METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Influence of Surface Functionalization on Properties of Carbon Microspheres Reinforced Magnesium Composites |
JIN Lin1,2, YANG Yongzhen2, FAN Jianfeng2, XU Bingshe2
|
1 College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China 2 Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China |
|
|
Abstract The enhanced mechanical properties are influenced by interfacial bonds between carbon nano-material reinforcement and magnesium matrix immediately. Surface functionalization of reinforcement by chemical modification could improve the interface bonds effectively. For research the role of surface functionalization in improving properties of composites deeply, the carbon microspheres (CMSs) which prepared by chemical vapor deposition method (CVD-CMSs) and prepared by hydrothermal method (HT-CMSs) were used as reinforcements in this work. Firstly, one-step modification was used to functionalize the reinforcements respectively, and then the magnesium matrix composites CVD-CMSs/Mg and HT-CMSs/Mg were prepared by spark plasma sintering and hot extrusion. The effect of oxygen functional groups which grafted on CMSs by chemical modification was investigated. Secondly, the HT-CMSs reinforcements were functionalized by two-step modification, after that, the magnesium matrix composites HT-CMSs@MgO/Mg were prepared. The impact of MgO nanoparticles coated on HT-CMSs was investigated by compared with HT-CMSs/Mg. Interface structure and mechanical properties of the samples were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, optical micrographs, high-resolution transmission electron microscopy and tensile testing. The results show that oxygen functional groups of carbon microspheres have positive effects on the surface functionalization and dispersion of reinforcing phase. The MgO films, produced between reinforcement and matrix during their fabrication after one-step modification, are effectively promoting the interface compatibility of two phases. MgO nanoparticles coated on the surface of HT-CMSs by CVD play a bridge role between carbon microspheres and matrix, which is beneficial to increase the thickness of MgO films and improve the tensile property of composites.
|
Published: 10 May 2021
|
|
Fund:National Natural Science Foundation of China(U1710118,U1810122), Natural Science Foundation of Shanxi (201801D221139). |
About author:: Lin Jin, lecturer of Taiyuan University of Technology, doctorate student of Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of Education. Her main research interest is nanocarbon/metal composites. Bingshe Xu, professor of Taiyuan University of Technology,doctorate student supervisor, He is the director National-Local Joint Semiconductor Lighting Enginee-ring Research Center and Collaborative Innovation Center for Advanced Thin Film Photoelectric Materials and Devices. He received his Ph.D. from Tokyo University in 1994. He mainly engaged in the preparation of GaN and GaAs based semiconductor materials and devices, as well as nano functional materials and the correlation between structure and performance. |
|
|
1 Lan J, Yang Y, Li X C. Materials Science and Engineering A,2004,386,284. 2 Cao G, Kobliska J, Konishi H, et al. Metallurgical and Materials Transactions A,2008,39(4),880. 3 Cao G, Konishi H, Li X. Materials Science and Engineering A,2008,486,357. 4 Xu B, Chen P. New Carbon Materials,1996,11(3),4(in Chinese). 许斌,陈鹏.新型炭材料,1996,11(3),4. 5 Wang Y G, Korai Y, Mochida I. Carbon,1999,37(7),1049. 6 Li Q Q, Viereckl A, Rottmair C A, et al. Composites Science and Technology,2009,69,1193. 7 Kondoh K, Threrujirapapong T, Imai H, et al. Composites Science and Technology,2009,69,1077. 8 Bradbury C R, Gomon J K, Kollo L, et al. Journal of Alloys and Compounds,2014,585,362. 9 Huang W, Lin Y, Taylor S, et al. Nano Letters,2002,2,231. 10 So K P, Jeong J C, Park J G, et al. Composites Science and Technology,2013,74,6. 11 Park Y, Cho K, Park I. Procedia Engineering,2011,10,1446. 12 Maqbool A, Hussain M A, Khalid F A, et al. Materials Characterization,2013,86,39. 13 Chen B, Yang J, Zhang Q, et al. Materials & Design,2015,75,24. 14 Yang Y Z, Liu X G, Zhan C Y, et al. Journal of Physics and Chemistry of Solids,2010,71(3),235. 15 Zhao H J, Yang Y Z, Liu X G, et al. China Sciencepaper,2012,7(12),898(in Chinese). 赵慧君,杨永珍,刘旭光,等.中国科技论文,2012,7(12),898. 16 Sevlla M, Fuertes A B. Chemistry,2009,15(16),4195. 17 Zhao H J, Yang Y Z, Liu X G, et al. China Sciencepaper,2012,7(12),898. 18 Serp P, Feurer R, Kalck P, et al. Carbon,2001,39(4),621. 19 Yang Y Z, Liu X G, Guo X M, et al. Journal of Nanoparticle Research,2011,13(5),1979. 20 Jin L, Liu X G, Yang Y Z, et al. Materials Reports B: Research Papers,2010,24(8),21(in Chinese). 金琳,刘旭光,杨永珍,等.材料导报:研究篇,2010,24(8),21. 21 Xu B S, Luo Q P, Yang Y Z. Materials China,2009,28(2),35(in Chinese). 许并社,罗秋苹,杨永珍.中国材料进展,2009,28(2),35. 22 Jin Y Z, Gao C, Hsu W K, et al. Carbon,2005,43(9),1944. 23 Jin L. Study on the preparation and electrochemical properties of Ru/CMSs composites. Master's Thesis,Taiyuan University of Technology, China,2010(in Chinese). 金琳.钌/碳微球复合材料的制备及电化学性能研究.硕士学位论文,太原理工大学,2010. 24 Chang S Y, Lee S W, Kang K M, et al. Materials Transactions,2004,45,488. 25 Ryou J, Hong S. Current Applied Physics,2013,13,327. 26 Yuan Q H, Zeng X S, Liu Y, et al. Carbon,2016,96,843. 27 Jerng S K, Lee J H, Yu D S, et al. The Journal of Physical Chemistry C,2012,116,7380. 28 Zhang D, Zhan Z. Journal of Alloys and Compounds,2016,658,663. 29 Yuan Q H. Preparation and mechanical properties of AZ91 alloy compo-sites reinforced with nano-carbon materials. Master's Thesis, Nachang University, China,2016(in Chinese). 袁秋红.纳米碳材料增强AZ91镁基复合材料制备与性能研究.硕士学位论文,南昌大学,2016. 30 Katsuyoshi K, Hiroyuki F, Junko U, et al. Materials Science and Engineering: A,2010,7(527),4103. 31 Luster J W, Thumann M, Baumann R. Materials Science and Technology,1993,9(10),853. |
|
|
|