能研究.硕士学位论文,哈尔滨工程大学,2018.
8 Qin J H, Chen Q, Yang C Y,et al. Journal of Alloys and Compounds,2016,645,39.
9 Li X F, Jiang W F, Hao S J, et al. Southern Metals,2016,209(2),11(in Chinese).
李欣芳,蒋武锋,郝素菊,等. 南方金属, 2016,209(2),11.
10 Li F F, Zhang F. China Foundry Machinery & Technology,2021,56(1),82(in Chinese).
李斐斐, 张芳. 中国铸造装备与技术, 2021,56(1),82.
11 Tian D R, Bo K, Wang Y, et al. Gansu Metallurgy, 2014,36(2),6(in Chinese).
田大容,柏凯,王扬,等. 甘肃冶金, 2014,36(2),6.
12 Xu F M, Wang Q, Xu Q Y, et al. Special Casting & Nonferrous Alloys, 2007,27(7),563(in Chinese).
徐方明,王倩,许庆彦,等. 特种铸造及有色合金, 2007,27(7),563.
13 Khabushan J K, Bonabi S B, Aghbagh F M, et al. Materials and Design,2014,55,792.
14 Cheng H F, Huang X M, Chen G H. Light Alloy Fabrication Technology, 2001,29(1),38(in Chinese).
程和法,黄笑梅,陈国宏. 轻合金加工技术, 2001,29(1),38.
15 Jia G Z, Hou Y, Chen C X, et al. Materials & Design,2017,140,106.
16 Lara R G A, Figueroa I A, Suarez M A, et al. Journal of Materials Processing Technology, 2017, 243, 16.
17 Deng W H, Juan Y, Zhou X Y, et al. Transactions of Nonferrous Metals Society of China,2012,22,85.
18 Banhart J. Progress in Materials Science,2001,46,559.
19 Yamada Y, Shimojima K, Sakaguchi Y, et al. Journal of Materails Science Letters, 1999,18(18),1477.
20 Apprill J M, Poirier D R. Materials Research Society Symposium-Procee-dings, 1998,521(13),291.
21 Yang Q Q, Liu Y, Li Y X. Transaction of Nonferrous Metals Society of China,2020,30(200), 1524.
22 Zhou C X, Liu Y, Zhang H W,et al. Transaction of Nonferrous Metals Society of China ,2014,24,4030.
23 Nakajima H. Proceeding of the Japan Academy,2010,86,884.
24 Cirincione R, Anderson R, Zhou J, et al. In: Proceeding of the 2002 TMS Meeting in Seattle. Washington,2002,pp.137.
25 Huang B S, Peng H, Chen Q, et al. Materials Science and Technology, 2017,25(5),32(in Chinese).
黄本生,彭昊,陈权,等. 材料科学与工艺, 2017,25(5),32.
26 Jaroslav Capek, Dalibor Vojtech. Material Science and Engineering C,2014,43, 494.
27 Niu W J. Research on preparation and properties of porous titanium and its alloys. Ph.D. Thesis,Chongqing University,China,2010(in Chinese).
牛文娟.多孔钛及其合金的制备及性能研究.博士学位论文,重庆大学,2010.
28 Zuo X Q, Sun J L. Journal of Kunming University of Science and Techno-logy, 2005,30(1),13(in Chinese).
左孝青,孙加林. 昆明理工大学学报, 2005,30(1),13.
29 Lu Z L, Xu W L, Cao J W, et al. Transaction of Nonferrous Metals Society of China,2020,30,382.
30 Dudia D V,Bokhonov B B,Olevsky A O. Materials,2019,28,1.
31 Feng W, Zhu X D, Kong Q Q, et al. Aerospace Materials & Technology, 2015,45(3),55(in Chinese).
冯威,朱晓东,孔清泉,等. 宇航材料工艺, 2015,45(3),55.
32 Chakravarty D,Ramesh H,Rao T N. Journal of the European Ceramic Society,2009,29(8),1361
33 Li M. Rare Metal Materials and Engineering, 2010,39(10),169(in Chinese).
李梦. 稀有金属材料与工程, 2010,39(10),169.
34 Chen B X. Study on the correlation between microstructure and properties of porous copper fiber sintered. Master's Thesis, Zhejiang University of Technology,China,2017(in Chinese).
陈斌星.铜纤维烧结毡微观结构与性能表征研究.硕士学位论文,浙江工业大学,2017.
35 Li J R, Yu C L Xu Z J, et al. Internation Journal of Hydrogen Energy,2019,44(43),23983.
36 Zhou W. Manufacturing process of porous metal fiber sintered felt and its application mechanism in microreactor for hydrogen production. Master's Thesis, South China University of Technology, China,2010(in Chinese).
周伟.多孔金属纤维烧结板制造及在制氢微反应器中的作用机理.硕士学位论文,华南理工大学,2010.
37 Zhou B,Yuan W, Tang Y,et al. Transactions of Nonferrous Metals Society of China, 2015,25, 2003.
38 Pan M Q, Peng H F, Wu Q Y. Transactions of Nonferrous Metals Society of China,2015,25(4), 1215.
39 Khor K A, Yu L G, Andersen O,et al. Materials Science and Enginee-ring, 2003, A356,130.
40 John Banhart. Progress in Materials Science,2001,46,559.
41 Jumate N, Vida-Simiti I, Thalmaier G, et al. ResearchGate, 2010,4,173.
42 Xu Y L,Menon A S, Hermes D C, et al. Energy Storage Materials,2018,12,69.
43 Kostevsek N, Kristina Z R, Darja P, et al. Electrochim Acta,2014,125,320.
44 Tan K, Tian M B,Cai Q. Thin Solid Films,2010,518,5159.
45 Cao F, Zhang W Y, Zhang S S, et al. Materials Reports A: Review Papers,2017,31(6),139(in Chinese).
曹凤,张文彦,张思思,等. 材料导报:综述篇, 2017,31(6),139.
46 Gao M Y, Yang C, Zhang Q B, et al. Electrochim Acta,2016,215,609.
47 Xiao A G, Zhou S B, Zou C G, et al. Materials Research Bulletin,2014,60,864.
48 Tong J H, Su C, Kuraoka K, et al. Journal of Membrane Science, 2006,269,101.
49 Cai H Z, Yi J H, Wu F, et al. Chinese Journal of Rare Metals,2019(3),120(in Chinese).
蔡宏中,易健宏,吴霏,等. 稀有金属, 2019(3),120.
50 Li Y W, Zhang M, Wang X J, et al. Journal of Aeronautical Materials, 2018,38(5),10(in Chinese).
李元伟,张猛,王小健,等. 航空材料学报, 2018,38(5),109..
51 Luhrs L, Weissmuller J. Scripta Materialia,2018,155,119.
52 Ding Y, Erlebacher J. Journal of the American Chemical Society, 2003,125(26),7772.
53 Huang J F, Sun I W. Advanced Functional Materials, 2005,15(6),989.
54 Zhang Z, Wang Y, Qi Z, et al. The Journal of Physical Chemistry C, 2009,113(29),12629.
55 Fritz J D. Journal of the Electrochemical Society, 1991,138(11),3209.
56 Renner F U, Gründera Y, Lymanb F P, et al. Physical Review B,2008,77(23),235433.
57 Qi Z, Zhang Z, Jia H, et al. Journal of Alloys and Compounds, 2009,472(1-2),71.
58 Jin H J, Kramer D, Ivanisenko Y, et al. Advanced Engineering Mate-rials, 2007,9(10),849.
60 Hakamada M, Nakano H, Furukawa T, et al. The Journal of Physical Chemistry C, 2009,114(2),868.
61 Bayoumi F M, Ateya B G. Electrochemistry Communications, 2006,8(1),38.
62 Fang X M, Lian L X, Gao X, et al. Materials China,2018,7(11),928(in Chinese).
方秀梅,连利仙,高希,等. 中国材料进展, 2018,7(11),928.
63 Zhang Z, Wang Y, Qi Z, et al. Journal of Physical Chemistry C, 2009, 113(29), 12629.
64 Ding Y, Kim Y J, Erlrbacher J. Advanced Materials, 2004, 16(21), 1897.
65 Zhang Z H, Wang Y, Qi Z, et al. Journal of Physical Chemistry C, 2009, 113(4), 1308.
66 Luo J Y,Han P P,Dan Z H,et al. Microporous and Mesoporous Materials, 2020,308,110532.
67 Vega A A,Newman R C. Journal of the Electrochemical Society,2014,161(1),1.
68 Kertis F, Snyder J, Govada L, et al. JOM, 2010,62(6),50.
69 Zheng J B. Study on proparation and electrocatalytic performance of Fe-Pd-P nanoporous alloys.Master's Thesis, University of Science and Technology Liaoning, China, 2018(in Chinese).
郑继波. Fe-Pd-P纳米多孔材料制备及其催化性能研究.硕士学位论文,辽宁科技大学,2018.
70 Luo X, Li R, Huang L, et al. Corrosion Science,2013,67,100.
71 Zhang Z C, Liu S F, Yang X, et al. Hot Working Technology,2019,48(12),1(in Chinese).
张智昶,刘世锋,杨鑫,等. 热加工工艺, 2019,48(12),1.
72 Li Y, Jahr H, Pavanram P, et al. Acta Biomaterialia,2019,96,646.
73 Biemod J E, Hannink G, Verdonschot. Journal of Materials Science-materials in Medicine, 2013,24,745.
74 Furumoto T, Koizumi A,Alkahari M R, et al. Journal of Materials Processing Technology, 2015, 219,10.
75 Dang X A, Zhang Z. Journal Shanxi University of Science & Technology, 2007,25(3),28(in Chinese).
党新安,张政. 陕西科技大学学报, 2007,25(3),28.
76 Shen Y F, Wu P, Gu D D. Acta Aeronautica et Astronautica Sinica,2007,28(5),1236(in Chinese).
沈以赴,吴鹏,顾冬冬. 航空学报, 2007,28(5),1236.
77 Yu X P, Shen Y F, Gu D D. Rare Metau and Cemented Carbides,2009,37(4),11(in Chinese).
于秀平,沈以赴,顾冬冬. 稀有金属与硬质合金, 2009,37(4),11.
78 Qian D Y, Chen C J, Zhang M. Chinese Journal of Lasers, 2016,43(4),1(in Chinese).
钱德宇,陈长军,张敏. 中国激光, 2016,43(4),1.
79 Wauthle R, Ahmadi S M, Yavar S A. et al. Materials Science and Engineering C,2015(54),94.
80 Dadbakhsh S, Speirs M, Kruth J P, et al. CIRP Annals Manufacturing Technology, 2015,64,209.
81 Yuan L, Ding S, Wen C, et al. Bioactive Materials, 2019, 4,56.
82 Li X, Wang C T, Zhang W G. Materials Letters,2009,63(4),403.
83 Parthasarathy J, Starly B, Raman S, et al. Journal of the Machanical Behavior of Biomedical Materials,2010,3,249.
85 Yan R, Luo D M, Huang H, et al. Scientific Reports,2018,8(1),1.
86 Li G C,Wang L,Sang H X. Orthopedic Journal of China,2009,17(24),1883(in Chinese).
李国臣,王林,桑宏勋. 中国矫形外科杂质, 2009,17(24),1883.
87 Murr L E,Gaytan S M,Medina F M,et al. Philosophical Transactions of the Royal Society A, 2010, 368,1999.
88 Deng J F. Modern Manufacturing Technology and Equipment, 2020(8),137(in Chinese).
邓剑峰. 工艺与装备, 2020(8),137.
89 Zhao H C, Zhu Y C, Tian J, et al. Nonferrous Metals Processing, 2018,47(6),1(in Chinese).
赵河闯,朱艳超,田键,等. 有色金属加工, 2018,47(6),1.
90 Banhart J. Progress in Materials Science,2001,46,559.
91 Guo Q F. Study on The preparation and properties of magnesium alloy foam. Master's Thesis, Xi'an University of Technology, China, 2010(in Chinese).
郭权芬.泡沫镁合金的制备及其性能研究.硕士学位论文,西安理工大学,2018.
92 You Z X, Wang C H. Hot Working Technology,2020,49(20),24(in Chinese).
尤子旭,王春华.2020,49(20),24.
93 Ren Y J, Liu S F, Li X J, et al. Materials China,2019,38(8),800(in Chinese).
任垚嘉,刘世锋,李香君,等. 中国材料进展, 2019,38(8),800.
94 Li W J. Preparation and study on properties of medically degradable porous zinc-magnesium alloy. Master's Thesis, Taiyuan University of Technology, China, 2019(in Chinese).
李伟健.医用可降解多孔锌镁合金的制备及性能研究.硕士学位论文,太原理工大学,2019.
95 Murr L E. Journal of Materials Research and Technology,2020,9(1),1087.
96 Lai M, Gao Y,Yuan B,et al. Journal of Materials Engineering & Performance,2015,24(24),136.
97 Liu L T, Niu G Q, Zhou Q K, et al. Journal of Bengbu Medical College, 2019,44(9),1153(in Chinese).
刘路坦,牛国旗,周乾坤,等. 蚌埠医学院学报, 2019,44(9),1153.
98 Biemond J E, Hannink G, Verdonschot N, et al. Journal of Materials Science Materials in Medicine,2013,24(3),745.
99 Zhang W Y, Xi Z P, Fang M, et al. Rare Metal Materials and Enginee-ring,2008,37(7),1129(in Chinese).
张文彦,奚正平,方明,等. 稀有金属材料与工程, 2008,37(7),1129.
100 Chen W, Guan C, Liang Z P, et al. Hot Working Technology, 2019,48(16),22(in Chinese).
陈旺,关创,梁智萍,等. 热加工工艺, 2019,48(16),22.
101 Seok J M, Chun K M, Song S, et al. Journal of Aerosol Science,2015,81,47.
102 Liu W H, Liang Y R. China Metal Bulletin, 2019(11),179(in Chinese).
刘文海,梁永仁. 中国金属通报, 2019(11),179.
103 Yuan X X. Synthesis of porous metal oxides nanomaterials with application in catalysis and gas sensing. Master's Thesis, Shandong Normal University, China, 2020(in Chinese).
袁萧萧.多孔金属氧化物纳米材料的制备及其在气敏与催化方面的应用研究.硕士学位论文,山东师范大学,2020.
104 Duan H, Hao Q, Xu C. Journal of Power Sources,2015,280,482.
105 Zheng J B, Li X, Lu G H, et al. Materials Reports B: Research Papers,2018,32(8),2828(in Chinese).
郑继波,李雪,卢公昊,等. 材料导报:研究篇, 2018,32(8),2828.
106 Yang C L,Xiang H, Yang S C,et al. Rare Metal Materials and Engineering,2014,43(S1),230(in Chinese).
杨春雷,项桦,杨圣晨,等. 稀有金属材料与工程, 2014,43(S1),230.
107 Zhou W W, Wang H, Zhao R, et al. Journal of Solid State Chemistry,2019,277,100.
108 Jin W, Maduraiveeran G. Materials Today Energy,2019,13,64.
109 Kong D S, Wang J M, Pi O Y. Acta Physico-Chimica Sinica,2011,27(4),764(in Chinese).
孔德帅,王建明,皮欧阳. 物理化学学报, 2011,27(4),764.
110 Zhang L, Zhu D, Song M. Rare Metal Materials and Engineering,2014,43(10),2507(in Chinese).
张蕾,朱丁,宋明. 稀有金属材料与工程, 2014,43(10),2507.
111 Garcia E M, Taroco H A, Matencio T, et al. Electrocatalysis,2013,4(2),71.
112 Chen P C, Hsieh S J, Zou J, et al. Mater Letter,2014,133(133),175.
113 Li Z F. Highway,2020 (8),288(in Chinese).
李占甫.公路,2020(8),288.
114 Liu P S, Qing H B,Hou H L. Materials & Design, 2015,85,275.
115 Lu M, Meng B N, Liu P S,et al. Rare Metal Materials and Engineering, 2015,44(12),3083(in Chinese).
卢淼,孟泊宁,刘培生,等. 稀有金属材料与工程, 2015,44(12),3083.
116 Ao Q B, Wang J Z, Li A J, et al. Rare Metal Materials and Enginee-ring,2017,46(2),287(in Chinese).
敖庆波,王建忠,李爱君,等. 稀有金属材料与工程, 2017,46(2),287.
117 Francisco G M. Materials,2016,9(85),1.
118 Bhattacharya A, Calmidi V V, Mahajan R L. International Journal of Heat & Mass Transfer,2002,45(5),1017.
119 Ejlali A, Hooman K, Gurgenci H. International Communications Heat Mass Transfer, 2009,36(7),674.