聚氨酯泡沫浸渍酚醛树脂溶液制备炭泡沫隔热材料研究

doi:10.11896/cldb.21060034

Abstract
Figure/Table
References
Related Citation (6)

Download:

Full Text ( PDF ) (4567KB)
Export: BibTeX | EndNote (RIS)

Abstract Using polyurethane foam as template and thermosetting borated phenolic resin as carbon source, reticulated glass carbon (RVC) foams were prepared by liquid phase impregnation and drying, oxidation stabilization and high temperature pyrolysis processes. The phase composition, pyrolysis and shrinkage process, high temperature heat insulation (1 200 ℃) and compression properties of the material were tested and analyzed. The effects of concentrations of carbon sources on the density, shrinkage and microstructure of RVC foams were studied. The results of the physical and chemical property tests and SEM showed that the diameter distribution of RVC foams were uniform (200—500 μm), and the densities were low (0.041—0.065 g/cm³). The average pore size of the material could be increased by the concentration of impregnation solution. The effective carbon residual rate of RVC foam increased from 32.6% to 49.5%, and the linear shrinkage rate decreased from 20% to 5%. The thermogravimetric process showed that the oxidation stabilization treatment could transform the thermoplastic phenolic resin into thermosetting resin which could stably adhere to the polyurethane preform skeleton during the pyrolysis and carbonization stage, avoiding the stress and macroscopic defects in the final carbon foam structure. The thermal conductivities of RVC materials in the experimental density range were negatively correlated with the density, which could be as low as 0.339 W·(m·K)^-1 at 1 200 ℃, showing good thermal insulation performance. At the same time, the stress-strain curves of the material showed good static compression toughness, which could be used in the field of thermal protection.

Key words： polyurethane foam liquid phase phenolic resin reticulated vitreous carbon foam line shrinkage thermal conductivity at high temperature compression strength

Published: Online: 2022-04-07

CLC number:

TB35

Fund:Advance Research Project(305080501HT01).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHENG Zixuan
	WANG Degang
	LIANG Guojie
	LI Li
	WANG Xinbo
	SU Ruyue
	LI Kai

Cite this article:

ZHENG Zixuan,WANG Degang,LIANG Guojie, et al. Preparation of Carbon Foam Insulation Material from Polyurethane Foam Impregnated with Phenolic Resin Solution[J]. Materials Reports, 2022, 36(7): 21060034-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21060034 OR http://www.mater-rep.com/EN/Y2022/V36/I7/21060034

1 Manocha S M, Patel K, Manocha L M. Indian Journal of Engineering and Materials Sciences, 2010, 17(5),338.
2 Tentorio A, Casolo-Ginelli U. Journal of Applied Electrochemistry, 1978, 8(3), 195.
3 Wang J. Electrochimica Acta, 1981, 26(12), 1721.
4 Friedrich J M, Ponce-De-León C, Reade G W, et al. Journal of Electroanalytical Chemistry, 2004, 561, 203.
5 Harikrishnan G, Umasankar P T, Khakhar D V. Carbon,2007,45(3),531.
6 Wiener M, Reichenauer G, Hemberger F, et al.International Journal of Thermophysics, 2006, 27(6),1826.
7 Farhan S, Wang R M, Jiang H, et al. Journal of Analytical and Applied Pyrolysis, 2014, 110, 229.
8 Liu Shumeng,Li Xiaowen,Zou Huawei,et al. Plastics Science and Technology, 2012, 40(7), 56(in Chinese).
刘书萌, 李晓文, 邹华维, 等. 塑料科技, 2012, 40(7), 56.
9 Song Jiayin,Sun Fuwen,Cai Yibing,et al. New Chemical Materials, 2021, 49(1), 99(in Chinese).
宋佳音, 孙福文, 蔡以兵, 等. 化工新型材料, 2021, 49(1), 99.
10 Zhou Qichao,Yang Hongliang,Ji Nizhi,et al. Aerospace Materials & Technology, 2015, 45(3), 11(in Chinese).
周启超, 杨红亮, 季妮芝, 等. 宇航材料工艺, 2015, 45(3), 11.
11 Wang Jian,Geng Gangqiang,Zhang Lei,et al. Thermosetting Resin, 2015, 30(2), 13(in Chinese).
王健, 耿刚强, 张磊, 等. 热固性树脂, 2015, 30(2), 13.
12 Shulman G P, Lochte H W. Journal of Applied Polymer Science, 1966, 10(4), 619.
13 Alshrah M, Mark L H, Zhao C, et al. Nanoscale, 2018, 10(22),10564.
14 Lu X, Caps R, Fricke J, et al. Journal of Non-Crystalline Solids, 1995, 188(3), 226.
15 Yoldas B E, Annen M J, Bostaph J. Chemistry of Materials, 2000, 12(8), 2475.
16 Hemberger F, Weis S, Reichenauer G, et al. International Journal of Thermophysics, 2009, 30(4), 1357.
17 Yang J, Wu H, Huang G, et al. Materials & Design, 2017, 133, 224.
18 Li W Q, Zhang H B, Xiong X, et al. Materials Science and Engineering: A, 2010, 527(27), 7274.
19 Li S, Song Y, Song Y, et al. Carbon, 2007, 45(10), 2092.
20 Zhou Fanglang,Yang Jing,Yang Haiyan,et al. New Chemical Materials, 2019, 47(11), 149(in Chinese).
周方浪, 杨静, 杨海艳, 等. 化工新型材料, 2019, 47(11), 149.