溶胶-凝胶法制备离子印迹聚合物及其用于选择性吸附重金属离子的综述

doi:10.11896/cldb.18090044

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3053KB)
Export: BibTeX | EndNote (RIS)

Abstract Ion imprinted polymers (IIPs) are polymeric materials, which have a three-dimensional structure and are capable of higher ionic recognition. The materials, synthesized from cross-linking polymerization of functional monomers with template ions and followed by elution of template. Owing to structural stability, specific recognition and high selectivity, IIPs possess broad potential application prospects in the field of heavy metal pollution remediation. However, the heterogeneity of imprinting sites distribution, the blocking of imprinting sites, and the low mass transfer efficiency have become the bottlenecks of IIPs in the application niches of heavy metal ions selective adsorption. Therefore, novel IIPs synthesis strategies to address the bottlenecks mentioned above are in badly need.
　　A wide variety of IIPs synthesis strategies have been explored in recent years. Some issues have been overcome by optimizing the assembly and polymerization processes in IIPs synthesis. Correspondingly, the special recognition and adsorption capacities of IIPs have been improved. Assembly and polymerization processes in IIPs synthesis are mainly realized with sol-gel technology based on step by step synthesis and free ra-dical polymerization method based on chain polymerization. Due to mild reaction condition, simplicity of process control, structural predetermination, thermostability and mechanical strength of products, sol-gel technology has prevailed in many chemical scenarios.
　　Sol-gel technology for IIPs synthesis can be mainly divided into three types, including embedding, copolymerization, and surface imprinting technique. The embedding method possesses the advantages of operational simplicity, mild reaction condition, distribution homogeneity of orga-nic composition and imprinting sites in IIPs, whereas over-depth and hard-elution of template ions, poor imprinting sites exposure, and slow mass transfer are the inherent insufficiency. The IIPs obtained from copolymerization with nanoscale porous structure and large specific area provide spatial accessibility for small size particles which is beneficial for the capture and recognition of template ions. Meanwhile, IIPs obtained from copolymerization still struggle with the limitation of bonding ability between template and functional monomer, instability of spatial orientation functio-nal group. The surface imprinting technique maintaining the inherent features of matrix and endowing supporter surface with imprinting sites by loading, grafting, and modification has been widely attracting lots of research interest. Thus, IIPs obtained from surface imprinting technique possess high adsorption capacity, fast mass transfer, high adsorption selectivity.
　　This current research progress focuses on the routes of sol-gel technology for IIPs synthesis and corresponding features. The three main sol-gel strategies, including embedding, copolymerization, and surface imprinting technique, with their unique properties are discussed. Application of IIPs in heavy metal (Cu²⁺, Pb²⁺, Cd²⁺, Hg²⁺, Cr⁶⁺) pollution remediation is also introduced. In conclusion, a summary and the perspectives on the directions that might lead the future development of this amazing field are presented.

Key words： ion imprinting polymers sol-gel method metal ions adsorption selectivity

Published: 16 January 2020

CLC number:

O635

About author:: Lanqing Wangreceived her B.E. degree in Jiyang College of Zhejiang A & F University in 2017. She is currently a master candidate at the Guilin University of Technology under the supervision of Prof. Qinglin Xie. Her research has focused on preparation of environmental functional materials for removing metal ions in water treatment;Qinglin Xie received his Ph.D. degree in Nanjing University. In 2001, he became a chair professor at Guilin Institute of Technology (now is Guilin University of Technology). His research has focused on control of water pollution and environmental pollution chemistry. He has published more than 160 papers in domestic and international journals. He has applied for 15 patents. He has presided over the projects such as the National Natural Science Foundation of China, the Guangxi Na-tural Science Foundation, the China Geological Survey Project and the horizontal project of the Zhanjiang Branch of CNOOC.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Lanqing
	ZHONG Yijian
	CHEN Nanchun
	XIE Qinglin

Cite this article:

WANG Lanqing,ZHONG Yijian,CHEN Nanchun, et al. Preparation of Ion Imprinted Polymers by Sol-Gel Method and Their Application in Metal Ions Selective Adsorption:a Review[J]. Materials Reports, 2020, 34(5): 5016-5022.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18090044 OR http://www.mater-rep.com/EN/Y2020/V34/I5/5016

1 Kong D L, Qiao N, Liu H, et al. Chemical Engineering Journal, 2017, 326, 141.
2 Xu Y, Huang M H, Luo X B. Applied Surface Science, 2019, 467, 135.
3 Shah Syed Mazhar, Su X G, Muhammad Faheem, et al. Chemistry Select, 2019, 4(1), 259.
4 Peyman Shirazifard, Sodeh Sadjadi, Seyed Javad Ahmadi, et al. Separation Science and Technology, 2016, 51(2), 248.
5 Haupt Karsten, Mosbach Klaus. Chemical Reviews, 2000, 100(7), 2495.
6 Basudam Adhikari, Sarmishtha Majumdar. Progress in Polymer Science, 2004, 29(7), 699.
7 Zeng J X, Lv C Q, Liu G Q, et al. Journal of Membrane Science, 2019, 572, 428.
8 Chen L, Wu Y L, Dong H J, et al. Separation and Purification Techno-logy, 2018, 197, 70.
9 Liu Y L, Ai K L, Lu L H. Chemical Reviews, 2014, 114(9), 5057.
10 Jun Matsui, Ian A Nicholls, Isao Karube, et al. ChemInform, 1996, 61(16), 5414.
11 Ozkahraman Bengi. Journal of Polymer and the Environment, 2018, 26(3), 1113.
12 Luo X B, Guo B, Luo J M, et al. ACS Sustainable Chemistry & Enginee-ring, 2015, 3(3), 460.
13 Hiroyuki Nishide, Eishun Tsuchida. Die Makromolekulare Chemie, 1976, 177, 2295.
14 Biju V M, Mary Gladis J, Prasada Rao T. Analytica Chimica Acta, 2003, 478(1), 43.
15 Kala R, Mary Gladis J, Prasada Rao T. Analytica Chimica Acta, 2004, 518(1-2), 143.
16 He F F, Wang H Q, Wang Y Y, et al. Journal of Radioanalytical and Nuclear Chemistry, 2013, 295(1), 167.
17 Wu X Y. Microchimica Acta, 2012, 176(1-2), 23.
18 Chang S, Ding G S, Tang A N, et al. Analytical Methods, 2017, 9, 1658.
19 Kong D L, Wang N, Qiao N, et al. ACS Sustainable Chemistry & Engineering, 2017, 5(8) 7401.
20 Periyasamy Soodamani, Gopalakannan Venkatrajan, Viswanathan Natrayasamy. Carbohydrate Polymers, 2017, 174, 352.
21 Yang S, Qian J, Kuang L J, et al. ACS Applied Materials & Interfaces, 2017, 9(34), 29337.
22 Zhu F, Li L W, Xing J D. Journal of Hazardous Materials, 2017, 321, 103.
23 Ma Q, Wanyan S J, Zhu Y B, et al. Materials Reviews, 2018, 32(s1), 113(in Chinese).
马勤, 完彦少君, 朱雪斌, 等. 材料导报, 2018, 32 (专辑31), 113.
24 Branger Catherine, Meouche Wakid, Margaillan Andre. Reactive & Functional Polymers, 2013, 73(6), 859.
25 Kang Jin Kyu, Lee Seung Chan, Kim Song Bae. Microporous and Mesoporous Materials, 2018, 272, 193.
26 刘占超, 胡兆勇, 高延敏, 等. 中国专利, CN104163921A, 2014.
27 杨虹, 冯启言, 田慧娟, 等. 中国专利,CN201510700581.4, 2015.
28 Li W M, He R, Tan L, et al. Journal of Sol-Gel Science and Technology, 2016, 78(3), 1.
29 Fan H T, Lu Y, Liu A J, et al. Analytica Chimica Acta, 2015, 897, 24.
30 Fan H T, Tang Q, Sun Y, et al. Chemical Engineering Journal, 2014, 258, 146.
31 Guney Sevgi, Guney Orhan. Sensors and Actuators B-Chemical, 2016, 231, 45.
32 Zhang Z, Li J H, Song X L, et al. RSC Advances, 2014, 4(87), 46444.
33 Ren Z Q, Zhu X Y, Du J, et al. Applied Surface Science, 2018, 435, 574.
34 Khoddami Nafiseh, Shemirani Farzaneh. Talanta, 2016, 146, 244.
35 Zargar Behrooz, Khazaeifar Ali, Microchimica Acta, 2017, 184(11), 4521.
36 Jia J, Wu A H, Luan S J. Chemical Research and Application, 2015 (1), 8(in Chinese).
贾晋, 吴爱华, 栾胜基, 化学研究与应用, 2015(1),8.
37 Huang J F. Sol-gel principle and technology, Chemical Industry Press, China, 2005(in Chinese).
黄剑锋编. 溶胶-凝胶原理与技术, 化学工业出版社, 2005.
38 Zou H, Wu S S, Shen J. Chemical Reviews, 2008, 108(9), 3893.
39 Fu J Q, Chen L X, Li J H, et al. Journal of Materials Chemistry A, 2015, 3(26), 13598.
40 Buhani, Narsito, Nuryono, et al. Desalination and Water Treatment, 2015, 55(5), 1240.
41 Zhu B, Zhou L Y, Zhang Q, et al. Desalination and Water Treatment, 2017, 86, 231.
42 Fan H T, Sun X T, Li W X.Journal of Sol-Gel Science and Technology, 2014, 72(1), 144.
43 Ferreira Vanessa R A, Azenha Manuel A, Mêna M Teresa, et al. Journal of Molecular Recognition, 2018, 31(6), 1.
44 Ghanei-Motlagh M, Taher M A. Chemical Engineering Journal, 2017, 327, 135.
45 Xu S F, Chen L X, Li J H, et al. Journal of Hazardous Materials, 2012, 237, 347.
46 Zhang Q G, Wu J Y, Luo X B.RSC Advances, 2016, 6(18), 14916.
47 Karagoz Fehmi, Guney Orhan. Journal of Sol-Gel Science and Technology, 2015, 76(2), 349.
48 Liang Q W, Geng J J, Luo H J, et al. Journal of Molecular Liquids, 2017, 248, 767.
49 Qi X, Gao S, Ding G S, et al. Talanta, 2017, 162, 345.
50 Liang Q W, Luo H J, Geng J J,et al. Chemical Engineering Journal, 2017, 338, 62.