Materials Reports  2021, Vol. 35 Issue (z2): 448-451 |
| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Defect and Microstructure of W-Nb Alloy Fabricated by Selective Electron Beam Melting |
| YANG Guangyu, TANG Huiping, LIU Nan, JIA Wenpeng, JIA Liang, YANG Kun, WANG Jian
|
| National Key Laboratory of Porous Metal Materials, Northwest Institute for Nonferrous Metal Research, Xi’an 710016, China |
|
|
|
|
Abstract W-3.5Nb alloy was formed by selective electron beam melting (SEBM). Defect and microstructure of W-3.5Nb alloys that were fabricated by different process of low-speed scanning, high-speed scanning and remelting were analyzed. The results show that: lack of fusion and micro-cracks are main defects in SEBMed W-3.5Nb alloys. Low-speed scanning can effectively reduce the content of defects. Lack of fusion defects are caused by the spheroidization and the disturbance of the molten pool. The micro-cracks are mainly caused by shrinkage between dendrites during the solidification process. Due to the different solidification processes of the molten pool at different scanning speeds, W-3.5Nb showed different microstructural. Epitaxial growth is not obvious due to the inadequate fusion under high-speed scanning, leading fine microstructure and not obvious preferred orientation. At low scanning speed, thick columnar crystal structure with (001) preferred orientation along the forming direction is formed by epitaxial growth. At the remelting condition, the columnar crystal and the preferred orientation of the grain are weakened.
|
|
Published: 09 December 2021
|
|
|
| Fund:This work was financially supported by the Science Challenge Project (TZ2018006), Key Research and Development Projects in Shaanxi Province(2021KW-34). |
| About author:: Guangyu Yang received her master degree in Central South University in 2011. She is currently a senior engineer in Northeast Institute for nonferrous metal reserch. Her research interests are 3D printing techology for me-tal material such as titanim, refractory metal. |
|
|
1 Butler B G, Paramore J D, Ligda J P, et al. International Journal of Refractory Metals and Hard Materials, 2018, 75, 248.
2 Panayotis S, Hirai T, Barabash V, et al. Fusion Engineering and Design, 2017, 125, 256.
3 Liu D G, Zheng L, Luo L M, et al. Journal of Alloys and Compounds, 2018, 765, 299.
4 殷为宏,汤慧萍. 难熔金属材料与工业应用, 冶金工业出版社, 2012.
5 Xu M Y, Luo L M, Zhou Y F, et al. Fusion Engineering and Design, 2018, 132, 7.
6 Han W, Zhu K, Yan J, et al. Nuclear Materials and Energy, 2020, 23, 100741.
7 Chen J B, Luo L M, Lin J S, et al. Journal of Alloys and Compounds, 2017, 694, 905.
8 Meher P, Kiran C, Patra A, et al. Materials Today: Proceedings, 2019, 18, 765.
9 Ngo T D, Kashani A, Imbalzano, et al. Composites Part B: Engineering, 2018, 143, 172.
10 Gu D, Guo M, Zhang H, et al. International Journal of Extreme Manufacturing, 2020, 2, 025001.
11 Ivekovic A, Omidvari N, Vrancken B, et al. International Journal of Refractory Metals and Hard Materials, 2018, 72, 27.
12 Sidambe A T, Tian Y, Prangnell P B, et al. International Journal of Refractory Metals and Hard Materials, 2019, 78, 254.
13 Wang D, Wang Z, Li K, et al. Materials and Design, 2019, 162, 384.
14 Wrogjt J. Additive manufacturing of tungsten via selective laser melting and electron beam melting. Ph.D. Thesis, The University of Sheffield, England, 2020.
15 Zhou X, Liu X, Zhang D, et al. Journal of Materials Processing Techno-logy, 2015, 222, 33.
16 Schwerdtfeger J, Körner C. Intermetallics, 2014, 49, 29.
17 Jian L, To A C. Additive Manufacturing, 2017, 16, 58
18 Marattukalama J J, Karlssonb D, Pacheco V. Materials and Design, 2020, 193, 108852.
19 胡汉起.金属凝固原理,机械工业出版社,2000.
20 Liu J W, Kou S. Acta Materialia, 2016, 10, 84.
21 https://www.plansee.com/en/materials/tungsten.html. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
