复合材料钻孔缺陷超声检测技术研究进展

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7197KB)
Export: BibTeX | EndNote (RIS)

Abstract Mechanical drilling is an important manufacturing process to realize the connection between the structural parts of composite materials. The anisotropy of composite materials and the low connection strength between the layers could result in drilling-induced defects such as tea-ring, burr and delamination, which seriously affect the reliability of the connection. Ultrasonic testing technology is the most popular nondestructive technology for detecting the defect in composite materials. This paper first describes the formation mechanism of drilling-induced defects, and then focuses on recent advances of ultrasonic testing techniques in defects detection of composite materials, including the conventional ultrasonic testing, phased array ultrasonic testing, laser ultrasonic testing and scanning acoustic microscope testing. Finally, the challenges of ultrasonic testing technology of drilling-induced defects detection for composite materials are discussed.

Key words： composite material drilling-induced defect defect detection ultrasonic nondestructive testing technology

Published: 08 January 2021

CLC number:	V254.2
	TB553

About author:: Fan Li received his B.E. degree in Mechanical Engineering from Central South University (CSU) in 2019. He is currently pursuing his master's degree at the School of Mechanical Engineering, Shanghai Jiao Tong University. His research has focused on the automatic ultrasonic nondestructive testing of composite materials. Yang Zhang received the B.E. and Ph.D. degrees in Mechanical Engineering from Zhejiang University, Hangzhou, China, in 2007 and 2012, respectively. From 2013 to 2018, he held a post-doctoral position with the Hong Kong University of Science and Technology. He is currently an assistant professor with Shanghai Jiao Tong University, Shanghai, China. His current research interests include multi-axis inspection, robot-aided manufacturing and ultrasonic non-destructive inspection technology.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Fan
	ZHANG Yang
	ZHU Limin

Cite this article:

LI Fan,ZHANG Yang,ZHU Limin. Survey of Research Progress on Ultrasonic Nondestructive Testing of Drilling-Induced Defects in Composite Materials[J]. Materials Reports, 2020, 34(Z2): 528-533.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2020/V34/IZ2/528

1 付饶. CFRP低损伤钻削制孔关键技术研究. 博士学位论文, 大连理工大学, 2017.
2 Caggiano A, Nele L. Machining Science and Technology, 2018, 22 (5), 865.
3 Zhang X S, Chen Y J, Hu J L. Progress in Aerospace Sciences, 2018, 97, 22.
4 温姣玲. 航空复合材料层压板钻孔分层缺陷相控阵检测方法研究. 硕士学位论文, 南昌航空大学, 2017.
5 Tsao C C, Hocheng H, Chen Y C. CIRP Annals-Manufacturing Technology, 2012, 61(1), 91.
6 M'Saoubi R, Axinte D, Soo S L, et al. CIRP Annals-Manufacturing Technology, 2015, 64(2), 557.
7 Cruz C E D, De Aguiar P R, Machado A R, et al. International Journal of Advanced Manufacturing Technology, 2013, 66(1-4), 151.
8 Caminero M A, Garcia-Moreno I, Rodriguez G P, et al. Composites Part B: Engineering, 2019, 165, 131.
9 Ibrahim M E, Smith R A, Wang C H. NDT & E International, 2017, 92, 111.
10 Dilonardo E, Nacucchi M, De Pascalis F, et al. Composites Science and Technology, 2020,192, 108093.
11 邢贺民. 复合材料与液体组份的微波检测技术研究. 硕士学位论文, 太原理工大学, 2013.
12 胡金花, 李勇, 谭建国, 等. 传感器与微系统, 2020, 39(3), 113.
13 Han D H, Kang L H. Composite Structures, 2018, 185, 161.
14 Wu D T, Haude C, Burger R, et al. Infrared Physics & Technology, 2019, 102, 102995.
15 程军, 杨继全, 裘进浩, 等. 复合材料学报, 2018, 35(8), 2074.
16 南方, 肖鹏. 航空制造技术, 2019, 62(14), 83.
17 Shrestha R, Kim W. Infrared Physics & Technology, 2018, 94, 78.
18 张旭辉, 马宏伟. 机械制造, 2002, 40(455), 24.
19 刘松平, 刘菲菲, 李乐刚, 等. 航空制造技术, 2019, 62(14), 14.
20 张厚江, 陈五一, 陈鼎昌. 机械工程学报, 2004(7), 150.
21 Davim J P, Rubio J C, Abrao A M. Composites Science and Technology, 2007,67 (9), 1939.
22 Liu D F, Tang Y J, Cong W L. Composite Structures, 2012, 94(4), 1265.
23 Hocheng H, Tsao C C. Journal of Materials Processing Technology, 2005, 167(2-3), 251.
24 Lloyd P A. Ultrasonics, 1989, 27 (1), 8.
25 Scarponi C, Briotti G. Composites Part B: Engineering, 2000, 31(3), 237.
26 Hasiotis T, Badogiannis E, Tsouvalis N G. Strojniski Vestnik/Journal of Mechanical Engineering, 2011, 57 (3), 192.
27 宋瑶, 王园. 第六届中国航空学会青年科技论坛. 沈阳, 2014, pp. 740.
28 Hocheng H, Tsao C C. Key Engineering Materials, 2007, 339, 16.
29 Tsao C C, Hocheng H. International Journal of Machine Tools and Manufacture, 2005, 45 (11), 1282.
30 Drinkwater B W, Wilcox P D. NDT & E International, 2006, 39(7), 525.
31 左延田, 方雨, 刘晴岩, 等. 无损检测, 2016, 38(6), 6.
32 温姣玲, 卢超, 何方成, 等. 玻璃钢/复合材料, 2017 (2), 21.
33 张海兵, 杜百强. 无损检测, 2020, 42(4), 46.
34 周正干, 李洋, 周文彬. 机械工程学报, 2016, 52(6), 1.
35 Holmes C, Drinkwater B W, Wilcox P D. NDT & E International, 2005, 38(8), 701.
36 Jun H, Li C. In: 5th International Conference on Information Science and Control Engineering (ICISCE). New York, 2018, pp. 879.
37 Li C, Pain D, Wilcox P D, et al. NDT＆E International, 2013, 53, 8.
38 Ariasi I, Achenbach J D. Wave Motion, 2004, 39(1), 61.
39 周正干, 孙广开, 李征, 等. 哈尔滨理工大学学报, 2012, 17(6), 119.
40 周正干, 孙广开, 李征, 等. 机械工程学报, 2013, 49(22), 29.
41 Sun G K, Zhou Z G. Optik, 2014, 125 (14), 3608.
42 Zhou Z G, Sun G K, Chen X C, et al. Applied Optics, 2014, 53(12), 2656.
43 Zhou Z G, Sun G K, Chen X C, et al. Applied Optics, 2013, 52 (26), 6481.
44 朱鹏昊. 2017中国西部声学学术交流会. 呼和浩特, 2017, pp. 193.
45 李圣贤, 朱永凯, 王海涛, 等. 无损检测, 2019, 41(5), 1.
46 张厚江, 陈五一, 陈鼎昌. 复合材料学报,1998(3), 63.
47 魏莹莹, 安庆龙, 蔡晓江, 等. 航空学报, 2016, 37(11), 3512.
48 Xu J Y, Li C, Mi S P, et al. Composite Structures, 2018, 201, 1076.
49 Li C, Xu J Y, Chen M. AIP Conference Proceedings, 2018, 1960(1), 070017.
50 Kumar D, Singh K K. Journal of Materials: Design and Applications, 2019,233 (4), 647.
51 Kumar D, Singh K K, Zitoune R. Journal of Engineering Manufacture, 2018, 232 (14), 2533.