Materials Reports 2020, Vol. 34 Issue (Z1): 304-306 |
METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
The Research of Key Factors for Impact Toughness of 93W-5Ni-2Fe Alloys |
GAN Jie, HE Lin, LI Qiang, YANG Xiaofeng, FAN Hui
|
Institute of Materials, China Academy of Engineering Physics, Mianyang 621907, China |
|
|
Abstract 93W-5Ni-2Fe alloys were prepared by vacuum sintering. The effects of impurities, defects and surface stress on impact toughness were stu-died. The results showed impurities of tungsten oxide and other oxides resulting from reactions between oxygen and tungsten, iron, nickel and etc deteriorated the properties of tungsten alloys significantly. With a decreasing content of oxygen, the impact toughness of tungsten alloys could be improved considerably. By using a heating rate of 3 ℃/min, few pores and defects were formed in alloys, which showed a good impact toughness. Whereas, by using exorbitant heating rate, a large amount of pores and defects were formed. Vacuum annealing could eliminate the surface stress of tungsten alloys effectively, resulting in an improve impact toughness.
|
Published: 01 July 2020
|
|
About author:: Jie Gan, a staff member of the Institute of Material of China Academy of Engineering Physics, graduated from the metal material major of Hunan Metallurgy University in 2006, and obtained the bachelor degree of material physics major of China University of Petroleum in 2013. Since 2006, he has been engaged in the production and research of metal material powder metallurgy products. |
|
|
1 Islam S H. Rare Metals,2011,30(4),392. 2 Yu Y, Wang E D. Transactions of Nonferrous Metals Society of China,2004,14(5),912. 3 Luo S D, Tang X W, Yi J H. Transactions of Nonferrous Metals Society of China,2004,14(2),241. 4 袁亚楠,胡健,王少龙,等.四川兵工学报,2011,32(7),10. 5 王松,陈宏燕,胡洁琼,等.贵金属,2011,32(3),85. 6 王猛,黄德武,曲家惠,等.塑性工程学报,2012,19(2),102. 7 楼建锋,王政,洪滔,等.高压物理学报,2009,23(1),65. 8 胡兴军.稀有金属与硬质合金,2009,37(3),65. 9 刘国辉,王玲,刘桂荣,等.粉末冶金技术,2013,31(1),40. 10 王季林.粉末冶金工业,2009,19(2),16. 11 刘桂荣,王玲,周武平,等.粉末冶金材料科学与工程,2009,14(5),295. 12 高兆祖,康志君,郑强.稀有金属,1999,23(2),81. 13 高明,马颖澈,孙晓峰.材料研究学报,2001,13,275. 14 齐云馨,赵彤,王改莲,等.兵器材料科学与工程,1999,22(1),3. 15 黄晨光,董永香,段祝平,等.力学进展,2003,33(4),433. 16 侯艳荣,赖运金,杜予晅,等.材料热处理技术,2011,40(2),182. |
|
|
|