铝合金腐蚀防护技术研究现状及发展趋势

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4516KB)
Export: BibTeX | EndNote (RIS)

Abstract Aluminum alloy has high specific strength, low density, low melting point, excellent machining performance and excellent corrosion resis-tance. It is now used as the second largest metal after steel. However, the corrosion of aluminum alloy causes huge economic loss every year, which limits the further application and development of aluminum alloy. Through the surface engineering technology of coating corrosion resistant film on aluminum alloy surface, the corrosion resistance of aluminum alloy surface can be further improved and its value can be realized more fully. In this paper, the methods of anodic oxidation, chemical oxidation, micro-arc oxidation, rare earth conversion film, electroplating, spraying, laser cladding and nano coating for the corrosion resistance of aluminum alloy surface are reviewed.

Key words： aluminum alloy surface treatment process coating corrosion resistance

Published: 08 January 2021

CLC number:

TG17

Fund:This work was financially supported by National Key R&D Program of China (2018YFB1105800), Key Laboratory of Vibration and Control of Aero-Propulsion System Ministry of Education, Northeastern University (VCAME201706).

About author:: Guang Liang, master degree of material science and engineering in Army Armored Force Academy. The research direction is material surface protection. Zhiqiang Ren, is an assistant researcher at the Key Laboratory of Equipment Remanufacturing Technology for National Defense Science and Technology. His research interest is surface engineering.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIANG Guang
	ZHU Sheng
	WANG Wenyu
	WANG Xiaoming
	HAN Guofeng
	REN Zhiqiang

Cite this article:

LIANG Guang,ZHU Sheng,WANG Wenyu, et al. Research Status and Development Trend of Aluminum Alloy Anticorrosion Technology[J]. Materials Reports, 2020, 34(Z2): 429-436.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2020/V34/IZ2/429

1 钟掘.轻合金加工技术 ,2002, 30(5), 1.
2 叶浩. 2024铝合金的熔铸及形变热处理工艺研究.硕士学位论文,湖南大学, 2012.
3 白志玲.科技广场, 2015(12), 18.
4 韩孝强. 航空铝合金表面复合涂层的制备与防腐性能研究. 硕士学位论文, 中国民用航空飞行学院, 2018.
5 邹泽昌, 谢祖华, 陈忠士, 等. 机电技术, 2012, 35(4), 117.
6 盛永清, 吴志鹏, 赵安安.轻合金加工技术, 2019, 47(12), 46.
7 陈晶, 成阳, 陈东琛, 等.江西化工, 2019(4), 44.
8 孙衍乐, 宣天鹏, 徐少楠, 等. 电镀与精饰, 2010, 32(4), 18.
9 Leontiev A P, Roslyakov I V, Napolskii K S.Electrochimica Acta, 2019, 319, 986.
10 吴小良, 赵云.材料保护, 2019, 52(2), 45.
11 杨英硕. NaAlO₂封孔对2024铝合金阳极氧化膜耐腐蚀性的影响. 硕士学位论文, 南京邮电大学, 2019.
12 王荣.化工管理, 2016, 15(15), 87.
13 Elabar D, Monica G R L, Santamaria M, et al. Surface & Coatings Technology, 2017, 309, 256.
14 Ding Z, Smith B A, Hebert R R, et al. Surface & Coatings Technology 2018, 350, 320
15 郝爱文, 黄丽清, 程龙, 等. 无机材料学报, 2014, 29(6), 645.
16 张修庆, 赵祖欣, 叶以富.腐蚀与防护, 2010, 31(8), 619.
17 黄燕滨, 仪忠源, 卢天虎, 等. 电镀与涂饰, 2014, 33(16), 681.
18 张泽磊, 苗景国, 翟大军, 等. 材料保护, 2018, 51(9), 80.
19 柳东, 王浩程, 孙荣禄.表面技术, 2007(5), 75.
20 朱子新, 杜则裕, 徐滨士.兵器材料科学与工程, 2001(4),65.
21 肖金涛, 陈妍, 邢明秀等.中国腐蚀与防护学报, 2019, 39(5), 431.
22 曾祥勇, 旷亚非, 曾凌三.材料保护,1998(12), 49.
23 Torrescano-Alvarez J M, Curioni M,Zhou X,Surface and Interface Analysis,2019, 51, 12.
24 卢新华.化工管理, 2018(11), 64.
25 杨胜奇.材料保护, 2008(9), 72.
26 杨燕, 彭涛, 王大为,等.电镀与环保, 2007(5), 31.
27 王沙沙, 杨浪, 肖葵, 等.工程科学学报, 2018, 40(7), 833.
28 Du N, Wang S X, Zhao Q, et al. Transactions of Nonferrous Metals Society of China, 2012,22(7),1655.
29 刘松良, 王金权.沈阳航空航天大学学报, 2015, 32(1), 61.
30 骆晨, Albu S P, 孙志华, 等. 材料工程, 2016, 44(9), 8.
31 朱祖芳.材料保护, 1997(9), 28.
32 郭鹤桐, 王为.材料保护, 2000(1), 43.
33 梁广,王艳芝.材料保护, 2001(9), 22.
34 陈建清, 赵新灿.热加工工艺, 2020, 49(4), 96.
35 边培莹, 戴君.机械工程材料, 2016, 40(6), 102.
36 张玉林, 于佩航, 韦银河.材料热处理学报, 2017, 38(8), 103.
37 颜鹏, 厉新明, 何林波,等.航空材料学报, 2017, 37(2), 13.
38 谭茂林, 韩新罡, 魏刚.热加工工艺, 2018, 47(16), 144.
39 方北龙. 表面技术, 2006(2), 51.
40 陈道琪, 范洪远, 陈志文.表面技术, 2007(3), 58.
41 李凌杰, 雷惊雷, 李荻.中国稀土学报, 2007 (1), 64.
42 郭红霞.电镀与涂饰, 2003(4), 17.
43 旷亚非, 许岩, 李国希.电镀与精饰, 2000(1) 16.
44 易俊兰, 刘明辉, 陈洁.腐蚀与防护, 2012, 33(10), 884.
45 陈东初, 李文芳, 龚伟慧.中国有色金属学报, 2008(10), 1839.
46 Campestrini P, Terryn H, Hovestad A, et al. Surface & Coatings Technology, 2004, 176(3), 35.
47 Smit M A, Sykes J M, Hunter J A, et al. Surface Engineering, 1999, 15(5), 20.
48 邹洪庆.材料保护, 2001(2), 29.
49 Fedrizzi L, Deflorian F, Bonora P L. Electrochimica Acta, 1997, 42(6), 969
50 Chidambaram D, Clayton C R, Halada G P. Electrochimica Acta, 2005, 51(14), 2682.
51 Smit M A, Hunter J A, Sharman J D B, et al. Corrosion Science, 2003, 45(9), 1903.
52 Cerezo J, Vandendael I, Posner R, et al. Surface & Coatings Technology, 2013, 236, 284.
53 Adhikari S, Unocic K A, Zhai Y, et al. Electrochimica Acta, 2010, 56(4), 1912.
54 李红玲, 刘清玲.表面技术, 2013, 42(3), 42.
55 Valdez B, Kiyota S, Stoytcheva M, et al. Corrosion Science, 2014, 87, 141.
56 Zhao D,Song J.Journal of Rare Earths, 2010, 28(S1), 371.
57 于兴文, 曹楚南, 林海潮.材料研究学报, 2000, (3), 289.
58 李国强, 李荻, 李久青.材料工程, 2001 (4), 6.
59 陆峰, van Ooij W J. 材料工程, 1999(8), 18.
60 秦文峰, 韩孝强.科学技术与工程, 2018, 18(18), 156.
61 李春玲, 张伟娜, 李红玲.材料保护, 2018, 51(6), 15.
62 周洋, 伏文, 牛运峰.涂料工业, 2020, 50(1), 20.
63 章艳玲, 马国扬, 李红玲.材料保护, 2019, 52(9), 153.
64 贾丰春, 马国扬, 李红玲. 材料保护, 2018, 51(9), 70.
65 Coloma P S, Izagirre U, Belaustegi Y, et al. Applied Surface Science, 2015, 345, 24.
66 迟晓平, 李华为, 路云舒.辽宁化工, 2014, 43(10), 1233.
67 Stojadinovic S, Vasilic R, Belca I. Corrosion Science, 2010,52(10), 3258.
68 秦文峰, 范宇航, 符佳伟, 等.电镀与涂饰, 2019, 38(17), 928.
69 穆松林, 张明康, 李文芳, 等. 电镀与涂饰, 2016, 35(24), 1301.
70 Monteiro F J, Barbosa M A, Gabe D R. Electroplating and Environmental Protection, 1988, 35(3-4), 78.
71 梁腾平, 高家诚. 2007高技术新材料产业发展研讨会暨《材料导报》编委会年会. 成都, 2007, pp. 3.
72 Huang X M, Yang Z, Li Y J. Electroplating and Environmental Protection, 2016,36(4), 9.
73 Ge Q F, Wu J X, Zhou L R.Electroplating and Environmental Protection, 2017,37(1), 23.
74 曾善海. 铝合金电镀锡层厚度控制方法及应用研究. 硕士学位论文, 苏州大学, 2016.
75 谷喜秀.河南科技, 2015(24), 134.
76 李国斌, 彭荣华, 马淞江.电镀与精饰, 2003 (2), 24.
77 李宁, 黎德育, 袁国伟. 2001年全国电子电镀年会. 苏州, 2001, pp. 4.
78 Henley V F. Thermal Spraying Technology, 2013, 9(1), 345.
79 李行志, 胡树兵.湖北汽车工业学院学报, 2004(2), 35.
80 黄丰, 聂铭, 周文浩.稀有金属材料与工程, 2019, 48(8), 2689.
81 吴艳鹏, 魏剑辉, Gerald O J. 表面技术, 2019, 48(6), 322.
82 郭晓亮.材料导报, 2017, 31(6), 45.
83 李冬生.铝镁通讯, 2019(1), 12.
84 王汉功, 查柏林. 2006年中国西安热喷涂在工业中应用技术交流研讨会. 西安, 2006, pp. 3.
85 刘荣祥, 周立文, 杨玉杰.表面技术, 2011, 40(1), 14.
86 李平.材料工程, 2006(8), 12.
87 李平.表面技术, 2002, 31(6), 20.
88 王真.材料保护, 2008, 41(7), 61.
89 徐荣正.焊接学报, 2008, 42(6), 109.
90 Li C J, Li W Y. Surface & Coatings Technology, 2003, 162(1), 31.
91 王延东.表面技术, 2010, 39(2), 96.
92 Wielage B, Wank A, Pokhmurska H, et al. Surface & Coatings Technology, 2006, 201(5), 2032.
93 Bao J F, Cui Y.Thermal Spraying Technology, 2011, 3(4), 18.
94 Toma F L, Bertrand G, Chwa S O, et al. Materials Science & Enginee-ring A, 2005, 417(1), 56.
95 付耀耀, 李华.热喷涂技术, 2019, 11(1), 1.
96 杨佳晖, 牟治国, 陈利刚.机械工程与自动化, 2019 (1), 136.
97 毛杰.材料保护, 2013, 46(8), 24.
98 王江慧.金属热处理, 2019, 44(5), 193.
99 严细锋, 王海滨, 仇庆凡, 等. 表面技术, 2019, 48(4), 48.
100 程正明, 邓春明, 林秋生, 等. 热喷涂技术, 2013, 5(4), 17.
101 陈建强.稀有金属, 2011, 35(6), 835.
102 陈建强.材料研究与应用, 2010, 4(4), 538.
103 陈建强.金属热处理, 2018, 43(1), 204.
104 吴增荣, 胡永俊, 代明江, 等.表面技术, 2020, 49(1), 318.
105 Irissou E, Legoux J G, Arsenault B, et al.Journal of Thermal Spray Technology, 2007, 16(5-6), 661.
106 Koivuluoto H, Honkanen M, Vuoristo P. Surface & Coatings Technology, 2010, 204(15), 2353.
107 冯力, 关畅, 畅继荣.热加工工艺, 2020 (6), 94.
108 曹聪聪,李文亚,杨康,等. 材料导报:研究篇, 2019, 33(1),277.
109 Majumdar J D, Chandra B R, Mordike B L, et al. Surface & Coatings Technology, 2004, 179(2), 1186.
110 郭伟, 徐庆鸿, 田锡唐.宇航材料工艺, 1998(2), 33.
111 张鹏飞. 7075铝合金表面激光熔覆Ti/TiBCN涂层的组织与性能研究. 硕士学位论文, 中北大学, 2018.
112 张鹏飞, 李玉新, 李亮.中国表面工程, 2018, 31(2), 159.
113 Li Y X, Zhang P F, Bai P K, et al. Materials, 2018, 11(9), 1551.
114 华俊伟, 余敏, 吴影, 等. 热加工工艺, 2019, 48(10), 152.
115 傅耀坤, 王成磊, 郑英, 等. 桂林电子科技大学学报, 2019, 39(3), 236.
116 王秀华, 孙红霞, 刘守华.材料保护, 2008(7), 42.
117 慕仙莲, 解鹏飞, 金涛, 等. 装备环境工程, 2020, 17(1), 130.
118 慕仙莲, 胡杨, 金涛, 等.装备环境工程, 2019, 16(5), 49.