超高性能混凝土早期600 ℃抗爆裂性能研究

doi:10.11896/cldb.20110163

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (14142KB)
Export: BibTeX | EndNote (RIS)

Abstract Ultra-high performance concrete (UHPC) is an advanced cement-based material with ultra-high strength, toughness, and durability, and has been widely used in engineering structures. However, underexposed to high-temperature conditions, UHPC with dense microstructure and extremely low permeability makes it prone to explosive spalling, which in turn affects the service life of the components. In this work, the early mechanical properties and impermeability properties of UHPC were investigated by mixing steel fiber (SF) and polypropylene (PP) fiber, and X-ray diffractometer (XRD), simultaneous thermal analyzer (TG), scanning electron microscope (SEM) and mercury injection (MIP) were utilized to determine the mechanism of UHPC exposed to high temperature at an early stage. The results show that the addition of 0.4% PP fiber can effectively suppress the early high temperature (600 ℃) burst behavior of UHPC; after exposure to high temperature, the mechanical properties of UHPC under steam curing are better than those under standard curing, and compared to properties before exposure to high temperature, the compressive strength and flexural strength loss under steam curing were 15.1% and 30.9%, respectively, while those under standard curing were 18.5% and 26.9%, respectively; the impermeability exposed to high temperature meets the P5 level; steam curing promotes the early internal cement hydration and the pozzolanic reaction of mineral admixtures of UHPC, generating more hydration products, and consuming more free water; in the internal structure of UHPC exposed to high temperature, the pores left by the melting of PP fibers and matrix pores increase to relieve the pressure of water vapor, to prevent UHPC from bursting after high temperature in the early stage.

Key words： ultra-high performance concrete curing methods exposure to high temperature microstructure mechanism analysis

Published: Online: 2022-02-10

CLC number:

TU528

Fund:National Natural Science Foundation of China (51778133, 51739008).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Jiandong
	GUO Liping
	CAO Yuanzhang
	FEI Xiangpeng

Cite this article:

WU Jiandong,GUO Liping,CAO Yuanzhang, et al. The Performance of Ultra-high Performance Concrete Exposed to 600 ℃ at Early Stage[J]. Materials Reports, 2022, 36(3): 20110163-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20110163 OR http://www.mater-rep.com/EN/Y2022/V36/I3/20110163

1 Zhang Y F, Effect of sulfur on the hydration of calcium aluminate cement and the properties of castable. Ph.D. Thesis, Wuhan University of Science and Technology, China, 2015 (in Chinese).
张业范. 硫含量对铝酸盐水泥水化过程及浇注料性能的影响.博士学位论文, 武汉科技大学, 2015.
2 Zhang Y S, Sun W, Liu S F, et al. Cement and Concrete Composites, 2008, 30(9), 831.
3 Yoo D Y, Banthia N. Cement and Concrete Composites, 2016, 73, 267.
4 Wu X, Zhang X. Journal of Building Structures, 2018, 39 (10), 156.
5 Shi C, Wu Z, Xiao J, et al. Construction and Building Materials, 2015, 101, 741.
6 Hooton R, Titherington M. Cement and Concrete Research, 2004, 34, 1561.
7 Abbas S, Soliman A M, Nehdi M L. Construction and Building Materials, 2015, 75, 429.
8 Yang S L, Millard S G, Soutsos M N, et al. Construction and Building Materials, 2009, 23 (6), 2291.
9 Shi C J, Wu Z M, Xiao J F, et al. Construction and Building Materials, 2015, 101,741.
10 Wang D H, Shi C J, Wu Z M, et al. Construction and Building Mate-rials, 2015, 96, 368.
11 Bangi M R, Horiguchi T. Cement and Concrete Research, 2011, 41(11), 1150.
12 Li Y, Pimienta P, Pinoteau N, et al. Cement and Concrete Composites, 2019, 99, 62.
13 Rivaz B. Tunnels Ouvrages Souterr No, 2006, 198, 367.
14 Tai Y, Pan H, Kung Y. Nuclear Engineering and Design, 2011, 241(7), 2416.
15 Bei S, Zhi X L. Case Studies in Construction Materials, 2016, 4, 146.
16 Xiong M X, Richard L J Y. Materiales de construcción, 2015, 65(320), 71.
17 Kalifa P, Chene G, Galle C,Cement and Concrete Research, 2001, 31(10), 1487.
18 Han C G, Hwang Y S, Yang S H, et al. Cement and Concrete Research, 2005, 35 (9), 1747.
19 Ding Y N, Zhang C, Cao M L, et al. Construction and Building Mate-rials, 2016, 113,456.
20 Bangi M R, Horiguchi T. Cement and Concrete Research, 2012, 42(2), 459.
21 Bilodeau A, Kodur V K R, Hoff G C. Cement and Concrete Composites, 2004, 26, 163.
22 Noumowé A. Cement and Concrete Research, 2005, 35, 2192.
23 Ozawa M, Morimoto H. Construction and Building Materials, 2014, 71, 83.
24 Li Y, Tan K H, Yang E H. Construction and Building Materials, 2018, 169, 629.
25 Mindeguia J C, Pimienta P, Noumowé A, et al. Cement and Concrete Research, 2010, 40 (3), 477.
26 Ju Y, Wang L, Liu H B, et al. Chinese Science Bulletin, 2015, 60(23), 2022.
27 Lee N K, Koh K T, Park S H, et al. Cement and Concrete Research, 2017, 102, 109.
28 Niu X J, Nie Y, Peng G F, et al. J Chin Ceram Soc, 2020, 48(8), 1212 (in Chinese).
牛旭婧, 乜颖, 朋改非, 等.硅酸盐学报, 2020, 48(8), 1212.
29 Peng G, Yang W, Zhao J, et al. Cement and Concrete Research, 2006, 36, 723.