Materials Reports 2021, Vol. 35 Issue (z2): 417-423 |
METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research Progress on the Additive Manufactured High Entropy Alloys of AlxCoCrFeNi System |
YUAN Biliang, LI Chuanqiang, DONG Yong, ZHANG Peng
|
School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China |
|
|
Abstract Recently, more and more researchers pay attention on the research of high entropy alloys (HEAs) of AlxCoCrFeNi system due to their unique composition and excellent performance. When compared with traditional as-cast AlxCoCrFeNi HEAs, the additive manufactured counterparts generally present highly effective production and excellent mechanical properties, promoting their development and application in practice. The latest researches on the additive manufactured AlxCoCrFeNi HEAs, including their preparation of powder, printing process, microstructure and properties, applications and outlooks, are reviewed in this paper. Firstly, the fundamental introduction on the AlxCoCrFeNi HEAs and the common methods of additive manufacture are introduced in detail. Secondly, the pre-alloying powders of AlxCoCrFeNi HEAs and their characteristics are summarized. Thirdly, the printing parameters and the properties of additive manufactured AlxCoCrFeNi HEAs fabricated by the selective laser melting (SLM), directed energy deposition (DED) and laser cladding are discussed to clarify the influence of volume energy density, laser power, scanning velocity and scanning strategies on their properties and the possible defects. Besides, microstructure, mechanical and corrosion properties of additive manufactured AlxCoCrFeNi HEAs are analyzed. Finally, the application prospects of AlxCoCrFeNi HEAs in various fields are summarized, and also the existing problems in current studies, the research emphasis and research direction of research in the future are pointed out.
|
Published: 09 December 2021
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (51801029, 51901047). |
About author:: Biliang Yuan received his B.S. degree in engineering science from Jiangxi University of Science and Techno-logy in June 2019. Now he is currently pursuing his M.D. at School of Materials and Energy, Guangdong University of Technology, under the supervision of Prof. Peng Zhang and Dr. Chuanqiang Li. His research has focused on the process and performance of additive manufactured high-entropy alloys. Chuanqiang Li received his B.E. degree from Nor-theastern University in 2013, received his Ph.D. degree from Northeastern University & Institute of Metal Research, Chinese Academy of Sciences in 2018 and completed the exchanging study at Monash University in Australia from 2016 to 2017. He was recruited as lecture under “Young 100 People Program” of Guangdong University of Technology in 2018, and host 3 research projects, including National Natural Science Foundation of China, National Natural Science Foundation of Guangdong Province and Basic and Applied Basic Research program of Guangzhou. His research interests are the new me-tal material and forming process, and he has published more than 20 papers, including Scientific Reports, Electrochimica Acta, Materials & Design, Mate-rials Science & Engineering A and Journal of Materials Science & Technology, etc. |
|
|
1 Singh R. Applied welding engineering (third edition), Butterworth-Heinemann, UK, 2020. 2 Yeh J W, Chen S K, Lin S J, et al. Advanced Engineering Materials, 2004, 6(5), 299. 3 Zhang Y, Zuo T T, Tang Z, et al.Progress in Materials Science, 2014, 61, 1. 4 Niu C, Larosa C R, Miao J, et al.Nature Communications, 2018, 9, 1363. 5 Otto F, Dlouhy A, Somsen C, et al.Acta Materialia, 2013, 61(15), 5743. 6 Rao J C, Ocelik V, Vainchtein D, et al.Materials Letters, 2016, 176, 29. 7 Li B Y, Peng K, Hu A P, et al.Transactions of Nonferrous Metals Society of China, 2013, 23(3), 735. 8 贺毅强, 徐虎林, 任昌旭, 等.有色金属工程, 2020, 10(6), 29. 9 Zhang H, Yang Y, Hu K H, et al.Additive Manufacturing, 2020, 34(10), 1199. 10 Nofal M, Alhallaj S, Pan Y.Journal of Manufacturing Processes, 2019, 44, 91. 11 He Q L, Jiang J, Yang X F, et al.Journal of the European Ceramic Society, 2020, 41(1), 1033. 12 Zhang G, Chen H, Yang S B, et al.Journal of the European Ceramic Society, 2018, 38(11), 4014. 13 杨胶溪, 柯华, 崔哲, 等.航空制造技术, 2020, 63(10), 14. 14 Yang S F, Liu Z L, Pi J H.Materials Letters, 2020, 261, 127004. 15 Wang Y, Li R D, Niu P D, et al.Intermetallics, 2020, 120, 106746. 16 Wei M W, Chen S Y, Sun M, et al.Powder Technology, 2020, 367, 724. 17 Neikov O D, Vasilieva G I, Sameljuk A V, et al.Materials Science and Engineering A, 2004, 383(1), 7. 18 陈哲, 陆伟, 严彪.金属功能材料, 2012, 19(3), 51. 19 Lin W C, Chang Y J, Hsu T H, et al.Additive Manufacturing, 2020, 36, 101601. 20 Liang J T, Cheng K C, Chen S H.Journal of Alloys and Compounds, 2019, 803, 484. 21 Zhou S C, Zhang P, Xue Y F, et al.Transactions of Nonferrous Metals Society of China, 2018, 28(5), 939. 22 Yu Y, Xu N N, Zhu S Y, et al.Journal of Materials Science & Technology, 2020, 69, 48. 23 Zhang M N, Zhou X L, Wang D F, et al.Materials Science and Enginee-ring: A, 2019, 743, 773. 24 Peyrouzet F, Hachet D, Soulas R, et al.Jom, 2019, 71(10), 3443. 25 Niu P D, Li R D, Yuan T C, et al.Intermetallics, 2019, 104, 24. 26 Luo S, Gao P, Yu H, et al.Journal of Alloys And Compounds, 2019, 771, 387. 27 Yim D, Sathiyamoorthi P, Hong S J, et al.Journal of Alloys and Compounds, 2019, 781, 389. 28 Gu Z, Xi S Q, Mao P, et al.Surface and Coatings Technology, 2020, 401, 126244. 29 Aramian A, Razavi S M J, Sadeghian Z, et al.Additive Manufacturing, 2020, 33, 101130. 30 Iveković A, Montero-sistiaga M L, Vanmeensel K, et al.International Journal of Refractory Metals and Hard Materials, 2019, 82, 23. 31 Kim J, Wakai A, Moridi A.Journal of Materials Research, 2020, 35(15), 1963. 32 Luo S C, Zhao C Y, Su Y, et al.Additive Manufacturing, 2020, 31. 33 Karimi J, Ma P, Jia Y D, et al.Manufacturing Letters, 2020, 24, 9. 34 Li B, Zhang L, Xu Y, et al.Powder Technology, 2020, 360, 509. 35 Sun Z, Tan X P, Wang C C, et al. Acta Materialia, 2021, 204, 116505. 36 Zhang C C, Feng K, Kokawa H, et al.Materials Science and Engineerin: A, 2020, 789, 139672. 37 Ocelik V, Janssen N, Smith S N, et al.JOM, 2016, 68(7), 1810. 38 Wan H X, Song D D, Shi X L, et al.Journal of Materials Science & Technology, 2021, 60, 197. 39 Dada M, Popoola P, Mathe N, et al.Materials Today: Proceedings, 2020, https://doi.org/10.1016/j.matpr.2020.04.198. 40 Joseph J, Jarvis T, Wu X, et al.Materials Science and Engineering A, 2015, 633, 184. 41 蒋淑英, 林志峰, 许红明.稀有金属, 2018, 42(12), 1241. 42 刘源, 陈敏, 李言祥, 等.稀有金属材料与工程, 2009, 38(9), 1602. 43 Sarswat P K, Sarkar S, Murali A, et al.Applied Surface Science, 2019, 476, 242. 44 Afolabi A E, Popoola O, Popoola A P I, et al.The International Journal of Advanced Manufacturing Technology, 2020, 108(11-12), 3563. 45 张毅勇, 张志彬, 姚雯, 等. 表面技术, 2020, 50(1), 117. 46 Pu G, Lin L, Ran A, et al.Applied Surface Science, 2020, 516, 146129. 47 李鹏德, 吴有智, 张爱军, 等.摩擦学学报, 2017, 37(4), 457. 48 洪丽华, 张华, 唐群华, 等.稀有金属材料与工程, 2015, 44(2), 424. 49 魏耀光, 郭刚, 李静, 等.航空材料学报, 2019, 39(5), 82. 50 谢红波, 刘贵仲, 郭景杰, 等.材料工程, 2016, 44(4), 65. 51 Yan X H, Zhang Y.Scrita Materialia, 2020, 187, 188. 52 Salmi A, Atzeni E, Iuliano L, et al.In: 10th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME). Ischia, 2017, pp. 458. 53 Gao C, Liu Z, Xiao Z, et al.Journal of Alloys and Compounds, 2021, 853. 54 果春焕, 王泽昌, 严家印, 等.工程科学学报, 2020, 42(5), 540. |
|
|
|