陶瓷/纤维复合装甲抗弹丸侵彻性能的试验与数值模拟研究

doi:10.11896/cldb.20070226

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (15087KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, the anti-penetration performance of boron carbide (B₄C)/carbon fiber (CF)/ultra-high molecular weight polyethylene (UHMWPE) composite armor against 7.62 mm armor piercing incendiary projectile was studied. Through experiment and numerical simulation, the action mechanism of each layer of ceramic composite armor on projectile was studied systematically. The reliability of the simulation method is veri-fied by comparing the test results with the simulation results. On this basis, the numerical simulation of material/thickness of ceramic composite armor was carried out. Alumina (Al₂O₃), silicon carbide (SiC) and boron carbide (B₄C) were used as panels. The energy absorption efficiency of ceramic plates with different thickness was studied. It was found that the optimal bullet-proof property was obtained when the thickness of B₄C ceramic was 10 mm.

Key words： ceramic composite armor armor piercing incendiary anti-penetration performance numerical simulation

Published: 30 September 2021

CLC number:

TB332

Fund:This work was financially supported by the Key Research and Development Program of Shandong Province(2016GGX4303, 2017CXGC0409), Major Project of New and Old Kinetic Energy Conversion in Shandong Province(31370004042010).

About author:: Dongzhe Wang received his bachelor's degree in engineering from Shandong University of Technology in 2018. His research interest is composite numerical si-mulation.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Dongzhe
	QIN Rongman
	SUN Na
	DU Mingyuan
	TENG Linghong
	CAO Weiwei
	ZHU Bo

Cite this article:

WANG Dongzhe,QIN Rongman,SUN Na, et al. Experimental and Numerical Simulation Study on Anti-Projectile Penetration Performance of Ceramic/Fiber Composite Armor[J]. Materials Reports, 2021, 35(18): 18216-18221.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20070226 OR http://www.mater-rep.com/EN/Y2021/V35/I18/18216

1 Zhao Z, Han B, Li F, et al.Ceramics International, 2020, 40(15), 23854.
2 Jiang J, Dong X, Chen M Y, et al. Materials Reports A: Review Papers, 2013, 27(6), 70 (in Chinese).
江洁, 董侠, 陈美玉, 等. 材料导报:综述篇, 2013, 27(6),70.
3 Shokrieh M M, Javadpour G H.Composite Structures, 2008, 82(2), 269.
4 Feli S, Asgari M R.Composites Part B: Engineering, 2011, 42(4), 771.
5 Tasdemirci A, Tunusoglu G, Güden M.International Journal of Impact Engineering, 2012, 44, 1.
6 Grujicic M, Pandurangan B, Entremont B.Materials & Design, 2012, 41, 380.
7 Krishnan K, Sockalingam S, Bansal S, et al.Composites Part B: Engineering, 2010, 41(8), 583.
8 Liu W, Chen Z, Chen Z, et al. Materials & Design, 2015, 87, 421.
9 Grujicic M, Pandurangan B, Zecevic U, et al. Multidiscipline Modeling in Materials and Structures, 2007, 3(3), 287.
10 Chabera P, Boczkowska A, Morka A, et al.Bulletin of the Polish Academy of Sciences Technical Sciences, 2015, 63(2), 363.
11 Medvedovski E.Ceramics International, 2010, 36(7), 2103.
12 Bao K, Zhang X F, Tan M T, et al. Explosion and Shock Waves, 2019, 39(12), 57 (in Chinese).
包阔, 张先锋. 谈梦婷,等. 爆炸与冲击, 2019, 39(12), 57.
13 Hazzard M K, Trask R S, Heisserer U, et al.Composites Part A: Applied Science and Manufacturing, 2018, 115, 31.
14 Johnson G R, Holmquist T J.Journal of Applied Physics, 1999, 85(12), 8060.
15 Liu D, Xiao Y, Jiang X W, et al. Journal of Shanghai University (Natural Science Edition), 2020, 26(2), 234 (in Chinese).
刘迪, 肖依, 江旭伟, 等. 上海大学学报(自然科学版), 2020, 26(2), 234.
16 Yang Z Q, Pang B J, Wang L W, et al. Explosion and Shock Waves, 2010, 30(5), 463 (in Chinese).
杨震琦, 庞宝君, 王立闻, 等. 爆炸与冲击, 2010, 30(5), 463.
17 Johnson G R, Cook W H. Engineering Fracture Mechanics, 1985, 21(1), 31.
18 Sudhir Sastry Y B, Budarapu P R, Krishna Y, et al. Theoretical and Applied Fracture Mechanics, 2014, 72, 2.
19 Xie J, Ma C Y, Huo Y J, et al. Journal of Vibration and Shock, 2018, 37(20), 200 (in Chinese).
解江, 马骢瑶, 霍雨佳, 等. 振动与冲击, 2018, 37(20), 200.
20 Shi Y, Swait T, Soutis C. Composite Structures, 2012, 94(9), 2902.
21 Nie D, Wang S, Xing P F, et al. Ferro-Alloys, 2019, 50(3), 33 (in Chinese).
聂丹, 王帅, 邢鹏飞, 等. 铁合金, 2019, 50(3), 33.