Materials Reports 2022, Vol. 36 Issue (Z1): 22030019-6 |
POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Research on Power Clamp Detection Technology Based on Phased Array Ultrasound |
YU Chao1, JI Changguo1, ZHANG Pengkun1, WANG Kai2, WANG Jing3, LIU Chang3
|
1 North China Electric Power Research Institute Co., Ltd., Beijing 100045, China 2 State Grid Shandong Electric Power Company, Jinan 250000, China 3 Beijing Huake Tonghe Technology Co., Ltd., Beijing 100045, China |
|
|
Abstract The crimping quality of the power cable clamp was tested by using phased array ultrasonic testing(PAUT). In this work, CIVA software is used to carry out phased array ultrasonic simulation research on power clip samples with different crimping quality. The simulation results show that as the indentation depth decreases, the width of the reflecting surface increases, the spacing decreases, and the reflected signal increases gradually. If a wire is not pressed in, the reflection amplitude of the leakage pressure is equivalent to the sound pressure of the large flat bottom echo in the regular reflector, and the echo law of the undervoltage defect is similar to the echo sound pressure law of the long transverse hole in the regular reflector. In addition, the phased array ultrasonic typical patterns of normal wire clips and defective wire clips were obtained through the PAUT experiment, indicating that the PAUT can intuitively detect the leakage pressure and undervoltage of the wire clips. The anatomical cross-sectional structure of the wire clip is consistent with the signal characteristics of the simulation and phased array detection map, which further verifies the validity and accuracy of the phased array detection of crimping quality, and provides a certain reference value for its large-scale engineering applications.
|
Published: 05 June 2022
Online: 2022-06-08
|
|
Fund:Self-Funded Technology Project of North China Electric Power Research Institute Co., Ltd.(KJZ2020076). |
|
|
1 周正思, 李阳林, 饶斌斌, 等. 江西电力, 2018, 42(12), 33. 2 刘纯, 陈红冬, 欧阳克俭, 等.中国电力, 2015, 48(10), 97. 3 王炜, 袁奇, 顾俊杰, 等. 上海交通大学学报, 2018, 52(10), 1189. 4 李衍. 无损探伤, 2015, 39(5), 1. 5 靳世久, 杨晓霞, 陈世利. 电子测量与仪器学报, 2014, 28(9), 925. 6 谢利明, 张艳飞, 张涛, 等. 内蒙古电力技术, 2020, 38(2), 49. 7 严宇, 张晓峰, 杨会敏, 等. 无损检测, 2018, 40(2), 24. 8 季昌国, 余超.材料导报, 2019, 33(Z2), 441. 9 黄军, 黄均亮, 魏运强, 等. 无损检测, 2020, 42(6), 28. 10 Nardo M R, Cerniglia D, Lombardo P, et al. Procedia Structural Integrity, 2016, 2, 581. 11 陈海燕, 李亮, 夏正武, 等. 高电压技术, 2019, 45(4), 1274. 12 陈冰川, 陆文杰, 汪明辉. 无损检测, 2016, 38(6), 41. 13 乔亚霞, 罗宏建, 张鹏飞, 等.中国电力, 2018, 51(12), 95. 14 王锐, 刘志宏, 吴杰峰, 等. 焊接学报, 2019, 40(11), 33. 15 Gengembre N, Lhemery A. Ultrasonics, 2000, 38(1-8), 495. 16 边城亮. 基于背散射信号递归分析的挤压棒材超声无损检测技术研究.硕士学位论文,浙江大学, 2020. 17 张超才, 韩军, 龙晋桓, 等. 中国测试, 2021, 47(7), 19. 18 Darmon M, Leymarie N, Chatillon S, et al. Springer in physics, Springer Proceedings in Physics, 2009, pp. 450. 19 郑晖, 林树青. 超声检测,中国劳动社会保障出版社, 2008, pp.74. 20 GB/T 1179-2008《圆线同心绞架空导线》.中国标准出版社,2008. 21 董吉谔. 电力金具手册,中国电力出版社, 2014, pp.160. |
|
|
|