基于X-ray CT技术研究混凝土内部损伤的研究进展

doi:10.11896/cldb.20060246

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (12404KB)
Export: BibTeX | EndNote (RIS)

Abstract The internal microstructure and damage of concrete can be observed and analyzed by X-ray CT scanning, which is of great significance for studying the performance of concrete materials. The contradiction between the resolution of CT and the size of the specimen and the limitation of loading equipment hinder the popularization and application of CT in the research of concrete materials. With the optimization of CT equipment, the research of concrete has gradually developed from qualitative to quantitative analysis using CT, which providing a reliable method for research on the performance of concrete materials in the further.
In the past five years, the research on concrete through CT has developed from pore distribution, crack propagation shape and location, fiber distribution and fiber corrosion to quantitative analysis. Five quantitative analysis of concrete by CT as follows: firstly, analyze the concrete da-mage rules by calculating the volume of each phase under different conditions. Secondly, study the relationship between pore and concrete da-mage by analyzing pore parameters, such as pore size, pore size distribution and different pore volume ratio, etc. Thirdly, study the variation rule of concrete fracture by analyzing the variation of crack width and volume. Fourthly, study the influence of fiber on the concrete properties by quantitatively evaluating the dispersion state and direction of the fibers in the concrete. Finally, build three-dimensional model based on CT images, obtain the elastic modulus and stress-strain distribution and compare with the test results.
This paper is reviewed the variation rules of pore structure and cracks about concrete by X-ray CT in recent years, especially in the past five years. The advantages and disadvantages of the application of X-ray CT for studying concrete are analyzed, which can provide references for concrete researchers.

Key words： X-ray CT concrete CT equipment quantitative analysis internal damage

Published: 30 November 2021

CLC number:

TU528

Fund:National Natural Science Foundation of China (11762015,11362013).

About author:: Na Li received her master's degree in engineering from Inner Mongolia University of Technology in July 2012. She is currently pursuing her Ph.D. at College of Science, Inner Mongolia University of Technology under the supervision of prof. Yanru Zhao. She is also a tea-cher of Inner Mongolia Technical College of Construction. Her research has focused on durability of concrete.
Yanru Zhao is professor and supervisor of mechanics doctoral student, supervisor of civil engineering master. She currently works in department of architectural engineering, School of Civil Engineering, Inner Mongolia University of Technology. The mechanical properties and durability of concrete, electron beam moire technology and its application and the interface mechanical properties of fiber reinforced composites were main studied.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Na
	ZHAO Yanru

Cite this article:

LI Na,ZHAO Yanru. Research Progress of Concrete Internal Damage Based on X-ray CT Technology[J]. Materials Reports, 2021, 35(21): 21169-21177.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20060246 OR http://www.mater-rep.com/EN/Y2021/V35/I21/21169

1 Hounsfield G N. The British Journal of Radiology, 1973, 46, 1016.
2 Plessis A D, Boshoff W P.Construction and Building Materials, 2019, 199, 637.
3 Morgan I L, Ellinger H, Klinksiek R, et al. Journal of the American Concrete Institute, 1980, 77(1), 23.
4 Tian W, Han N. Advances in Materials Science and Engineering, 2017(3),13.
5 Hou T C, Nguyen V K, Su Y M, et al. Construction and Building Materials, 2017, 133, 397.
6 Lei G Y, Han J C, Dang F N. Advances in Materials Science and Engineering, 2018, 2018,9.
7 Chen J X, Deng X H, Luo Y B, et al. Construction and Building Mate-rials, 2015, 83, 275.
8 Lukovic M, Ye G . Materials, 2016, 9, 2.
9 Yasmina Shields, Edward Garboczi, Jason Weiss, et al. Cement and Concrete Composites, 2018, 89, 120.
10 Wan K S, Xue X B. Materials Characterization, 2013, 82, 32.
11 Hong S X, Liu P, Zhang J C, et al. Cement and Concrete Composites, 2019, 100, 15.
12 Skarżyński Ł, Tejchman J. Strain, 2016, 52, 26.
13 Tyler Oesch, Eric Landis, Daniel Kuchma. Materials and Structures, 2018, 51, 73.
14 Yan X H, Wang Z Q, Rao M J, et al. Advances in Materials Science and Engineering, 2018, 2018, 13.
15 Skarżyński Ł, Marzec I, Tejchman J. International Journal of Fatigue, 2019, 122, 256.
16 Łukasz Skarżyński, Jan Suchorzewski. Construction and Building Mate-rials, 2018, 183, 283.
17 Kwang Yeom Kim, Tae Sup Yun, Kwang Pil Park. Cement and Concrete Research, 2013, 50, 34.
18 Yu Z W, Tan S, Shan Z, et al. Fatigue & Fracture of Engineering Mate-rials & Structures, 2017, 40, 1960.
19 Gao J, Sha A M, Wang Z J, et al. Construction and Building Materials, 2018, 177, 134.
20 Liu J Z, Ba M F, Du Y G, et al.Construction and Building Materials, 2016, 122, 619.
21 Yao W, Liu H W, Xu Y, et al. Construction and Building Materials, 2017, 136, 139.
22 Shi J J, Ming J, Sun W.American Society of Civil Engineers, 2018, 30(7), 04018131.
23 Carrara P, Kruse R, Bentz D P, et al.Cement and Concrete Composites, 2018, 93, 30.
24 Liu T J, Qin S S, Zou D J, et al. Construction and Building Materials. 2018, 192, 429.
25 Mínguez J, González D C, Vicente M A.Construction and Building Materials, 2018, 168, 906.
26 Vicente M A, Ruiz G, González D C, et al.International Journal of Fatigue, 2018, 114, 138.
27 Mínguez J, Vicente M A, González D C.Construction and Building Materials, 2019, 198, 718.
28 Sun X, Guo S C, Dai Q L, et al.Materials Characterization, 2017, 131, 98.
29 Li Z, Liu L L, Yan S H, et al. Construction and Building Materials, 2019, 207, 190.
30 Bartosz Powierza, Ludwig Stelzner, Tyler Oesch, et al. Journal of Nondestructive Evaluation, 2019, 38, 15.
31 Bernardes E E, Carrasco E V M, Vasconcelos W L, et al. Construction and Building Materials, 2015, 95, 703.
32 Wang Y S, Dai J G.NDT & E International, 2017, 86, 28.
33 Zhu X H, Zhang Z L, Yang K, et al. Cement and Concrete Composites, 2018, 89, 139.
34 Zhou H N, Li H, Abdelhady A, et al. Construction and Building Mate-rials, 2019,212, 130.
35 Zhao Y J, Wang X W, Jiang J W, et al. Construction and Building Materials, 2019, 213,182.
36 Kwang Yeom Kim, Tae Sup Yun, Jinhyun Choo, et al. Construction and Building Materials, 2012, 37, 93.
37 Schock J, Liebl S, Achterhold K, et al. Cement and Concrete Research, 2016, 89, 200.
38 Dong H, Gao P, Ye G. Materials and Structures, 2017, 50, 154.
39 Sang-Yeop Chung, Tong-Seok Han, Se-Yun Kim, et al. Cement and Concrete Composites, 2016, 65, 150.
40 Michael P, Shermaine C, Regina P, et al. Materials, 2016, 9, 388.
41 Sang-Yeop Chung, Mohamed Abd Elrahman, Dietmar Stephan.Energy and Buildings, 2016, 125, 122.
42 Eyad Masad, Aslam Al Omari, Hamn-Ching Chen. Computational Mate-rials Science, 2007, 40, 449.
43 Yu F, Sun D Q, Hu M J, et al. Construction and Building Materials, 2019, 200, 687.
44 Zhang J, Ma G D, Ming R P, et al. Construction and Building Materials, 2018, 161, 468.
45 She W, Du Y, Zhao G T, et al. Construction and Building Materials, 2018, 170, 153.
46 Zeng Q, Lin Z, Zhou C S, et al. Chemical Physics Letters, 2019, 726, 117.
47 Yang L, Gao D Y, Zhang Y S, et al. Royal Society Open Science, 2019, 6, 190112.
48 Zuo Y, Qi B, Gao J M, et al. Advances in Materials Science and Engineering, 2018, 2018, 5.
49 Yuan J, Liu Y, Li H X, et al. Advances in Materials Science and Engineering, 2014, 2014, 11.
50 Chen J X, Zhao P Y, Luo Y B, et al. Journal of Civil Engineering and Management, 2017, 23(5), 583.
51 Cui D, Sun W, Wan K, et al. Journal of Testing and Evaluation, 2017,45,2.
52 Łukasz Sadowski, Damian Stefaniuk. Applied Sciences, 2017, 7, 123.
53 Olawuyi B J, Boshoff W P. Construction and Building Materials, 2017, 135, 580.
54 Sang-Yeop Chung, Mohamed Abd Elrahman, Pawel Sikora, et al. Mate-rials, 2017, 10, 1354.
55 Alireza Kashani, Tuan Duc Ngo, Priyan Mendis, et al. Journal of Cleaner Production, 2017, 149, 925.
56 Fares Bennai, Chady El Hachem, Kamilia Abahri, et al. Construction and Building Materials, 2018, 188, 983.
57 Sun C, Zhu Y, Guo J, et al. Construction and Building Materials, 2018, 186, 833.
58 Pang Xueyu, John Singh, Walmy Cuello Jimenez. Construction and Building Materials, 2018, 167, 243.
59 Li Z J, Wang L, Ma G W. International Journal of Concrete Structures and Materials, 2018, DOI: 10.1186/s40069-018-0269-0.
60 Nathan Bossa, Perrine Chaurand, Jérôme Vicente, et al. Cement and Concrete Research, 2015, 67, 138.
61 Cui D, Nemkumar B,Wang Q N, et al. Construction and Building Mate-rials, 2019, 196, 692.
62 Qian R S, Zhang Y S, Liu C, et al. Materials Characterization, 2018, 145, 277.
63 Rifai H, Staude A, Meinel D, et al. Cement and Concrete Research, 2018, 111, 72.
64 Wei Y, Wu Z H, Yao X F, et al. American Society of Civil Engineers, 2019, 31(8), 04019153.
65 Ilker Tekin, Recep Birgul, Huseyin Yilmaz Aruntas. Construction and Building Materials, 2012, 35, 15.
66 Wang Y S, Dai J G. Construction and Building Materials, 2017, 153, 385.
67 Tian W, Han N. Measurement, 2019, 140, 382.
68 Yuzo Obara, Izumi Tanikura, Jahe Jung, et al. Journal of Advanced Concrete Technology, 2016, 14, 433.
69 Sun W, Hou K P, Yang Z Q, et al. Construction and Building Materials, 2017, 138, 69.
70 Rafal Anay, Vafa Soltangharaei, Lateef Assi, et al. Construction and Building Materials, 2018, 164, 286.
71 Ríos J D, Cifuentes H, Leiva C. Cement and Concrete Research, 2019, 119, 77.
72 Michael Henry, Katsufumi Hashimoto, Ivan Sandi Darma, et al. Journal of Advanced Concrete Technology, 2016, 14, 134.
73 Tian W, Han N. Journal of Advanced Concrete Technology, 2016, 14, 679.
74 Li Y, Li Y Q, Guan Z Z, et al. Construction and Building Materials, 2018, 191, 1201.
75 Liu F, You Z P, Yang X, et al. Construction and Building Materials, 2018, 181, 369.
76 Yang Y G, Zhang Y S, She W, et al. Construction and Building Mate-rials, 2018, 186, 182.
77 Yuan J, Liu Y, Tan Z C, et al. Construction and Building Materials, 2016, 108, 129.
78 Chen F, Gao J M, Qi B, et al. Construction and Building Materials, 2017, 154, 849.
79 Jin Z Q, Zhao X, Zhao T J, et al. International Journal of Electrochemical Science, 2016, 11, 8779.
80 Ebell G, Burkert A, Fischer J, et al. Materials and Corrosion, 2016, 67, 583.
81 Dong B Q, Fang G H, Liu Y Q, et al. Cement and Concrete Research, 2017, 100, 311.
82 Fang G H, Ding W J, Liu Y Q, et al. Construction and Building Mate-rials, 2019, 207, 304.
83 Dong B Q, Shi G Y, Dong P, et al. Cement and Concrete Composites, 2018, 92, 102.
84 Daisuke Fukuda, Yoshitaka Nara, Yuya Kobayashi, et al. Cement and Concrete Research, 2012, 42, 1494.
85 Wang J, Dewanckele J, Cnudde V, et al. Cement & Concrete Composites, 2014, 53, 289.
86 Ruan S Q, Qiu J S, Weng Y W, et al. Cement and Concrete Research, 2019, 115, 176.
87 Lv L, Yang Z, Chen G, et al. Construction and Building Materials, 2016, 105, 487.
88 Lv L Y, Erik Schlangen, Zheng X Y, et al. Materials, 2016, 9, 1025.
89 Fang G H, Liu Y Q, Qin S F, et al. Construction and Building Mate-rials, 2018, 179, 336.