水泥混凝土路面纹理的研究进展

doi:10.11896/cldb.19010079

Abstract
Figure/Table
References
Related Citation (12)

Download:

Full Text ( PDF ) (5371KB)
Export: BibTeX | EndNote (RIS)

Abstract China is the country with the longest miles of Portland cement concrete (PCC) pavement in the world. PCC pavement is widely applied in rural areas and tunnels of high-grade highway. The surface textures of PCC pavement in long tunnel are easy to be worn to be a mirror. So its surface friction declines rapidly to cause more traffic accidents. Surface textures of PCC pavement are the main parts to provide anti-skidding performance and make noise.
The surface textures of PCC pavement are mainly made up of macrotexture and microtexture. Macrotexture is formed by construction, which allows water to escape beneath a vehicle’s tires to prevent hydroplaning. Microtexture is the fine-scale roughness contributed by the fine aggregate in the concrete mortar to provide surface friction on sunny days. According to the construction time, the textures of PCC pavement can be classified as fresh and harden concrete. Textures for fresh concrete are done between the placement and curing of concrete. The forms include burlap dragging, transverse brooming, transverse or longitudinal tining. Transverse tining is the most common texturing technique used by state highway agencies. Textures for harden concrete are done after the formation of its strength. The forms include diamond grinding, diamond grooving and next generation concrete surface (NGCS). They are also available for restoring surface friction or lowering tire-pavement noise on existing PCC pavement. Because of aggregate and concrete strength, diamond grinding has some defects on land area. The next generation concrete surface is the most recent new concrete texture introduced in the past 20 years. It synthesizes diamond grinding and grooving techniques to make a diffe-rent texture which are more consistent and durable.
The main problems of PCC concrete are tire-pavement noise and wearing of textures. On-Board Sound Intensity (OBSI) is applied to evaluate the noise of textures. Transverse tining makes the loudest noise of all of the textures. NGCS and conventional diamond grinding (CDG) seem to be the quietest pavements. Exposed aggregate makes louder noise itself, but with combination of NGCS or CDG, it can be quiet a lot. The ASTM E274 locked-wheel skid method is used to measure friction. The loss of friction is attributed to the wearing of textures. NGCS has stable friction because of wider land area.
Transverse grooving is widely used in China. There are less researches about PCC textures on mainland. Most of them are focused on the construction parameters of transverse grooving. There are less applications for other forms of textures. For the exposed aggregate, there are more researches than applications. Diamond grinding is still confined to the research stage. It is the first time for the NGCS that is introduced to China.
This review offers the research progress of PCC textures. The types, construction parameters, application and problem were emphasized. Textures have great impact on tire-pavement noise and friction. New textures introduced by this paper could provide reference for the future application of PCC with lower noise and stable friction.

Key words： road engineering cement concrete pavement wearing of surface texture diamond grinding next generation concrete surface (NGCS)

Published: 27 April 2020

CLC number:

U416

Fund:This work was financially supported by the National Natural Science Foundation of China (NSFC) (51308061), the Fundamental Research Funds for the Central Universities (300102258105) and the Provincial Natural Science Foundation of Shaanxi(2019JM-218).

About author:: Zhuohong Cong received her B.S., M.S., and Ph.D. degrees in road and railway engineering from Chang’an University in 2001, 2004 and 2007 respectively. Since 2008, she has been working at Chang’an University. During 2015 to 2016, she had been a visiting scholar at University of California, Davis(UCD). Her research has focused on pavement materials and maintenance.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CONG Zhuohong
	CHEN Hengda
	ZHENG Nanxiang
	ZHOU Wanjun

Cite this article:

CONG Zhuohong,CHEN Hengda,ZHENG Nanxiang, et al. Surface Texture of Cement Concrete Pavement: a Review[J]. Materials Reports, 2020, 34(9): 9110-9116.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19010079 OR http://www.mater-rep.com/EN/Y2020/V34/I9/9110

1 Cong Z H, Wang S, Zheng N X, et al. China Journal of Highway and Transport,2012,25(4),36(in Chinese).
丛卓红,王莎,郑南翔,等.中国公路学报,2012,25(4),36.
2 Xu T, Huang X M, Zhao Y L. Journal of Wuhan University of Technology (Transportation Science & Engineering),2011,35(1),181(in Chinese).
许涛,黄晓明,赵永利.武汉理工大学学报(交通科学与工程版),2011,35(1),181.
3 Huang X M, Xu T, Zeng L. Journal of Highway and Transportation Research and Development,2008,25(8),1(in Chinese).
黄晓明,许涛,曾磊.公路交通科技,2008,25(8),1.
4 Xu X Q, Wu C H, Li S Q, et al. Journal of Wuhan University of Techno-logy (Transportation Science & Engineering),2016(6),1116(in Chinese).
许新权,吴传海,李善强,等.武汉理工大学学报(交通科学与工程版),2016(6),1116.
5 Xu X Q,Wu C H,Li S Q. Guangdong Highway Communications,2016(5),1(in Chinese).
许新权,吴传海,李善强.广东公路交通,2016(5),1.
6 Ni H L, Dai Y H, Zhao Q X. Highway,2010(4),126(in Chinese).
倪洪亮,戴忧华,赵庆鑫.公路,2010(4),126.
7 Zhan W,Lyu Q,Shang Y Q. Journal of Jilin University (Engineering and Technology Edition),2014,44(1),62(in Chinese).
詹伟,吕庆,尚岳全.吉林大学学报(工学版),2014,44(1),62.
8 ACI Committee 325. Materials Journal,1988,85(3),202.
9 PIARC. Technical Committee Report on Surface Characteristics. 18th World Road Congress. Paris,1987.
10 Fu Z, Li H. Highway,2011(1),1(in Chinese).
付智,李红.公路,2011(1),1.
11 Liu Y, Tian B, Niu K M. Journal of Highway and Transportation Research and Development,2012,29(1),28(in Chinese).
刘英,田波,牛开民.公路交通科技,2012,29(1),28.
12 Larry Scofield. Development of Concrete Pavement Textures-Past and Present. Transportation Research Board 89th Annual Meeting, Washington D.C,2010.
13 Beaton J L. Slippery Pavements. Institute of Traffic Engineers, 39th Annual Meeting. Los Angeles,1969,pp.9.
14 Alauddin Ahammed M, Susan L Tighe. Canadian Journal of Civil Engineering,2008,35,727.
15 International Grooving & Grinding Association. Longitudinal Grooving For Bridge Decks,2014.
16 JTG/T F30-2014 technical guidelines for construction of highway cement concrete pavements, China Communications Press, China,2014.
中华人民共和国行业推荐性标准 JTG/T F30-2014 公路水泥混凝土路面施工技术细则,人民交通出版社,2014.
17 Liu Q Q, He S, Yao S G, et al. China Journal of Highway and Transport,1996,9(4),1(in Chinese).
刘清泉,和松,姚思国,等.中国公路学报,1996,9(4),1.
18 Li B. Study on the surface functions for grooved concrete pavement. Ph.D. Thesis, Chang’an University, China,2010(in Chinese).
李波.刻槽混凝土路面表面功能研究.博士学位论文,长安大学,2010.
19 Kuemmel D A, Sontag R C, et al. Noise and Texture on PCC Pavements-Results of a Multi-state Study. Madison: Wisconsin Department of Transportation,2000.
20 Keith W Anderson, Jeff Uhlmeyer, et al. Performance of Concrete Pavements with Longitudinal Tining, Transverse Tining, and Carpet Drag Fi-nish. Olympia: Washington State Department of Transportation,2012.
21 Technical Advisory T 5040.36. Surface Texture for Asphalt and Concrete Pavements. Federal Highway Administration. Washington, D.C,2005.
22 Roger M Larson, Bradley O Hibbs. Tire pavement noise and safety performance. Federal Highway Administration. Washington, D.C,1995.
23 American Association of State Highway and Transportation Officials. AASHTO Guide for Design of Pavement Structures 1993.Washington, D.C,1993.
24 Richard Stubstad, Michael Darter, et al. The Effectiveness of Diamond Grinding Concrete Pavements in California. Sacramento,2005.
25 Larry Scofield. Development and Implementation of the Next Generation Concrete Surface. International Grooving & Grinding Association/American Concrete Pavement Association,2017.
26 George Vorobieff. Grinding Concrete Pavements. North Sydney,2016.
27 Wang P. Study on the surface texture reconstruction technology of existing portland cement concrete pavement. Master’s Thesis, Chang’an University, China,2010(in Chinese).
王鹏.旧水泥路面表面纹理改造技术研究.硕士学位论文,长安大学,2010.
28 Zhou W J. Research on method and evaluation of cement pavement texture restoration.Master’s Thesis,Chang’an University,China,2018(in Chinese).
周晚君.水泥路面纹理构造恢复方法及评价研究.硕士学位论文,长安大学,2018.
29 Tyler Dare, William Thornton, Tanya Wulf, et al. Purdue Acoustical Effects of Grinding and Grooving on Portland Cement Concrete Pavements. Purdue University’s Institute for Safe, Quiet and Durable Highways/American Concrete Pavement Association,2012.
30 Irwin M. Guada, Arash Rezaei, John T Harvey, et al. Evaluation of Grind and Groove (Next Generation Concrete Surface) Pilot Projects in California. University of California Pavement Research Center,2012.
31 International Grooving & Grinding Association. NGCS Test Section Construction on New and Existing Roadways,2014.
32 Larry Scofield. MnROADS NGCS LITE Test Strip Evaluation. American Concrete Pavement Association,2011.
33 AASHTO TP 76-15-Standard method of test for measurement of tire-pavement noise using the On-Board Sound Intensity (OBSI) method. American Association of State and Highway Transportation Officials, Washington, D.C, 2015.
34 Smith K L, Hall J W, Littleton P. NCHRP REPORT 634 :Texturing of Concrete Pavements. National Cooperative Highway Research Program 10-67. Washington, D.C,2009.
35 Hall J W, Smith K L, Littleton P. Texturing of Concrete Pavements Final Report Appendixes A-F. National Cooperative Highway Research Program 10-67. Washington, D.C,2008.
36 Larry Scofield. Chicago I-355 Testing of NCHRP 10-67 Site Locations. American Concrete Pavement Association,2010.
37 Larry Scofield. Kansas I-70 EB Surface Texture Test Section OBSI Evaluation. International Grooving & Grinding Association,2012.
38 Larry Scofield. 2015 OBSI Summary Report. International Grooving & Grinding Association,2015.
39 Larry Scofield. OBSI Testing of MnROADs I-94 WB Exposed Aggregate and Diamond Ground Test sections. International Grooving & Grinding Association,2012.
40 Liu Y M, Han S, Tao Z J, et al. Journal of Chang’an University (Natural Science Edition),2012(4),16(in Chinese).
刘亚敏,韩森,陶志金,等.长安大学学报(自然科学版),2012(4),16.
41 Li B, Zhang Z W, Kang H W, et al. Journal of Traffic and Transportation Engineering,2016,16(1),8(in Chinese).
李波,张正伟,康宏伟,等.交通运输工程学报,2016,16(1),8.
42 ASTM International. Standard Test Method for Skid Resistance of Paved Surfaces Using a Full Scale Tire. ASTM E274/E274M-11, Annual Book of ASTM Standards, Vol. 04.03, West Conshohocken, Penn.,2012.
43 Larry Scofield. Kansas I-70 EB Friction Test Results. International Grooving & Grinding Association,2015.
44 Bernard I Izevbekhai, James Wilde W. Innovative Diamond Grinding on MnROAD Cells 7, 8, 9, and 37. Minnesota Department of Transportation, Mankato,2010.
45 Han S. Study on exposed-aggregate cement concrete pavement. Ph.D. Thesis, Chang’an University, China,2006(in Chinese).
韩森.露石水泥混凝土路面研究.博士学位论文,长安大学,2006.
46 Song Y C, Fu B F, Liang N X. Journal of Chongqing Jiaotong University(Natural Science),2015(6),43(in Chinese).
宋永朝,付波飞,梁乃兴.重庆交通大学学报(自然科学版),2015(6),43.
47 Huo M. Research on skid resistance function attenuation and evaluation method of cement concrete pavement. Master’s Thesis, Chang’an University, China,2009(in Chinese).
霍明.水泥混凝土路面抗滑功能衰减规律及评价方法研究.硕士学位论文,长安大学,2009.
48 Xiao P F. Research on the surface properties and durability of surface texture of cement concrete pavement. Master’s Thesis, Chang’an University, China,2011.
肖鹏飞.水泥混凝土路面表面功能及其耐久性评价方法研究.硕士学位论文,长安大学,2011.