METALS AND METAL MATRLX COMPOSITES |
|
|
|
|
|
Influence of Solution and Ambient Temperature on Dynamic Compression Mechanical Properties and Adiabatic Shear Sensitivity of TC21 Titanium Alloy |
ZHANG Junxi1,2, YI Xiangbin2, SHEN Jiancheng2, CHEN Baiming1, LI Baodong2, XU Chuangwen2
|
1 School of Material Engineering, Lanzhou Institute of Technology, Lanzhou 730050, China 2 Key Laboratory of Green Cutting Technology and Application in Gansu Province, Lanzhou Institute of Technology, Lanzhou 730050, China |
|
|
Abstract By using Hopkinson pressure bar test system, the dynamic mechanical properties and adiabatic shear sensitivity of TC21 titanium alloy were studied at 1 500 s-1 strain rate for different temperatures (25—400 ℃) . The results show that the dynamic strength was enhanced and the adiabatic sensitivity became higher with the increasing of the solution temperature, while the plastic strain and the shear band width were decreased. The main reasons for these changes are the decreasing of the total area and lamellar width of α phase. At the same time, with the ambient temperature increases, the dynamic compressive strength decreases, the adiabatic sensitivity increases, and the shear band width increases.
|
Published: 24 December 2020
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (51865026), the Gansu Natural Fund (18JR3RA229), Lanzhou Talent Innovation and Entrepreneurship Project (2017-RC-50). |
About author:: Junxi Zhang received his M.S. degree in June 2008 from Lanzhou University of Technology. His research interests are the wear, dynamic mechanical properties and failure. He has published more than 10 journal papers as the first author. |
|
|
1 Zhang C Q, Xie L S, Chen M H. Materials for Mechanical Engineering, 2016, 40 (2), 94 (in Chinese). 张长清, 谢兰生, 陈明和.机械工程材料, 2016, 40 (2), 94. 2 Fang W P, Chen L, Shi Y W, et al. Journal of Materials Engineering, 2010 (9), 95 (in Chinese). 房卫萍, 陈沦, 史耀武, 等. 材料工程, 2010 (9), 95. 3 Fei Y H, Zhou L, Qu H L, et al. Rare Metal Materials & Engineering, 2007, 36 (11), 1928 (in Chinese). 费玉环, 周廉, 曲恒磊, 等. 稀有金属材料与工程, 2007, 36 (11), 1928. 4 Shao H, Zhao Y Q, Ge P, et al. Rare Metal Materials & Engineering, 2012, 41 (5), 932 (in Chinese). 邵晖, 赵永庆, 葛鹏, 等. 稀有金属材料与工程, 2012, 41 (5), 932. 5 Hou Z M, Zhao Y Q, Zeng W D, et al. Rare Metal Materials and Engineering, 2017, 46 (8), 2087. 6 Fei Y H, Zhou L, Qu H L, et al.Materials Science and Engineering A, 2008, 494, 166. 7 Yang K W, Cheng X W, Zheng C, et al. Rare Metal Materials & Engineering, 2015, 44 (11), 2728 (in Chinese). 杨凯文, 程兴旺, 郑超, 等. 稀有金属材料与工程, 2015, 44 (11), 2728. 8 Jin D, Cheng X W, Zheng C, et al. Rare Metal Materials & Engineering, 2016, 45 (11), 2953 (in Chinese). 靳丹, 程兴旺, 郑超, 等. 稀有金属材料与工程, 2016, 45 (11), 2953. 9 Yang H B, Xiang W L, Xu Y, et al. Chinese Journal of Nonferrous Metals, 2017, 27 (5), 920 (in Chinese). 杨红斌, 向文丽, 徐媛, 等. 中国有色金属学报, 2017, 27 (5), 920. 10 Yang H B, Li M N, Bu H Y. Materials China, 2019, 38 (2), 183(in Chinese). 杨红斌, 李萌蘖, 卜恒勇. 中国材料进展, 2019, 38 (2),183. 11 Li Y F, Zeng X G. Rare Metal Materials & Engineering, 2018, 47 (6), 1760 (in Chinese). 李云飞, 曾祥国. 稀有金属材料与工程, 2018, 47 (6), 1760. 12 Yi X B, Zhang J X, Li B D, et al.Rare Metal Materials & Engineering, 2019, 48 (4), 1220 (in Chinese). 易湘斌, 张俊喜, 李宝栋, 等.稀有金属材料与工程, 2019, 48 (4), 1220. 13 Zhang C Q, Xie L S, Chen M H, et al. Chinese Journal of Nonferrous Metals, 2015, 25 (2), 323 (in Chinese). 张长清, 谢兰生, 陈明和, 等. 中国有色金属学报, 2015, 25 (2), 323. 14 Huang B, Ren W J, Zhang Y M, et al.Rare Metal Materials & Enginee-ring, 2018, 47 (9), 2705 (in Chinese). 黄斌, 任维佳, 张艳敏, 等. 稀有金属材料与工程, 2018, 47 (9), 2705. 15 Wang X B. Rare Metal Materials & Engineering, 2011, 40 (5), 788(in Chinese). 王学滨.稀有金属材料与工程, 2011, 40 (5), 788. 16 Mao P L, Sun Q H, Liu Z, et al.Chinese Journal of Rare Metals, 2016, 40 (12), 1207 (in Chinese). 毛萍莉, 孙庆海, 刘正, 等. 稀有金属, 2016, 40 (12), 1207. |
|
|
|