气凝胶型轻木基复合材料的研究进展

doi:10.11896/cldb.21010182

Abstract
Figure/Table
References
Related Citation (5)

Download:

Full Text ( PDF ) (12129KB)
Export: BibTeX | EndNote (RIS)

Abstract Balsa wood(Ochroma pyramidale), as a kind of natural biomass raw material, is low cost, naturally abundant, renewable and biodegradable, and it also has lots of advantages, including low density, light quality, high porosity and thin cell walls. In addition, it also has a porous hierarchical physical structure, good dimensional stability and easy processing. In recent years, researchers have found that a sponge-like material with large specific surface area, high porosity, excellent mechanical properties and adjustable multistage pore structure could be obtained using these advantages, through a simple and effective top-down processing method, such as cell swelling and drying. This structure is very similar to the traditional aerogel and sponges, so it is called aerogel-type balsa wood, also known as wood sponge (WS). Moreover, through a series of subsequent functionalization, it could be endowed with a variety of new functions, and then be used to prepare biodegradable aerogel-type composite materials. At the same time, this material could overcome some defects of traditional aerogels, such as poor mechanical properties, complicated production process, high energy consumption and non-environmental regeneration, making them ideally suited for the research of various functional materials. In this review, we highlight the micro/nanostructures of balsa wood and aerogel-type balsa, briefly introduce the characteristics of bio-based aerogel-type balsa wood-based composite materials, and summarize the preparation methods. The latest advances in oil/water separation, transparent materials, energy storage materials and other fields are also described. Furthermore, the scientific and technical challenges and future research opportunities are finally discussed, providing a theoretical reference for the high value-added utilization of aerogel-type balsa wood.

Key words： natural balsa wood wood sponge aerogel-type composite material top-down functionalization modification

Published: 10 August 2022 Online: 2022-08-15

CLC number:

TB34

Fund:Special Funds for Scientific Research of Forestry Public Welfare Industry(201504610).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Ying
	HUANG Yanhui
	LIU Xianmiao

Cite this article:

LIU Ying,HUANG Yanhui,LIU Xianmiao. Research Progress of Aerogel-type Balsa Wood-based Composites[J]. Materials Reports, 2022, 36(15): 21010182-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21010182 OR http://www.mater-rep.com/EN/Y2022/V36/I15/21010182

1 Myung Y, Jung S, Tung T T, et al. ACS Sustainable Chemistry & Engineering, 2019, 7(4), 3772.
2 Yao W, Mao R, Gao W, et al. Carbon, 2020, 158, 418.
3 Gu H, Zhou X, Lyu S, et al. Journal of Colloid and Interface Science, 2020, 560, 849.
4 Dou L, Zhang X, Cheng X, et al. ACS Applied Materials & Interfaces, 2019, 11(32), 29056.
5 Zhang X, Liu M, Wang H, et al. Carbohydrate Polymers, 2019, 208, 232.
6 Zhai X L, Li J, Liu Y X, et al. Journal of Northeast Forestry University, 2008, 36(11), 5(in Chinese).
翟相林,李坚,刘一星,等.东北林业大学学报, 2008, 36(11), 5.
7 Borrega M, Ahvenainen P, Serimaa R, et al. Wood Science and Technology, 2015, 49(2), 403.
8 Gao J R, Qiu J, Li J, et al. Journal of Northeast Forestry University, 2008, 36(11), 98(in Chinese).
高景然,邱坚,李坚,等. 东北林业大学学报, 2008, 36(11), 98.
9 Chen G, Li T, Chen C, et al. Advanced Functional Materials, 2019, 29(44), 1902772.
10 Mi R, Li T, Dalgo D, et al. Advanced Functional Materials, 2020, 30(1), 1907511.
11 Fletcher M I. Economic Botany, 1951, 5(2), 107.
12 Jia C, Li Y, Yang Z, et al. Joule, 2017, 1(3), 588.
13 da Silva A, Kyriakides S. International Journal of Solids and Structures, 2007, 44(25-26), 8685.
14 Cave I D. Wood Science and Technology, 1968, 2(4), 268.
15 Cameselle-Molares A, Vassilopoulos A P, Keller T. International Journal of Fatigue, 2019, 125, 72.
16 Zhang J, Shen Y, Jiang B, et al. Aerospace, 2018, 5(3), 75.
17 Mohammadi M S, Nairn J A. Composites Part B: Engineering, 2017, 122, 165.
18 Malek S, Raney J R, Lewis J A, et al. Bioinspiration & Biomimetics, 2017, 12(2), 26014.
19 He T X. Ultrastructure of wood cell wall, China Forestry Publishing House, China, 1987(in Chinese).
何天相. 木材细胞壁超微结构, 中国林业出版社, 1987.
20 Guan H, Cheng Z, Wang X. ACS Nano, 2018, 12(10), 10365.
21 Song J, Chen C, Yang Z, et al. ACS Nano, 2018, 12(1), 140.
22 Chen C, Song J, Zhu S, et al. Chem, 2018, 4(3), 544.
23 Song J, Chen C, Wang C, et al. ACS Applied Materials & Interfaces, 2017, 9(28), 23520.
24 Zhai X L. Preliminary research of preparation method of aerogel-type wood. Master's Thesis, Northeast Forestry University, China, 2009 (in Chinese).
翟相林. 气凝胶型木材制备方法的初步研究. 硕士学位论文, 东北林业大学, 2009.
25 Fengel D, Wegener G. Wood: chemistry, ultrastructure, reactions, Walter de Gruyter, Berlin and New York, 2011.
26 Li X, Tabil L G, Panigrahi S. Journal of Polymers and the Environment, 2007, 15(1), 25.
27 Rout J, Tripathy S S, Nayak S K, et al. Journal of Applied Polymer Science, 2001, 79(7), 1169.
28 Jia C, Chen C, Kuang Y, et al. Advanced Materials, 2018, 30(30), 1801347.
29 Paris O, Burgert I, Fratzl P. MRS Bulletin, 2010, 35(3), 219.
30 Jia C, Chen C, Kuang Y, et al. Advanced Materials, 2018, 30(30), 1801347.
31 Gao J R, Qiu J, Li J, et al. Journal of Northeast Forestry University, 2008, 36(12), 19(in Chinese).
高景然,邱坚,李坚,等.东北林业大学学报, 2008, 36(12), 19.
32 Le Moigne N, Navard P. Cellulose, 2010, 17(1), 31.
33 Roman M, Winter W T. Biomacromolecules, 2004, 5(5), 1671.
34 Wang M, Liu F, Chen Y, et al. Materials, 2018, 11(12), 2430.
35 Liu S, Zhang Y, Jiang H, et al. Cellulose Science and Technology, 2017, 25(1), 75(in Chinese).
刘双,张洋,江华,等. 纤维素科学与技术, 2017, 25(1), 75.
36 Liebner F, Haimer E, Wendland M, et al. Macromolecular Bioscience, 2010, 10(4), 349.
37 Li Y, Grishkewich N, Liu L, et al. Chemical Engineering Journal, 2019, 366, 531.
38 Liu H,Geng B, Chen Y, et al. ACS Sustainable Chemistry & Enginee-ring, 2017, 5(1), 49.
39 Fu Y, Li G, Yu H, et al. Applied Surface Science, 2012, 258(7), 2529.
40 Zhang W, Liu N, Cao Y, et al. Advanced Materials Interfaces, 2017, 4(10), 1600029.
41 Si Y, Fu Q, Wang X, et al. ACS Nano, 2015, 9(4), 3791.
42 Yang X, Fei B, Ma J, et al. Carbohydrate Polymers, 2018, 180, 385.
43 Fu Q, Ansari F, Zhou Q, et al. ACS Nano, 2018, 12(3), 2222.
44 Wan C, Jiao Y, Wei S, et al. ACS Applied Materials & Interfaces, 2019, 11(51), 47846.
45 Zhu Z, Fu S, Lucia L A. ACS Sustainable Chemistry & Engineering, 2019, 7(19), 16428.
46 Yu Z, Yao Y, Yao J, et al. Journal of Materials Chemistry A, 2017, 5(13), 6019.
47 Zhu M, Song J, Li T, et al. Advanced Materials, 2016, 28(26), 5181.
48 Mi R, Li T, Dalgo D, et al. Advanced Functional Materials, 2020, 30(1), 1907511.
49 Li Y, Cheng M, Jungstedt E, et al. ACS Sustainable Chemistry & Engineering, 2019, 7(6), 6061.
50 Chen M, Zhou W, Chen J, et al. Materials, 2019, 12(19), 3198.
51 Sun H, Bi H, Lin X, et al. Polymers, 2020, 12(1), 165.
52 Song S, Zhao T, Qiu F, et al. Energy, 2019, 172, 1144.
53 Yang H, Chao W, Di X, et al. Energy Conversion and Management, 2019, 200, 112029.
54 Wang M, Liu F, Chen Y, et al. Materials, 2018, 11(12), 2430.
55 Fu Q, Medina L, Li Y, et al. ACS Applied Materials & Interfaces, 2017, 9(41), 36154.
56 Tom L, Rebecca S, Marieluise L, et al. International Journal of Applied Ceramic Technology, 2020, 17(1), 3.