碳纤维复合材料的回收与再利用技术

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1469KB)
Export: BibTeX | EndNote (RIS)

Abstract The application market for carbon fiber reinforced resin composite materials (CFRP) is increasing. The wide application and upgrading of CFRP components have brought about the treatment of waste and scrapped products and environmental protection issues. The research on CFRP recycling and reuse technology has caused many manufacturers and the attention of experts and scholars. This article reviews the cha-racteristics, processes and application status of existing CFRP recycling and reuse technologies, analyzes the relationship between the molding process of common CFRP parts and applicable recycling technologies, and discusses the technology, supply, and regulations of CFRP parts recycling technology. Looking forward to the development trend of CFRP recycling technology.

Key words： carbon fiber composite material recycling technology reuse technology

Published: 09 December 2021

CLC number:	X705
	TQ327.3

Fund:This work was financially supported by the Guangdong Natural Fund Project (2018A030307004), 2020 Guangdong Province Educational Science “13th Five-Year Plan” Project (2020GXJK160), Guangdong Province University Characteristic Innovation Project(2019ktscx110), Projects of Talents Recruitment of GDUPT (2019rc047), Projects of Maoming City Philosophy and Social Science Planning (2020GJ03).

About author:: Weijie Hu, Ph.D., graduated from Tianjin University with a bachelor's degree, a master's degree from the Graduate School of the Chinese Academy of Sciences, and a Ph.D. degree from the University of the Chinese Academy of Sciences. Engaged in physical chemistry, new chemical materials, chemical park management (smart park construction and safety direction), science popularization system construction and other basic scientific research and industry-university-research applied research work for nearly 20 years. Participated in or presided over more than 40 scientific and technological projects, published more than 20 domestic and foreign research papers, applied for more than 30 domestic patents (12 authorized), and the main drafter of the national standard “GB 2019 Smart Chemical Park Construction Guide”.
Qinggang Ren, Ph.D. (post), graduated from Liaocheng University with a bachelor's degree, graduated from Guangdong University of Technology with a master's degree, and graduated with a Ph.D. from Sun Yat-Sen University. He is currently a teacher of the Guangdong Institute of Petrochemical Technology, a member of the 10th Council of the Guangdong Chemical Industry Society, and a member of the Polymer Professional Committee of the 10th Council of the Guangdong Chemical Industry Society. Engaged in the preparation of acrylic resin, polyurethane resin and alkyd resin for adhesives/coatings/inks, the development and application of degradable plastics, and the preparation of special chemicals for electronics and electrical appliances for more than 10 years. Published 10 papers in important domestic journals, authorized two Chinese patents, and presided over a joint training project of Guangdong Natural Science Foundation-Guangdong East, West and North of Innovative Talents.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HU Weijie
	ZHONG Mingjian
	YANG Ying
	PAN Maosen
	REN Qinggang

Cite this article:

HU Weijie,ZHONG Mingjian,YANG Ying, et al. Recycling and Reuse Technology of Carbon Fiber Composite Materials[J]. Materials Reports, 2021, 35(z2): 627-633.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2021/V35/Iz2/627

1 贺福, 孙微. 高科技纤维与应用, 2007, 32(6), 9.
2 胡良全. 2011中国功能材料科技与产业高层论坛, 重庆, 2011.
3 邢丽英, 冯志海, 包建文, 等. 复合材料学报, 2020, 37(11), 2700.
4 李洺君, 王明明, 吕文静. 时代汽车, 2020(8), 31.
5 徐建全, 杨沿平, 唐杰, 等. 汽车工程, 2012, 34(6), 540.
6 熊皓, 王学花, 张纯琛, 等. 科技风, 2020(31), 179.
7 王军照. 今日制造与升级, 2020(8), 48.
8 Kari Larsen.Renewable Energy Focus, 2009, 9(7), 70.
9 Pimenta Soraia, Pinho Silvestre T.Waste Management, 2011, 31(2), 378.
10 李晓林, 黄海超, 李杨, 等. 化工管理, 2020, 551(8), 75.
11 张建川. 玻璃钢, 2010(4), 12.
12 任彦. 新材料产业, 2014(8), 19.
13 罗益锋. 纺织导报, 2013(12), 36.
14 Howarth J, Mareddy S, Mativenga P.Journal of Cleaner Production, 2014, 81, 46.
15 Ogi K, Nishikawa T, Okano Y, et al.Advanced Composite Materials, 2007, 16(2), 181.
16 Soraia P, Silvestre T. Waste Management, 2011, 31(2), 378.
17 Marsh G.Reinforced Plastics, 2008, 52, 36.
18 Meyer L.O, Schulfe K, Grove-Nielsen E.Journal of Composite Materials, 2009, 43(9), 1121.
19 Giorgini L, Benelli T, Mazzocchetti L, et al.Polymer Composites, 2015, 36(6), 1084.
20 Pimenta S, Pinho S T.Waste management, 2011, 31(2), 378.
21 Jiang S J, Pickering G S, Walker N.Thermochimica Acta, 2007, 454(2), 109.
22 张东致, 万怡灶, 罗红林, 等. 中国塑料, 2013, 27(2), 1.
23 杜晓渊, 程小全, 王志勇, 等. 高分子材料科学与工程, 2020, 36(8), 182.
24 Jiang G, Wong K H, Pickering S J, et al. In: SAMPE Fall Technical Conference: Global Advances in Materials and Process Engineering, Dallas, 2006.
25 Jiang G, Pickering SJ, Walker G S, et al. Applied Surface Science, 2008, 254(9), 2588.
26 Yip H H, Pickering S J, Rudd C D. Plastics Rubber and Composites, 2002, 31(6), 278.
27 George M.Reinforced Plastics, 2009, 53(4), 22.
28 Fangtao R, Jian S, Zhenzhen X U, et al.Textile Research, 2019, 40(6), 152.
29 Liu Y, Meng L, Huang Y, et al.Applied Polymer Science, 2010, 94(5), 1912.
30 Piñero-Hernanz R, et al.The Journal of Supercritical Fluids, 2008, 46(1), 83.
30 Piero-Hernanz R, García-Serna J, Dodds C, et al.The Journal of Supercritical Fluids , 2008, 46(1), 83.
31 Piero-Hernanz R, Dodds C, Hyde J, et al. Composites Part A Applied Science & Manufacturing, 2008, 39(3), 454.
32 Huang H, Zhang B, Cheng H, et al.Journal of Materials Science and Engineering, 2019, 37(2), 189.
33 Keith M J, Roman L A, Leeke G, et al.Polymer Degradation and Stability, 2019, 161, 225.
34 Morin C, Loppinet A, Cansell F, et al. Journal of Supercritical Fluids The, 2012, 66, 232.
35 Kim Y N, Kim Y O, Kim S Y, et al.Composites Science and Technology, 2019, 173, 66.
36 Knight C C, Zeng C, Zhang C, et al. Materials Chemistry & Physics, 2015, 149, 317.
37 Okajima I, Sako T.Journal of Material Cycles & Waste Managemen, 2017, 19, 15.
38 Okajima I, Sako T.Polymer Degradation and Stability, 2019, 163, 1.
39 Okajima I, Hiramatsu M, Shimamura Y, et al. Journal of Supercritical Fluids, 2014, 91, 68.
40 惠林海, 张璐, 李华, 等. 工程塑料应用, 2020, 48(8), 149.
41 陶振刚. 碳纤维复合材料注塑成型性研究. 硕士学位论文, 上海工程技术大学, 2015.
42 李一军. 广东科技, 2012, 21(21), 202.
43 Tanaka K, Kohashi N, Kinoshita Y, et al.Society of Materials Science Japan, 2009, 58(7), 642.
44 胡章平. 长玻璃纤维增强聚丙烯复合材料模压成型工艺研究. 硕士学位论文, 湖南大学, 2015.
45 Peng S U, Wen F C. Modern Manufacturing Technology and Equipment, 2016, 11, 165.
46 Langella A, Carbone R, Durante M. Applied Composite Materials, 2012, 19(6), 901.
47 王瑛琪, 盖登宇, 宋以国. 材料导报, 2011, 25(5), 110.
48 张婧, 于今, 熊磊, 等. 科技导报, 2016, 34(8), 26.
49 王跃飞. 碳纤维增强复合材料HP-RTM成型工艺及孔隙控制研究. 硕士学位论文, 湖南大学, 2017.
50 朱怡臻, 王瑛, 陈鸣亮, 等. 塑料工业, 2020, 48(5), 18.