ATI 718Plus高温合金微观组织与性能研究进展

doi:10.11896/cldb.20050167

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (6351KB)
Export: BibTeX | EndNote (RIS)

Abstract ATI 718Plus (hereafter referred to as 718Plus) is an age-strengthened nickel-based wrought superalloy according to the improved IN718 superalloy, which has been widely used in hot end components for aero engines. The alloy originally introduced in the wrought state, as the demand for large and complex components in the aerospace sector increased, the wrought alloy could no longer meet the practical requirements, so the cast 718Plus alloy was developed by increasing the Nb content based on the wrought alloy and its microstructure, welding properties and tensile properties were investigated. The chemical composition and forming process of as-wrought and as-cast alloys lead to different microstructures and properties, and it is important to clarify the internal relationship between microstructure and properties of the two alloys. This paper reviews the progress of microstructure control and properties of the wrought and cast 718Plus alloys in recent years, including the influence of element contents and distribution state on the microstructure of the alloys, the function of heat treatment regime on the distribution state of γ' and η phases, and the relationship between hot deformation process and the microstructure of the alloys. As a result, the optimum hot processing parameters are obtained, the mechanism of service environment on creep, fatigue, welding and oxidation resistance of alloy is summarized, and the problems and development trend in the process of alloy research are analyzed eventually.

Key words： 718Plus alloy chemical composition hot deformation heat treatment regime work ability

Published: 25 February 2022 Online: 2022-02-28

CLC number:	TB31
	TG146.1

Fund:National Natural Science Foundation of China (52175312), High-level Talent Funding Project of Hebei Province (A201902008), Natural Science Foundation of Hebei Province (E2019202161), Fund of State Key Laboratory of New Brazing Materials and Technology(SKLABFMT201804).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Jianbo
	LI Jing'an
	PENG Yuanyi
	XIA Xingchuan
	LIU Chang
	DING Jian
	CHEN Xueguang
	LIU Yongchang

Cite this article:

ZHANG Jianbo,LI Jing'an,PENG Yuanyi, et al. Reviews on the Study of Microstructure and Properties of ATI 718Plus Superalloy[J]. Materials Reports, 2022, 36(4): 20050167-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20050167 OR http://www.mater-rep.com/EN/Y2022/V36/I4/20050167

1 Huang Q Y, Li H K.Superalloy, Metallurgical Industry Press, China, 2000,pp.6(in Chinese).
黄乾尧, 李汉康. 高温合金, 冶金工业出版社, 2000, pp. 6.
2 Ding J, Jiang S, Li Y, et al. Intermetallics, 2018, 98, 28.
3 Wu J, Liu Y C, Li C, et al. Intermetallics, 2019, 109, 48.
4 Wu J, Liu Y C, Li C, et al. Acta Metalica Sinica, 2020, 56 (1), 21(in Chinese).
吴静, 刘永长, 李冲, 等. 金属学报, 2020, 56(1), 21.
5 Wang M Q, Tian C G, Nan Y, et al. Materials Reports A:Review Papers, 2017, 31(10), 72(in Chinese).
王妙全, 田成刚, 南洋, 等. 材料导报:综述篇, 2017, 31(10), 72.
6 Du J H, Zhao G P, Deng Q, et al. Journal of Aeronautical Materials, 2016, 36 (3), 27(in Chinese).
杜金辉,赵光普,邓群,等. 航空材料学报, 2016, 36(3), 27.
7 Wang M Q. In: High Temperature Materials Branch of China Metal Society. Beijing, 2015, pp.42(in Chinese).
王民庆. 中国金属学会高温材料分会. 北京, 2015, pp. 42.
8 Wang M Q, Deng Q, Du J H, et al. Rare Metal Materials and Enginee-ring, 2016, 45(12), 3335(in Chinese).
王民庆, 邓群, 杜金辉, 等. 稀有金属材料与工程, 2016, 45(12), 3335.
9 Ruiz O C, Sjöberg G, Gómez-Acebo T, et al. Superalloy 718 and Derivatives, 2012, pp.689.
10 Peterson B, Krishnan V, Brayshaw D, et al. In: Proceedings of the 7th International Symposium on Superalloy. USA, 2010, pp. 132.
11 Peterson B, Frias D, Brayshaw D, et al. In: Proceedings of the 7th International Symposium on Superalloy. USA, 2010, pp. 787.
12 Zickler G A, Schnitzer R, Radis R, et al. Materials Science and Engineering A, 2009, 523(1-2), 295.
13 Wang M, Du J, Deng, Q, et al. Journal of Alloys and Compounds, 2017, 701, 635.
14 Pickering E J, Mathur H, Bhowmik A, et al. Acta Materialia, 2012, 60(7), 2757.
15 Eurich N C, Bristowe P D. Scripta Materialia, 2014, 77, 37.
16 Stotter C, Sommitsch C, Wagner J, et al. International Journal of Mate-rials Research, 2008, 99(4), 376.
17 Lech S, Kruk A, Rutkowski B, et al. In: European Microscopy Congress: Proceedings, Wiley-VCH Verlag GmbH & Co. KGaA, 2016, pp. 1122.
18 Zickler G A, Radis R, Schnitzer R, et al. Advanced Engineering Mate-rials, 2010, 12(3), 176.
19 Alabbad B, Tin S.Materials Characterization, 2019, 151, 53.
20 Burke M G, Miller M K. In:Superalloys 718.USA, 1991, pp. 450.
21 Krakow R, Johnstone D N, Eggeman A S, et al. Acta Materialia, 2017, 130, 271.
22 Lech S, Kruk A, Cempura G, et al. Journal of Materials Engineering and Performance, 2020, 29(3), 1453.
23 Decker R F, Freeman J W.Transactions of the American Institute of Mining and Metallurgical Engineers, 1957, 218(2), 277.
24 Hosseini S A, Abbasi, S M, Madar K Z, et al. Materials Chemistry and Physics, 2018, 211, 302.
25 Seyed A H, Seyed M A, Karim Z M, et al. Materials Science and Engineering A, 2018, 712, 780.
26 Wang M, Du J, Deng Q, et al. Materials Science and Engineering A, 2015, 626, 382.
27 Wang M, Deng Q, Du, J, et al. Materials Transactions, 2015, 56(5), 635.
28 Cao W D. In: Superalloy 718 and Derivatives. USA, 2004, pp. 92.
29 Mcdevitt E. In: Superalloy 718 and Derivatives. USA, 2012, pp. 981.
30 Liu X,Xu J, Deem N, et al. Delta, 2005, 10, 100.
31 Kumari G, Boehlert C, Sankaran S, et al. Journal of Materials Enginee-ring and Performance, 2020, 29(6), 3523..
32 Whitmore L, Ahmadi M R, Stockinger M, et al. Materials Science and Engineering A, 2014, 594 (31), 253.
33 Whitmore L, Ahmadi M R, Guetaz L, et al. Materials Science and Enginee-ring A, 2014, 610(29), 39.
34 Whitmore L, Leitner H, Povoden-Karadeniz E, et al. Materials Science and Engineering A, 2012, 534, 413.
35 Zhao W, Dong J X, Zhang M C, et al. Journal of Material Heat Treatment, 2015(1), 5(in Chinese).
赵薇, 董建新, 张麦仓, 等.材料热处理学报, 2015(1), 5.
36 Ahmadi M R, Povoden E, Whitmore L, et al. Materials Science and Engineering A, 2014, 608, 114.
37 Li Y, Li C, Wu J, et al. Materials Letters, 2019, 250, 147.
38 Ding J, Jiang S, Wu Y, et al. Materials Letters, 2018, 211, 5.
39 Wu Y, Liu Y, Li C, et al. Journal of Alloys and Compounds, 2017, 712, 6875.
40 Shi X N, Liu Y Y, Ning Y Q, et al. Rare Metals, 2019(6), 613(in Chinese).
史晓楠, 刘莹莹, 宁永权,等.稀有金属, 2019(6), 613.
41 Chen X, Qi Y G, Shi X N, et al. Rare Metals, 2019,43(12), 1260(in Chinese).
陈曦, 亓耀国, 史晓楠, 等. 稀有金属, 2019,43(12), 1260.
42 Stefan M, Christof S, Daniel H, et al. Materials Science and Engineering A, 2011, 528(11), 3754.
43 Kienl C, León-Cázares F D, Rae C M F, et al. Acta Materialia, 2020, 115473.
44 Kienl C, Casanova A, Messé O, et al. In:Proceedings of the 9th International Symposium on Superalloy 718 and Derivatives: Energy, Aerospace, and Industrial Applications. Morgantown, 2018, pp. 413.
45 Asala G, Andersson J, Ojo O A, et al. International Journal of Advanced Manufacturing Technology, 2019, 103(1), 1419.
46 Zhang J B, Wu C J, Peng Y Y, et al. Journal of Alloys and Compounds, 2020,835, 155195.
47 Asala G, Ojo O A.Results in Physics, 2016, 6, 196.
48 Idowu O A, Ojo O A, Chaturvedi M C, et al. Materials Science & Engineering A, 2007, 454-455, 389.
49 Ni T, Dong J.Materials Science and Engineering: A, 2017, 700, 406.
50 Hayes R W, Unocic R R, Nasrollahzadeh M.Metallurgical and Materials Transactions A, 2015, 46(1), 218.
51 Chen K, Dong J, Yao Z, et al. Materials Science and Engineering: A, 2018, 738, 308.
52 Telesman J, Gabb T, Garg A, et al. In: Superalloy 718 and Derivatives. USA, 2008, pp.813.
53 Tsang J, Kearsey R M, Au P, et al. Materials at High Temperatures, 2010, 27(1),207.
54 Kattoura M, Mannava S R, Qian D, et al. International Journal of Fatigue, 2017, 104, 366.
55 Kattoura M, Telang A, Mannava S R, et al. Materials Science and Engineering A, 2018, 711, 364.
56 Unocic K A, Unocic R R, Pint B A, et al. In: Superalloy 718 and Deri-vatives, John Wiley & Sons Ltd., USA,2010, pp. 981.
57 Unocic K A, Pint B A. In: 8th International Symposium on Superalloy 718 and Derivatives. USA, 2014,pp. 671.
58 Li T F.High temperature oxidation and hot corrosion of metals, Chemical Industry Press, China, 2003,pp.71(in Chinese).
李铁藩. 金属高温氧化和热腐蚀. 化学工业出版社,2003, pp. 71.
59 Huang J P. High temperature oxidation behavior of Ni-10Cr-5Al alloy containing rare earth elements. Master's Thesis, Jiangxi University of technology, China, 2017(in Chinese).
黄嘉鹏. 含稀土元素Ni-10Cr-5Al合金高温氧化行为研究. 硕士学位论文, 江西理工大学, 2017.
60 Lech S, Gil A, Cempura G, et al. International Journal of Materials Research, 2019, 110(1), 42.
61 Kruk A, Lech S, Gil A, et al. Corrosion Science, 2020, 169, 108634.
62 Viskari L, Hörnqvist M, Moore K L, et al. Acta Materialia, 2013, 61(10), 3630.
63 Hanning F, Khan A K, Andersson J, et al. Welding in the World, 2020, 64(3), 523.
64 Chen K, Rui S Y, Wang F, et al. International Journal of Minerals Metallurgy and Materials, 2019, 26(7), 889.
65 Andersson J, Sjöberg G, Larsson J, et al. In: Superalloy 718 and Derivatives, John Wiley & Sons Ltd., USA, 2010, pp. 439.
66 Seyed A H, Karim Z M, Seyed M A, et al. Materials Science and Engineering A, 2017, 689, 103.
67 Ruiz O C, Soldevilla N. In: 8th International Symposium on Superalloy 718 and Derivatives. John Wileyand Sons Ltd., Pittsburgh, Pennsylvania, USA, 2014, pp. 220.
68 Andersson J, Sjöberg G, Larsson J. In: Proceedings of the 7th International Symposiumon Superalloy 718 and Derivatives, TMS (The Minerals, Metalsand Materials Society), 2010, pp.439.
69 Hosseini S A, Abbasi S M, Madar K Z, et al. Journal of Materials Engineering and Performance, 2018, 27(6), 2815.
70 Andersson J, Sjöberg G, Hönninen H. In: the 3rd International Hot Cracking Workshop. Columbus, Ohio, 2010,pp. 417.
71 Woo I, Nishimoto K, Tanaka K, et al. Welding in the World, 2000, 14(7), 514.
72 Singh S, Andersson J. Welding in the World, 2018, 63(2), 389.