| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Reviews on the Study of Aluminum Alloys and Aluminum Matrix Composites with High-temperature Anti-creep Behavior |
| SUN Ming1, ZHUANG Jingwei2, DENG Hailiang1,*, CHEN Ziyang1, SI Songhua1, ZHANG Ruimin2
|
1 Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials (Anhui Univversity of Technology), Ministry of Education, Ma’anshan 243002, China;
2 Shenzhen Altech Novel Alloy Co., Ltd., Shenzhen 518000, China; |
|
|
|
Abstract Creep phenomenon is easily generated at high temperatures for aluminum alloys used as structural and conductor materials, which is further deteriorated with an increase of working time. Structural damage of aluminum alloys is even caused by creep, leading to a catastrophic fai-lure. Therefore, efficient improvement in the creep resistance is crucial for aluminum alloys applied in the environments with high temperatures and loads to keep their excellent properties. So far, rare earth treatment, alloying treatment, and adding of reinforcement are the methods to improve the creep resistance of aluminum alloys. The purpose is to refine alloy grains and precipitate high thermal-stability phases that are dispersed in the interior of grains and in grain boundaries. The mechanisms include fine grain strengthening, precipitation hardening, dispersion strengthening, and direct strengthening. These strengthening effects inhibit the glide of dislocations formed in crystal grains and sliding of crystal boundaries, resulting in an evident decrease of steady-state creep rate thereby improving the creep resistance. Others studies have focused on establishing the relatio-nal models between the creep properties and the creep conditions, microstructure and precipitates of aluminum alloys to predict the creep behavior and service life. The models can provide theoretical data which are favorable to the design of aluminum alloys and aluminum matrix composites showing excellent creep resistance at high temperatures.
This paper analyzes the creep behavior of aluminum alloys firstly. Focusing on the high-temperature creep mechanisms such as diffusion creep, grain boundary slip, and dislocation creep, the research progresses of anti-creep aluminum alloys and aluminum matrix composites are summarized according to the items of rare earth micro-alloying, multielement micro-alloying, and composite strengthening, etc. The improving mechanisms on high-temperature creep properties are simultaneously revealed. The studies on the establishment of creep theoretical models and prediction of creep life are also reviewed. The challenges and developments of anti-creep aluminum alloys and aluminum matrix composites are finally proposed basing on the above reviews.
|
|
Published: 25 June 2021
|
|
|
| Fund:This work was financially supported by the National Natural Science Foundation of China (51972002) and Equipment Advanced Research Foundation of China (JZX7Y20190262004901). |
| About author:: Ming Sun received her B.E. degree in materials science and engineering from Hebei University of Engineering in 2018. She is currently pursuing her master’s degree at School of Materials Science & Engineering, Anhui University of Technology under the supervision of Prof. Hailiang Deng. Her research has focused on aluminum matrix composites.Hailiang Deng received his Ph.D. degree in materials science from Northwestern Polytechnical University in 2012. His researches were focused on ultra-high tempe-rature composites and aerospace applications at Xi’an Aerospace Composite Research Institute from 2012 to 2017. He is currently a full professor in Anhui University of Technology. His research interest is advanced composites, including ceramic matrix, carbon matrix, and aluminum matrix composites. |
|
|
| 1 |
Zhang S Q, Zhang Y C, Chen M, et al. Applied Mathematics and Mechanics,2018,39(7),967.
|
| 2 |
Liu X Y, Zhao X C, Yang X R, et al. Chinese Journal of Rare Metals,2016,40(12),1282(in Chinese).
|
|
刘晓燕,赵西成,杨西荣,等.稀有金属,2016,40(12),1282.
|
| 3 |
Wen X, Liao H M, Zeng M. Transactions of Materials and Heat Treatment,2014,35(11),97(in Chinese).
|
|
魏鑫,廖慧敏,曾明.材料热处理学报,2014,35(11),97.
|
| 4 |
Lin Y C, Liu G, Chen M S, et al. Materials and Design,2015,79,127.
|
| 5 |
Jiang X Y, Zhang Y, Yi D Q, et al. Materials Characterization,2017,130,181.
|
| 6 |
Milligan B K, Roy S, Hawkins C S, et al. Materials Science and Engineering A,2020,772,138697.
|
| 7 |
Chao Z L, Zhang L C, Jiang L T, et al. Journal of Alloys and Compounds,2019,775,290.
|
| 8 |
Wei D, Yang K, Zhang P, et al. Journal of Materials Engineering and Performance,2019,28(6),3614.
|
| 9 |
Yang C, Cao L F, Gao Y H, et al. Materials and Design,2020,186,108309.
|
| 10 |
Spigarelli S, Sandstrom R. Materials Science and Engineering A,2018,711,343.
|
| 11 |
Sun R, Qing Y, Zhuang J W, et al. Light Alloy Fabrication Technology,2019,47(2),13(in Chinese).
|
|
孙睿,庆毅,庄景巍,等.轻合金加工技术,2019,47(2),13.
|
| 12 |
Christopher B M, Seidman D N, Dunand D C. Acta Materialia,2012,60(8),3643.
|
| 13 |
Ravindran S, Mani D N, Balaji S, et al. Materials Today: Proceedings,2019,16,1020.
|
| 14 |
Nami B, MiresmaeiliI S M, Jamshidi F, et al. Transactions of Nonferrous Metals Society of China,2019,29,2056.
|
| 15 |
PaninaV E, Surikova N S, Elsukova T F, et al. Materials Science and Engineering A,2018,733,276.
|
| 16 |
Zhang J Y, Wang B, Wang H, et al. Materials Characterization,2020,159,110024.
|
| 17 |
Dar S M, Liao H C. Materials Science and Engineering A,2019,763,138062.
|
| 18 |
Lin Q Q,Wang J H. Special Casting and Nonferrous Alloys,2005,25(6),381(in Chinese).
|
|
林启权,王建华.特种铸造及有色合金,2005,25(6),381.
|
| 19 |
Gao Y H, Cao L F, Yang C. Materials Today Nano,2019,6,1.
|
| 20 |
Rao K S, Raju P N, Reddy G M, et al. Materials Science and Technology,2009,25(1),92.
|
| 21 |
Zupanic F, Gspanb C, Burja J, et al. Materials Today Communications,2020,22,100809.
|
| 22 |
Yue S, Deng X B, Zhang J X, et al. Transactions of Materials and Heat Treatment,2017,38(9),36(in Chinese).
|
|
岳嵩,邓显波,张嘉艺,等.材料热处理学报,2017,38(9),36.
|
| 23 |
Starink M J, Gao N, Kamp N, et al. Materials Science and Engineering A,2006,418(1?2),241.
|
| 24 |
Chen Z G, Yang W L, Wang S Y, et al. Rare Metal Materials and Engineering,2010,39(8),1499(in Chinese).
|
|
陈志国,杨文玲,王诗勇,等.稀有金属材料与工程,2010,39(8),1499.
|
| 25 |
Wen S P, Xing Z B, Huang H, et al. Materials Science and Engineering A,2009,516(1?2),42.
|
| 26 |
Zhang J X, Gao A H. Hot Working Technology,2012,41(2),58(in Chinese).
|
|
张建新,高爱华.热加工工艺,2012,41(2),58.
|
| 27 |
Wang W T, Zhang X M, Gao Z G, et al. Journal of Alloys and Compounds,2010,491(1?2),366.
|
| 28 |
Jaukovic N, Asanovic V, Radovic Z. High Temperature Materials and Processes,2011,30,599.
|
| 29 |
Bai Z, Qiu F, Wu X, et al. Materials Characterization,2013,86,185.
|
| 30 |
Farkoosh A R, Pekguleryuz M. Materials Science and Engineering A,2013,582,248.
|
| 31 |
Li G F, Zhang X M, Zhu H F, Journal of Aeronautical Materials,2010,30(6),1(in Chinese).
|
|
李国锋,张新明,朱航飞.航空材料学报,2010,30(6),1.
|
| 32 |
Luca A D, Dunand D C. Acta Materialia,2018,144,80.
|
| 33 |
Nhon Q V, David N. Materials Science and Engineering A,2018,734,27.
|
| 34 |
Li Z, Zhang Z. Materials Science and Engineering A,2018,729,196.
|
| 35 |
Knipling K E, Karnesky R A, Lee C P, et al. Acta Materialia,2010,58(15),5184.
|
| 36 |
Zhang X D, Wang S Q. Acta Metallurgica Sinica,2013,29(4),501(in Chinese).
|
|
张旭东,王绍青.金属学报,2013,29(4),501.
|
| 37 |
Wang G J, Xiong B Q, Zhang Y A, et al. Rare Metals,2011,30(3),310.
|
| 38 |
Rutecka A, Kowalewski Z L, Pietrzak K, et al. Procedia Engineering,2011,10,1420.
|
| 39 |
Sharmilee Pal, Ray K K, Mitra R. Materials Science and Engineering A,2010,527(26),6831.
|
| 40 |
Huang M H, Wang H W, Li X F, et al. Rare Metal Materials And Engineering,2005,34(9),1394.
|
| 41 |
Ji F, Ma M Z, Song A J, et al. Materials Science and Engineering A,2009,506(1?2),58.
|
| 42 |
Tian W S, Zhao Q L, Geng R, et al. Materials Science and Engineering A,2018,713,190.
|
| 43 |
Liu X R, Guo Y C, Xia F, et al. Hot Working Technology,2019,48(8),123(in Chinese).
|
|
刘晓蓉,郭永春,夏峰,等.热加工工艺,2019,48(8),123.
|
| 44 |
Zuo D Q, Ma G L, Deng Z H, et al. Chinese Journal of Applied Mecha?nics,2018,35(4),894(in Chinese).
|
|
左都全,马国玲,邓正华,等.应用力学学报,2018,35(4),894.
|
| 45 |
Lin Y C, Xia Y C, Chen M S, et al. Computational Materials Science,2013,67,243.
|
| 46 |
Lin Y C, Jiang Y Q, Zhou H M, et al. Journal of Materials Engineering and Performance,2014,23(12),4350.
|
| 47 |
Shivakumar S P, Sharan A S, Sadashivappa K. Materials Science and Engineering A,2018,310,12.
|
| 48 |
Deng Y L, Zhang S, Wang Y, et al. Hot Working Technology,2018,47(10),1(in Chinese).
|
|
邓运来,张书,王宇,等.热加工工艺,2018,47(10),1.
|
| 49 |
Lv F G, Huang X, Zeng Y S, et al. Materials Science and Technology,2014(3),28(in Chinese).
|
|
吕凤工,黄遐,曾元松,等.材料科学与工艺,2014(3),28.
|
| 50 |
Li L T, Lin Y C, Zhou H M, et al. Computational Materials Science,2013,73(6),72.
|
| 51 |
Zhang J, Deng Y, Zhang X. Materials Science and Engineering A,2013,563,8.
|
| 52 |
Li C, Wu X D, Huang L. Materials Science and Engineering A,2010,527,3623.
|
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2021, Vol. 35 
