METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research on the Effects of Grain Boundary Features on Delaminations of AA2099 Al-Li Alloy Under Fatigue Loading |
QIU Weiyi1,2, ZHU Xianghui1,3 , HUANG Weijiu1,2,3,*, YANG Xusheng2 , WANG Xin1,2
|
1 Faculty of Materials Science and Engineering, Chongqing University of Technology, Chongqing 400054, China 2 Institute of New Materials Technology, Chongqing University of Arts and Sciences, Chongqing 402160, China 3 Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China |
|
|
Abstract The delamination behavior of AA2099 Al-Li alloy under fatigue loading was studied from the perspectives of crystallographic texture and grain boundary features by means of electron backscattered diffraction (EBSD) and back scattered electron (BSE) imaging. The results showed that the delamination of AA2099 Al-Li alloy mostly occured along the high angle grain boundaries. The grains near delamination were mostly in Brass orientation and the delamination fractures were approximately paralleled to the {110} plane of the grains. The tortuosity of grain boundary remarkably affects the delamination behavior. Compared with T81 specimen and T83 specimen, the grain boundaries of solution treatment (ST) specimen were more tortuous. The delamination fractures could hardly be found in ST specimen due to the tortuous grain boundaries. With the increased pre-stretch strain, the morphology of grain boundary precipitates in T83 specimen were quite different from that in T81 specimen. During the cyclic load, the interface decohesion of the coarse grain boundary precipitates in T83 specimen intensified the delamination. Thus, the extents of delamination could be ordered as following: T83 specimen > T81 specimen > ST specimen.
|
Published:
Online: 2022-05-24
|
|
Fund:National Natural Science Foundation of China (51871038) and Technology Innovation and Application Key Projects of Chongqing (cstc2019jscx-mbdxX0025). |
|
|
1 Wang W, Zhang L. Nonferrous Metals Processing, 2019, 48(2), 4 (in Chinese). 王伟, 张蕾.有色金属加工, 2019, 48(2), 4. 2 Yang F Q, Xiong H, Ren B F, et al. World Nonferrous Metals, 2018, 2(22), 1 (in Chinese). 杨富强, 熊慧, 任柏峰, 等.世界有色金属, 2018, 2(22), 1. 3 Yu D M. Aluminum Fabrication, 2018(6), 5 (in Chinese). 余东梅.铝加工, 2018(6), 5. 4 Xu J J, Kang W, Du C B. Ordnance Material Science and Engineering, 2017, 40(3), 133(in Chinese). 徐进军, 康唯, 都昌兵.兵器材料科学与工程, 2017, 40(3), 133. 5 Li H P, Ye L Y, Deng Y L, et al. Materials China, 2016, 35(11), 859(in Chinese). 李红萍, 叶凌英, 邓运来, 等.中国材料进展, 2016, 35(11), 859. 6 Ruschau J J, Jata K V. Scripta Metallurgica et Materialia, 1990,24(8), 1472. 7 Lynch S P, Wanhill R J H, Byrnes R T, et al. Aluminum-lithium Alloys, Elsevier, Commonwealth of Australia, 2014. 8 Kalyanam S, Beaudoin A J, Dodds R H, et al. Engineering Fracture Mechanics, 2009, 3(76), 2175. 9 Messner M C, Beaudoin A J, Dodds R H. International Journal of Fracture, 2014, 188(1), 232. 10 Shen F H, Yi D Q, Jiang Y, et al. Materials Science & Engineering A, 2016, 16(332), 13. 11 Tayon W, Crooks R, Domack M, et al. Experimental Mechanics, 2010, 50(1), 139. 12 Kumai S, Higo Y. Materials Science and Engineering A, 1996, 1(221), 160. 13 Rao K T V, Yu W K, Ritchie R O. Metallurgical Transactions A, 1989, 20(1), 493. 14 El-Aty A A, Xu Y, Guo X Z, et al. Journal of Advanced Research, 2017, 5(301), 19. 15 Roven H J, Starke E A, SDahl Q, et al. Scripta Metallurgica et Materialia, 1990, 24(2), 421. 16 Jiang B, Cao F H, Wang H S, et al. Materials Science & Engineering A, 2019, 740, 160. 17 Li H Y, Huang G S, Kang W, et al. Journal of Materials Science & Technology, 2016, 32(10), 1050. 18 Du C B, Xiong C, Guan R C, et al. Journal of Aeronautical Materials, 2020, 40(5), 33(in Chinese. 都昌兵, 熊纯, 官瑞春, 等.航空材料学报, 2020, 40 (5), 33. 19 Gao C, Yang L A, C Y J, et al. Transactions of Nonferrous Metals Society of China, 2014, 6(24), 2200. 20 Deschamps A, Decreus B, Geuser F D, et al. Acta Materialia, 2013, 2(61), 4012. 21 Rodgers B I, Prangnell P B. Acta Materialia, 2016, 108(8), 56. 22 Nie J F, Muddle B C. Journal of Phase Equilibria, 1998, 19(6), 550. 23 Zhong J. Rare Metal Materials and Engineering, 2014, 43(8), 1948 (in Chinese). 钟警.稀有金属材料与工程, 2014, 43(8), 1948. 24 Wang X M, Li G A, Jiang J T, et al. Materials Science & Engineering A, 2019, 742, 145. 25 Araullo-Peters V, Gault B, Geuser F D, et al. Acta Materialia, 2014, 66 (3), 204. 26 Lin Y, Lu C, Wei C Y, et al. Materials Characterization, 2018, 141, 167. 27 Wang Y X, Ma X W, Xi H K, et al. Journal of Materials Engineering and Performance, 2020, 29(10), 6965. 28 Tian Y, Jiang B, Yi D Q, et al. Corrosion Science and Protection Techno-logy, 2019, 31(2), 228(in Chinese). 田宇, 姜波, 易丹青, 等.腐蚀科学与防护技术, 2019, 31(2), 228. 29 Ott N, Kairy S K, Yan Y M, et al. Metallurgical and Materials Transactions A, Physical Metallurgy and Materials Science, 2016, 48(1), 53. 30 Decreus B, Deschamps A, Donnadieu P, et al. Materials Science & Engineering A, 2013, 586(2),421. 31 Zhong J, Zhong S, Zheng Z, et al. Transactions of Nonferrous Metals Society of China, 2014, 24, 305. |
|
|
|