POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Study on the Design and Sound Absorption Performance of Low-pollution Automotive Polyurethane Foam |
XIONG Kang, YANG Qiliang, HU Li
|
College of Automotive and Transportation Engineering, Wuhan University of Science and Technology, Wuhan 430065, China |
|
|
Abstract Polyurethane foam is one of the most commonly used sound absorbing materials in automobiles. In the existing research, organic solvents are included in the formula of polyurethane foam, which has certain pollution property. Therefore, this work mainly designs low-pollution polyurethane foam materials and studies its sound absorbing performance. The new formulation of low-pollution polyurethane with no organic solvent was adopted, and the formulation was optimized by four factors and three levels orthogonal experiment. The polyurethane foam was synthesized by one-step method, and then LMS Test.Lab and impedance tube equipment were used to test and analyze the sound absorption properties of the materials. The low-pollution polyurethane foam can not only reduce the content of volatile organic compounds in automobile interior, but also show good sound absorption performance. Its average sound absorption coefficient is 0.581, and the peak absorption coefficient is 0.962. The influe-nce of structural parameters of low-pollution polyurethane foam on the sound absorption performance was studied by using the circular pipe theoretical model. When the porosity is 0.7 and the material thickness is less than 65mm, the sound absorption property of the polyurethane foam increases with the increase of the porosity and the thickness of the material; however, the change of flow resistance has little effect on the sound absorption of the material.
|
Published: 10 March 2022
Online: 2022-03-08
|
|
Fund:National Natural Science Foundation of China (51105283). |
|
|
1 Zhang S Q, Rui X L, Zhu P, et al. Science, Technology and Enginee-ring, 2018, 18(31), 142(in Chinese). 张胜强,芮晓丽,朱盼,等. 科学技术与工程,2018,18(31),142. 2 Wang Y H. Research on sound absorption properties and mechanisms of multi-level bionic coupling materials. Ph.D. Thesis, Jilin University, China, 2014(in Chinese). 王永华. 多级仿生耦合材料吸声性能及机理研究. 博士学位论文,吉林大学,2014. 3 Jiang Y. Acoustic performances analysis and application of porous polyurethane composites foams in vehicle. Master's Thesis, Jilin University, China, 2017(in Chinese). 姜洋. 汽车聚氨酯复合多孔材料声学性能分析及其应用. 硕士学位论文,吉林大学,2017. 4 Chen J Y. Study on sound absorption of ultra-low density plant fiber material. Master's Thesis, Fujian Agriculture and Forestry University, China, 2015(in Chinese). 陈捷宇. 超低密度植物纤维材料的吸声特性研究. 硕士学位论文,福建农林大学,2015. 5 Roohalah H, Ali K, Mohammad B. Sound & Vibration,2019,53(4),207. 6 Chen S M. Polymer Composites,2018,39(4), 1370. 7 Lin J. Research on organizations and sound absorption properties of dia-tomite/polyurethane porous composite material. Master's Thesis, Changchun University of Technology, China, 2014(in Chinese). 林健. 硅藻土/聚氨酯多孔复合材料的组织与吸声特性研究. 硕士学位论文,长春工业大学,2014. 8 Hu C B,Zhang X B. Defence Technology, 2019, 15(5), 690. 9 Wang Q Q. New Technology & New Process,2016(11),54(in Chinese). 王启强. 新技术新工艺, 2016(11), 54. 10 Zhao Y. Simulation analysis and optimization of sound absorption properties of porous materials. Master's Thesis, Chongqing University, China, 2018(in Chinese). 赵毅. 多孔材料吸声性能仿真分析与优化. 硕士学位论文,重庆大学,2018. 11 Yang Y, Chu Z G, Wang Z Y. Technical Acoustics, 2016, 35(5), 448(in Chinese). 杨洋,褚志刚,王泽云. 声学技术, 2016, 35(5), 448. 12 Yuan J, Lin S, He C C. Noise and Vibration Control, 2006, 26(1), 68(in Chinese). 袁健,林胜,贺才春. 噪声与振动控制,2006, 26(1), 68. 13 Ma Z Y, Yang H Y, Cheng G B, et al. Journal of Northeastern University,2013, 34(7), 990(in Chinese). 马致远,杨洪英,陈国宝,等. 东北大学学报,2013, 34(7), 990. 14 Geng S L, Li F J. Science Technology and Engineering, 2009, 9(5), 1246(in Chinese). 耿森林,李芳菊. 科学技术与工程,2009, 9(5), 1246. 15 Li H B. Study on sound absorption behavior of metal foam, Master's Thesis, North China Electric Power University,China,2009(in Chinese). 李海斌. 泡沫金属吸声性能的研究. 硕士学位论文,华北电力大学,2009. |
|
|
|