空心微珠增强铝基复合材料的制备工艺及性能研究进展

Abstract
Figure/Table
References
Related Citation (14)

Download:

Full Text ( PDF ) (4865KB)
Export: BibTeX | EndNote (RIS)

Abstract The technology of metal matrix composites is developing rapidly recently. Particle-reinforced aluminum matrix composites retain the properties of conductive thermal conductivity, low density and high plasticity. The strength and wear resistance of aluminum alloy composites are also improved. The damping and electromagnetic shielding properties of hollow bead reinforced aluminum matrix composites are greatly improved. Hollow bead reinforced aluminum matrix composites have broad application prospects in mechanical manufacturing, aerospace, electronics, weapons, automobile, construction, sports and other industries. Hollow microspheres were added into light metals to prepare particle reinforced metal matrix composites. Hollow microspheres can reduce the density of the matrix, improve the stiffness and strength of the matrix, and improve the dimensional stability and heat resistance of the material. In this paper, the research progress of hollow bead reinforced aluminum matrix composites in recent years is reviewed, including the preparation technology, thermophysical properties, electromagnetic shielding properties. The application prospect and development trend of hollow bead reinforced aluminum matrix composites are prospected.

Key words： hollow microspheres aluminum matrix composite fabrication process physical property electromagnetic performance

Published: 09 December 2021

CLC number:

TB331

About author:: Fei Yan was born in 1974 and obtained the title of senior engineer. Mainly engaged in radar structure technology overall research, production management, etc.
Hui Lyu was born in 1991 with the title of engineer. The research direction is precision machining, material forming, special machining, etc.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YAN Fei
	LI Chunlin
	LYU Hui

Cite this article:

YAN Fei,LI Chunlin,LYU Hui. Progress in Fabrication and Properties of Hollow Microspheres Reinforced Aluminum Matrix Composites[J]. Materials Reports, 2021, 35(z2): 376-380.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2021/V35/Iz2/376

1 赵玉涛. 原位合成铝基复合材料, 科学出版社, 2016.
2 郑开宏. 广东省金属基复合材料产业技术路线图, 华南理工大学出版社, 2018.
3 Gibson L. Annual Review of Materials Science, 2000, 30,191.
4 Dorian K Balch John G O'Dwyer. Materials Science and Engineering,2005,391,408.
5 Wang H, Zhou X Y, Long B, et al. Materials Science and Engineering A, 2013, 582,316.
6 Uju W A, Oguocha I N A. Materials & Design, 2012, 33, 503.
7 林颖菲. 玻璃空心微珠/Al多孔复合材料微观组织与压缩特性研究. 博士学位论文,哈尔滨工业大学, 2017.
8 窦作勇. 空心球/Al多孔材料阻尼与冲击吸能行为及其机理研究. 博士学位论文,哈尔滨工业大学, 2008.
9 杨金龙, 席小庆, 黄勇. 陶瓷微珠. 清华大学出版社, 2017.
10 罗燕, 陈敏. 轻工科技, 2012, 3(3),24.
11 Rohatgi P K, Guo R Q, Iksan H, et al. Materials Science and Enginee-ring A, 1998, 244(1), 22.
12 Zhang X F, Wang, D J, Xie G. Acta Metallurgica Sinica, 2002, 15(5), 465.
13 Guo R Q, Rohatgi P K, Ray S. Transactions of the American Foundrymen's Society, 1996, 104, 1097.
14 Guo R Q, Venugopalan D, Rohatgi P K. Materials Science and Enginee-ring A, 1998, 241, 184.
15 吴林丽, 刘宜汉, 孙淑萍, 等. 东北大学学报, 2003, 24(6), 583.
16 蒋爱蓉, 孙玉福, 杨久俊, 等. 铸造, 2008, 57(7), 671.
17 Mondal D P, Das S, Ramakrishnan N, et al. Composites Part A: Applied Science and Manufacturing, 2009, 40(3),279.
18 王英杰, 龙文元, 罗燕. 材料热处理技术, 2008, 37(6), 92.
19 龙文元, 夏春, 张丽攀, 等.铸造技术, 2007, 28(3),393.
20 Rajan T P D, Pai B C, Pillai R M. Composites Science and Technology, 2007, 67, 3369.
21 Vendra L J, Rabiei A. Materials Science and Engineering A, 2007, 465(1-2), 59.
22 Castro G, Nutt S R. Materials Science and Engineering A, 2012, 535, 274.
23 中国材料研究学会. 2006年材料学与工程新进展. 化学工业出版社, 2007.
24 Lin Y F, Zhang Q, Zhang F Y, et al. Materials Science and Engineering A, 2017, 696, 236.
25 Palmer R A, Gao K, Doan T M, et al. Materials Science and Engineering A, 2007, 464(1-2),85.
26 Orbulov I N. Materials Science and Engineering A, 2013, 583,11.
27 Guo R Q, Pohatgi P K, Nath D. Journal of Materials Science, 1997, 32(15),3971.
28 张雄飞, 王达健, 谢刚, 等. 中国有色金属学报, 2001, 11(2), 68.
29 Neville B P, Rabiei A. Materials & Design, 2008, 29(2),388.
30 长谷川正义.喷射弥散强化合金,北京:国防工业出版社,1986.
31 黄晓莉, 武高辉, 窦作勇.功能材料,2005(4),69.
32 Dou Z Y, Wu G H, Jiang L T, et al. Transactions of Nonferrous Metals Society of China, 2006, 16(3),1634.
33 李月英, 韦东远, 曹占义, 等. 汽车工艺与材料, 2000(2), 25.
34 汪正兴, 翁巍, 马乃恒, 等.热加工工艺, 2009,38(10),128.
35 GuoR Q,RohatgiP K,Ray S. Trans. Am. Foundrymen's Soc., 1996,104,1097.
36 蒋爱蓉, 孙玉福, 杨久俊,等.铸造, 2008,57(7),671.
37 Pohatgi P K, Gupta N, Alaraj Simon. Journal of Composite Materials, 2006, 40(13), 1163.
38 Dou Z Y,Gao H Y,et al. Composites Part A,2007,38,186.