细菌纤维素复合材料高值化利用的研究进展

doi:10.11896/cldb.19040007

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (6267KB)
Export: BibTeX | EndNote (RIS)

Abstract Bacterial cellulose (BC) is a type of high molecular polymer produced by microorganisms. In recent years,composite materials prepared by bacterial cellulose have also received much attention and some breakthroughs have been made in the preparation and application of bacterial cellulose composite materials. However, bacterial cellulose often has significant limitations when it is used alone. For example, pure bacterial cellulose is expensive and it does not have characteristics of conductivity, antibacterial, etc., which limits the scope of applications of bacterial cellulose. Therefore, the researches of bacterial cellulose composites are particularly important. However, the applications of bacterial cellulose composites face two difficulties. First, bacterial cellulose composite materials are difficult to produce. Second, bacterial cellulose and auxiliary mate-rials (silk fibroin, silver nanoparticles, etc.) are expensive, which results in high cost of bacterial cellulose compo-sites production. Therefore, the high value utilization of bacterial cellulose became a research hotspot. In recent years, many related studies on bacterial cellulose composites have focused on two aspects. (i) Researchers can obtain high-performance composites by optimizing bacterial cellulosic composite production processes. (ii) Bacterial cellulose composite materials are mainly applied to electrode materials and wound dressings. Researchers had made some breakthroughs in these two fields. However, in general, the development of bacterial cellulose composites is slightly insufficient. In response to this phenomenon, this paper summarized the comprehensive utilization of bacterial cellulose in the fields of biomedicine, optoelectronics, food industry and other fields. In the field of food industry, this article discussed preparation of bioplastics from bacterial cellulose and the developments of food grade Pickering emulsions. In the field of biomedicine, bacterial cellulose combined with benzalkonium chloride, copper, silver, zinc oxide nanoparticles and other antibacterial substances to form composite materials. The new composite materials had shown good effects in tissue engineering field and medical dressing field. In the field of optoelectronics, the applications of bacterial cellulose in catalysts, electrode materials and supercapacitors were introduced in this paper. In other fields, this paper described the studies of bacterial cellulose on heavy metal recovery. At the end of this paper, the problems of bacterial cellulose composites that need to be solved were analyzed, and the development prospects of bacterial cellulose composites were prospected. The paper provided some references for the high value utilization of bacterial cellulose compo-sites.

Key words： bacterial cellulose composite material high value utilization

Published: 27 April 2020

CLC number:

TB332

Fund:This work was financially supported by the Science and Technology Program of Guangzhou, China(201607020025).

About author:: Kai Jiang, a postgraduate student of South China University of Technology,was mainly engaged in the research of bacterial cellulose polymer materials.
Xuesong Zhou, an associate researcher of South China University of Technology, graduated from the Institute of Chemistry of the Chinese Academy of Sciences in 2003 with a Ph.D. She had long been engaged in the research of natural polymer modification and its functional materials. A number of innovative achievements had been made in hemicellulose-based functional polymer mate-rials.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIANG Kai
	ZHOU Xuesong

Cite this article:

JIANG Kai,ZHOU Xuesong. Research Progress on High Value Utilization of Bacterial Cellulose Composites: a Review[J]. Materials Reports, 2020, 34(9): 9164-9169.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19040007 OR http://www.mater-rep.com/EN/Y2020/V34/I9/9164

1 Badshah M, Ullah H, Khan A R, et al. International Journal of Biological Macromolecules,DOI:10.1016/j.ijbiomac.2018.02.135.
2 Brown K, Adrian J.Journal of the Chemical Society, Transactions,1886,49,432.
3 Brown R M, Willison J H, Richardson C L. Proceedings of the National Academy of Sciences of the United States of America,1976,73(12),4565.
4 Ross P, Mayer R, Benziman M. Microbiological Reviews,1991,55(1),35.
5 Numata Y, Kono H, Mori A, et al. Food Hydrocolloids,DOI:10.1016/j.foodhyd.2019.01.060.
6 Somayeh S, Taghi T, Mahdi M, et al. International Journal of Biological Macromolecules,DOI:10.1016/j.ijbiomac.2018.09.047.
7 Khamrai M, Banerjee S L, Paul S, et al. International Journal of Biolo-gical Macromolecules,2019,122,940.
8 Ma X, Lou Y, Chen X, et al. Chemical Engineering Journal,2019,356,227.
9 Liu R, Ma L, Huang S, et al. The Journal of Physical Chemistry C,2016,120(50),28480.
10 Hermansyah H, Carissa R, Faiz M B, et al. Advanced Materials Research,2014,997,158.
11 Ullah H, Santos Hélder A, Khan T. Cellulose,2016,23(4),2291.
12 Zhai X, Lin D, Liu D. Food Research International,2018,103,12.
13 Lin S B, Chen L C, Chen H H. Journal of Food Process Engineering,2011,34(4),1363.
14 Xiang Z, Chen Y, Liu Q, et al. Green Chemistry,2018,20(5),1085.
15 Zheng Y, Jiao Y, Ge L, et al. Angewandte Chemie-International Edition,2013,52(11),3110.
16 McKone J R, Warren E L, Bierman M J, et al. Energy & Environmental Science,2011,4(9),3573.
17 Wei L, Luo J, Jiang L, et al. International Journal of Hydrogen Energy,2018,43(45),20704.
18 Zhang N, Yue L, Xue Y, et al. IEEE Journal of Translational Enginee-ring in Health and Medicine,DOI:10.1109/JTEHM.2018.2863388.
19 Qin D, Gao S, Wang L, et al. Microchimica Acta,2017,184(8),2759.
20 Ayumi D, Jun M, Yehua S, et al. Carbohydrate Polymers,2018,200,381.
21 Long C, Qi D, Wei T, et al. Advanced Functional Materials,2014,24(25),3953.
22 Yu S H. Advanced Materials,2013,25(34),4746.
23 Zhao S, Yan T, Wang H, et al. Applied Surface Science,2016,369,460.
24 Xu X, Sun Z, Chua D H C, et al. Scientific Reports,2015,5,11225.
25 Li Y, Liu Y, Wang M, et al. Carbon,2018,130,377.
26 Bai Q, Xiong Q, Li C, et al. Applied Surface Science,2018,455,795.
27 Wei B, Yang G, Hong F. Carbohydrate Polymers,2011,84(1),533.
28 Zhang Y, Peng H, Huang W, et al. Journal of Colloid and Interface Science,2008,325(2),371.
29 Berndt S, Wesarg F, Wiegand C, et al. Cellulose,2013,20(2),771.
30 Kukharenko O, Jean-François Bardeau, Zaets I, et al. European Polymer Journal,2014,60,247.
31 Napavichayanun S, Yamdech R, Aramwit P. Archives of Dermatological Research,2016,308(2),123.
32 Cai J, Kimura S, Wada M, et al. Biomacromolecules,2009,10(1),87.
33 de Oliveira Barud, Hélida Gomes, Da Silva R R, et al. Carbohydrate Polymers,2016,153,406.
34 Napavichayanun S, Ampawong S, Harnsilpong T, et al. Archives of Dermatological Research,2018,310(10),795.
35 Danica Z, Dragica S, Irina O, et al. International Journal of Biological Macromolecules,2018,118,494.
36 Sajjad W, Khan T, Ul-Islam M, et al. Carbohydrate Polymers,2019,206,548.
37 Wu J, Yin N, Chen S, et al. Cellulose,2019,26(4),2513.
38 Zare E N,Motahari A, Sillanpää M. Environmental Research,2018,162,173.
39 Yang Z, Ren L, Jin L, et al. Chemical Engineering Journal,2018,344,441.
40 Kamal O, Pochat-Bohatier C, Sanchez-Marcano J. Separation and Purification Technology,2017,183,153.
41 Urbina L, Guaresti O, Requies J, et al. Carbohydrate Polymers,2018,193,362.
42 Abdelraof M, Hasanin M S, El-Saied H. Carbohydrate Polymers,2019,211,75.
43 Dórame-Miranda R F, Gámez-Meza N, Medina-Juárez L Á, et al. Carbohydrate Polymers,2019,207,91.
44 Kheiry E V, Parivar K, Baharara J, et al. Iranian Journal of Basic Medical Sciences,2018,21(9),965.
45 Cao S, Shi L, Miao M, et al. Electrochimica Acta,2019,298,22.
46 Yuan Y, Zhou J, Rafiq M I, et al. Electrochimica Acta,2019,295,82.