微生物矿化改性蒙脱土补强天然橡胶的效果

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5712KB)
Export: BibTeX | EndNote (RIS)

Abstract The hydrophilic montmorillonite in the lipophilic rubber matrix tends to aggregate and cannot achieve an ideal reinforcement effect. Using Traditional physical or chemical methods to modify the surface of montmorillonite can cause many problems such as environmental pollution, huge energy or time consuming. In this work, a novel microbial montmorillonite was prepared through both the microbial corrosion and mineralization. The microbial montmorillonite with exfoliated/intercalated lamellar structures was initially achieved by utilizing biomineralization of sulfate-reducing bacteria and then applied to the reinforcement of rubber compounds. Compared with the pristine montmorillonite, the microbial montmorillonite had characteristic peaks of amination corrosion of microorganism in FTIR spectra and the decrease of the zeta potential, showing the effect of microbial corrosion; the (001) diffraction peaks in X-ray spectra dropped to 6.15° while new diffraction peaks appeared at 1—3°, indicating that the microbial mineralization generated CaCO₃ crystals which expanded the distance between montmorillonite layers. When the microbial mont-morillonite was added into the natural rubber, the tensile strength of the compound achieved 20.4 MPa, which was almost the same as the rei-nforcement effect of carbon black N774, attributing to the enlarged interlayer space allowing the easy penetration of rubber chains and the surface-attached biofilms acting as the compatibilizer. Similar results were also obtained from microbial corrosion reinforcing the polar neoprene rubber, showing the good application prospects of microbial mineralized montmorillonite as reinforcing fillers in rubber industry.

Key words： montmorillonite microorganism corrosion natural rubber reinforcing rubber

Published: 05 June 2022 Online: 2022-06-08

CLC number:

TQ041+.8

Fund:Hubei Provincial Key Laboratory of Green Materials for Light Industry (201906A07, 202107A05).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MENG Ziyi
	LI Jing
	KUAI Rong
	LEI Qianjie
	FU Xudong
	ZHANG Rong
	HU Shengfei
	LIU Qingting

Cite this article:

MENG Ziyi,LI Jing,KUAI Rong, et al. Effect of Microbial Mineralization Modified Montmorillonite Reinforced Natural Rubber[J]. Materials Reports, 2022, 36(Z1): 21090113-6.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2022/V36/IZ1/21090113

1 Kelly R G. Nature, 1952, 4339, 1130.
2 Bhatti U H, Kazmi W W, Muhammad H A, et al. Green Chemistry, 2020, 22(19), 6328.
3 Xu T, Li K, Wang Y, et al. Materials Chemistry and Physics, 2019, 231, 357.
4 Abdel-Karim A, El-Naggar M E, Radwan E K, et al. Chemical Enginee-ring Journal, 2021, 405, 126964.
5 Bhattacharyya K G, Gupta S S. Advances in Colloid Interface and Interface Science, 2008, 140(2), 114.
6 Bee S L, Abdullah M A A, Bee S T, et al. Progress in Polymer Science, 2018, 85, 57.
7 Ivanoska-Dacikj A, Bogoeva-Gaceva G, Valic＇ S, et al. Applied Clay Science, 2017, 136, 192.
8 刘仁杰, 李三喜, 王松, 等. 材料导报, 2020, 34(Z1), 249.
9 Usha D K S, Ponnamma D, Causin V, et al. Applied Clay Science, 2015, 114, 568.
10 Gao W, Guo J. Composites Science and Technology, 2017, 139, 26.
11 Dufrene Y F. Trends in Microbiology, 2015, 23(6), 376.
12 Wang J, Li G, Yin H, et al. Environmental Research, 2020, 185, 109451.
13 Flemming H C, Wingender J, Szewzyk U, et al. Nature Review Microbio-logy, 2016, 14(9), 563.
14 King R A, Miller J D A. Nature, 1971, 233, 491.
15 Liu Y, Wang J, Peng Z, et al. Materials Letters, 2019, 246, 32.
16 Meng Z, Liu Y, Xiong Y, et al. Micro & Nano Letters, 2021, 16(12), 610.
17 Yang W, Zaoui A. Physica A: Statistical Mechanics and Its Applications, 2016, 464, 191.
18 Hu L, Wang H, Xu P, et al. Water Research, 2021, 190, 116753.
19 Shephard J J, Savory D M, Bremer P J, et al. Langmuir, 2010, 26(11), 8659.
20 Xiao R, Zheng Y. Biotechnology Advances, 2016, 34(7), 1225.
21 Rong X, Zhao G, Fein J B, et al. Journal of Hazard Materials, 2019, 365, 245.
22 Lu C, Chen X. Nano Letters, 2020, 20(3), 1907.
23 Peng K, Wang H, Gao H, et al. Chemical Engineering Journal, 2020, 393, 124704.
24 龙森. Zr/Ti 柱撑蒙脱石的制备及对硝基苯的吸附研究. 硕士学位论文, 贵州大学, 2018.
25 仇付国, 许俊挺, 李林彬, 等. 水处理技术, 2018, 44(4), 36.
26 Neaman M P A, Villieras F. Applied Clay Science, 2003, 22, 153.
27 Zhu S W, Ma Y, Ma L, et al. Journal of Thermal Analysis and Calorimetry, 2012, 109, 301.
28 张增志, 刘建均, 张春卫. 中国材料进展, 2010, 29(4), 49.
29 杨科,王锦成,郑晓昱. 上海工程技术大学学报, 2011, 25(1), 65.
30 Li X, Lv Y, Ma B, et al. Arabian Journal of Chemistry, 2017, 10, S2534.
31 Dragos A, Kovacs A T. Trends Microbiol, 2017, 25(4), 257.
32 Bowen W H, Burne R A, Wu H, et al. Trends Microbiol, 2018, 26(3), 229.
33 Karatan E, Watnick P. Microbiology and Molecular Biology Reviews, 2009, 73(2), 310.
34 Sim M S, Ogata H, Lubitz W, et al. Nature Communication, 2019, 10(1), 44.
35 Nealson K H, Belz A, McKee B. Antonie Van Leeuwenhoek, 2002, 81(1-4), 215.
36 Liu D, Dong H, Bishop M E, et al. Geobiology, 2012, 10(2), 150.
37 Kwon M J, O'Loughlin E J, Boyanov M I, et al. PLOS ONE, 2016, 11(1), e0146689.
38 Badziong W, Ditter B, Thauer R K. Archives of Microbiology, 1979, 123, 301.
39 Wildan M W, Mohd Ishak Z A. International Journal of Polymer Science, 2013, 2013, 1.
40 Shah K J, Shukla A D, Shah D O, et al. Polymer, 2016, 97, 525.
41 Yang S, Liang P, Peng X, et al. Chemical Engineering Journal, 2018, 354, 849.
42 李再峰, 罗明艳, 蒋玉湘, 等. 高分子材料科学与工程, 2017, 33(3), 1.
43 徐云山, 曾召田, 吕海波. 岩土力学, 2019, 40(11), 4324.