基于成熟度理论持续负温下不同入模温度工况的混凝土强度预测模型

doi:10.11896/cldb.20100044

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5515KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the influence of different molding temperatures on the strength development of concrete under low negative temperature, the influence of four molding temperature conditions (5 ℃, 10 ℃, 15 ℃, 20 ℃) on the compressive strength of concrete under continuous ne-gative temperature (-5 ℃)environment and standard curing conditions was carried out. As the results show, (i) whether it is standard curing or negative temperature environment, the strength of concrete is positively correlated with the molding temperature (the higher the molding temperature, the higher the strength of concrete at the same age); (ii) negative temperature environment will inhibit the development of concrete strength, which makes the strength of concrete in negative temperature environment under the same molding temperature condition lower than that under standard curing; (iii) with the molding temperature increasing from 5 ℃ to 20 ℃, the age required for concrete under negative tempe-rature environment to reach 28 d strength under standard curing will be reduced by 7 d in turn, which is conducive to shortening the construction period of concrete engineering in alpine and frozen soil regions in China.
Based on maturity theory, logarithmic,exponential and hyperbolic function models were used to analyze the influence of molding temperature on concrete strength under continuous negative temperature environment. By comparing the fitting accuracy between different models, it is found that logarithmic model and hyperbolic model have higher fitting accuracy. The fitting accuracy of the exponential model is poor, but the exponential model can be revised to achieve a higher fitting accuracy. According to the obtained three strength-maturity models, the logarithmic, exponential and hyperbolic models of strength-molding temperature under continuous negative temperature were further established. By comparing the predicted value of the model with the measured value, it is concluded that the logarithmic model and the hyperbolic model can be used to predict the la-ter strength of concrete, but the prediction accuracy of the early strength is low. The prediction accuracy of the two types of exponential models for the strength of concrete at different ages is high, and the prediction accuracy of the second type of exponential model is the highest, which can provide reference for the prediction of concrete strength under different molding temperature conditions in alpine permafrost regions of China.

Key words： maturity molding temperature compressive strength negative temperature environment prediction model

Published: 25 March 2022 Online: 2022-03-21

CLC number:

TU528

Fund:Youth Talent Lift Project(2015142), the Cheung Kong Scholars and Innovation Team Development Plan Rolling Support(IRT_15R29) and the National Natural Science Foundation of China(52068042,51768033).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LONG Zhaofei
	ZHANG Rongling
	DUAN Yun
	GUO Haizhen
	XIAO Pengzhen
	DUAN Yawei

Cite this article:

LONG Zhaofei,ZHANG Rongling,DUAN Yun, et al. Prediction Model of Concrete Strength at Different Molding Temperature Conditions Based on Maturity Theory Under Continuous Negative Temperature[J]. Materials Reports, 2022, 36(6): 20100044-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20100044 OR http://www.mater-rep.com/EN/Y2022/V36/I6/20100044

1 Shi C J, Cao Z J, Xie Z B.Materials Reports A:Review Papers, 2016, 30(12), 96(in Chinese).
史才军, 曹芷杰, 谢昭彬. 材料导报:综述篇, 2016, 30(12), 96.
2 Kim T, Rens K L.Journal of Materials in Civil Engineering, 2008, 20(12), 727.
3 Zhang R W, Wang Q C, Zhang R L, et al. Journal of Railway Science and Engineering, 2018, 15(5), 1147(in Chinese).
张瑞稳, 王起才, 张戎令, 等. 铁道科学与工程学报, 2018, 15(5), 1147.
4 Wang J C, Yan P Y, Han J G. Journal of Building Materials, 2005(4), 446(in Chinese).
王甲春, 阎培渝, 韩建国. 建筑材料学报, 2005(4), 446.
5 Liu R Q. Research on the anti-freeze critical strength of low-temperature concrete influenced by multi-factors. Ph.D. Thesis, Dalian University of Technology, China, 2011(in Chinese).
刘润清. 多因素影响下低温混凝土抗冻临界强度的研究. 博士学位论文, 大连理工大学,2011.
6 Zou C Y, Zhao J, Liang F, et al. Journal of Building Structures, 2008(1), 117(in Chinese).
邹超英, 赵娟, 梁锋, 等. 建筑结构学报, 2008(1), 117.
7 Lee T, Lee J, Choi H. Materials, 2020, 13(7), 1505.
8 Zhang G, Yang Y Z, Li H M.Construction and Building Materials, 2020, 264,120191.
9 Sang Y, Yang Y Z.Construction and Building Materials, 2020, 238,117689.
10 Zhu R, Xu J, Zhan Y J. China Concrete and Cement Products, 2020(10), 21(in Chinese).
朱然, 徐俊, 占羿箭. 混凝土与水泥制品, 2020(10), 21.
11 Dai J P, Wang Q C, Qu S, et al. Journal of Materials Science and Engineering, 2018, 36(2), 263(in Chinese).
代金鹏, 王起才, 屈伸, 等. 材料科学与工程学报, 2018, 36(2), 263.
12 Quan L, Tian B, Feng D C, et al. Journal of Highway and Transportation Research and Development(Applied Technology), 2012, 8(2), 35.
权磊, 田波, 冯德成, 等. 公路交通科技(应用技术版), 2012, 8(2), 35(in Chinese).
13 Kim J K, Han S H, Song Y C. Cement and Concrete Research, 2002, 32(7), 1087.
14 Guan J F, Li Q B, Wu Z M,et al. Journal of Hydraulic Engineering, 2015, 46(8), 951(in Chinese).
管俊峰, 李庆斌, 吴智敏, 等. 水利学报, 2015, 46(8), 951.
15 Gong J W, Zhou Y H, Huang Y Y,et al. Advanced Engineering Sciences, 2012, 44(4), 90(in Chinese).
宫经伟, 周宜红, 黄耀英, 等. 工程科学与技术, 2012, 44(4), 90.
16 Li P P, Fan Z H, Xiong J B, et al. Concrete, 2014(10), 31(in Chinese).
黎鹏平, 范志宏, 熊建波, 等. 混凝土, 2014(10), 31.
17 Zhou Y W, Guo D X, Qiu G Q, et al. Permafrost in China, Science Press, China, 2000, pp. 161 (in Chinese).
周幼吾, 郭东信, 邱国庆, 等. 中国冻土, 科学出版社, 2000, pp. 161.
18 GB50164-2011混凝土质量控制标准. 中国建筑工业出版社, 2011.
19 GB/T 50081-2019混凝土物理力学性能试验方法标准. 中国建筑工业出版社, 2019.
20 Saul A G A. Magazine of Concrete Research, 1951, 2(6), 127.
21 Plowman J M.Magazine of Concrete Research, 1956, 8(22), 13.
22 Topgu I B, Karakurt C, Altun F. Journal of Materials in Civil Enginee-ring, 2007, 19(7), 569.
23 C1074-19 Standard practice for estimating concrete strengthen by the maturity method. West Conshohocken,PA:ASTM International, 2019.
24 JGJ/T 104-2011建筑工程冬期施工规程. 中国建筑工业出版社, 2011.
25 Carino N J.Cement, Concrete and Aggregates, 1984, 6(2), 61.