| REVIEW PAPER |
|
|
|
|
|
| Application and Research Status of Zn-Cu-Ti Alloy |
DING Xueming1, ZHOU Suhong2, YE Bing1, JIANG Haiyan1,
WANG Qudong1, DING Wenjiang1
|
1 National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240;
2 Nantong L-S Light Alloy Co. Ltd, Nantong 226144; |
|
|
|
|
Abstract The research progress on Zn alloy and the feasibility of replacing copper with zinc are introduced. The applications and advantages of Zn-based creep-resistant alloy, particularly the Zn-Cu-Ti alloy plate are mainly reviewed. This review summarizes the current status of the research and application of Zn-Cu-Ti alloy, reveals the role of Cu, Ti and other alloying elements, and discusses the effect of composition optimization and thermo-mechanical treatment on microstructure evolution and mechanical perfor-mance. Finally, the prospective applications of Zn-Cu-Ti alloy are concluded.
|
|
Published: 02 May 2018
|
|
|
|
|
1 孙连超, 田荣璋. 锌及锌合金物理冶金学[M]. 长沙:中南工业大学出版社,1994.
2 Deng Yong, Zhang Dingchuan, Yan Bin, et al. The phase structure analysis of high-iron sphalerite in high-temperature oxidation roas-ting[J]. Mater Rev:Res,2015,29(11):109(in Chinese).
邓勇, 张丁川, 杨斌, 等. 高铁闪锌矿高温氧化焙烧产物物相结构分析[J]. 材料导报:研究篇,2015,29(11):109.
3 高仑. 锌与锌合金及其应用[M]. 北京:化学工业出版社,2011:3.
4 Kaya H, Cadirli E, Ulgen A. Investigation of the effect of composition on microhardness and determination of thermo-physical properties in the Zn-Cu alloys[J]. Mater Des,2011,32(2):900.
5 Dong Changsheng, Zhang Weiming, Zhang Yi, et al. Research on low-temperature impact toughness and anti-abrasive performance of aluminum zinc-based alloy[J]. Mater Rev,2014,28(S2):497(in Chinese).
董长胜,张伟明,张毅,等.锌铝合金低温冲击韧性及耐磨性研究[J]. 材料导报,2014,28(专辑24):497.
6 Purcek G, Saray O, Kucukomeroglu T, et al. Effects of equal-channel angular extrusion on the mechanical and tri-biological properties of as-cast Zn-40Al-2Cu-2Si alloy[J]. Mater Sci Eng A,2010,527(15):3482.
7 Sun Liping. Researches on free-cutting deformation zinc alloys and their heat-treatment processes[D]. Changsha: Central South University,2011(in Chinese).
孙利平. 易切削变形锌合金的研制及热处理研究[D]. 长沙:中南大学,2011.
8 Boyuka U, Kaya H, Cadirli E, et al. Investigation of the effect of solidification processing parameters on microhardness and determination of thermo-physical properties in the Zn-Cu peritectic alloys[J]. J Alloys Compd,2010,491(1-2):143.
9 Xiao Lairong, Zhang Ximin, Wang Yan, et al. Static recrystallization behavior of Zn-1.0Cu-0.2Ti alloy[J]. Chin J Nonferrous Met,2011,21(11):2775(in Chinese).
肖来荣, 张喜民, 王艳,等. Zn-1.0Cu-0.2Ti 合金的静态再结晶行为[J]. 中国有色金属学报,2011,21(11):2775.
10 Geng Zhanji. Element alloying and heat treatment effect on alloys SCC behaviors and creep mechanism[D]. Changsha: Central South University,2012(in Chinese).
耿占吉. 合金化与热处理对锌铜钛合金应力腐蚀性能和蠕变性能的影响研究[D]. 长沙:中南大学,2012.
11 Wei Huaguang, Li Weiwen. Investigation of zinc-copper-titanium alloy strip and its application in clothing buttons[J]. Shanghai Nonferrous Met,2015,36(1):3(in Chinese).
魏华光,李伟文.服装纽扣用锌-铜-钛合金带材的研制[J]. 上海有色金属,2015,36(1):3.
12 Miettinen J. Thermodynamic description of Cu-Mg-Ni and Cu-Mg-Zn systems[J]. CALPHAD,2008,32:389.
13 Doi K, Ono S, Ohtanl H, et al. Thermodynamic study of the phase equilibria in the Sn-Ti-Zn ternary system [J]. Phase Equilib Diffus,2006,27:63.
14 Diot M, Philippe M J, WeGria J, et al. Addition elements and texture gradients in rolled zinc alloy[J]. Scr Mater,1999,40(11):1295.
15 Julius C S,Pierre P.Non-ferrous metal ternary systems:Part 2[M]. Stuttgart, Germany: Springer Berlin Heidelberg Press,2007:451.
16 Yu Lina, Huang Weiqing. Microstrcture and fitting analysis of Zn-Cu-Ti alloy during deformation[J]. Foundry Technol,2015,36(8):1914(in Chinese).
于丽娜, 黄伟青. 变形过程中Zn-Cu-Ti 合金的微观组织变化与计算机拟合分析[J]. 铸造技术,2015,36(8):1914.
17 Zhang Ximin, Xiao Lairong, Wen Yanning, et al. Microstructure and mechanical properties of extruded Zn-Cu-Ti alloy[J]. Mater Sci Eng,2010,28(4):1(in Chinese).
张喜民, 肖来荣, 温燕宁, 等. 挤压Zn-Cu-Ti 合金组织及其力学性能[J]. 材料科学与工程学报,2010,28(4):1.
18 Lee P H, Lin C P, Chen C M. Retardation of the Cu5Zn8 phase fracture and improvement of shear strength of the Sn-9 wtpct Zn/Cu interface by inserting an electroless palladium layer[J]. Metall Mater Trans A,2013,44(1):125.
19 Song Keixing, Zhang Ya, Zhang Yanmin, et al. Research on fabrication of Cu/Zn compound materials by solid-liquid bonding method under the condition of pressure[J]. Mater Rev: Res,2014,28(5):16(in Chinese).
宋克兴, 张亚, 张彦敏, 等. 压力条件下固-液复合法制备铜/锌复合材料的研究[J]. 材料导报:研究篇,2014,28(5):16.
20 Boczkal G. Structure and properties of Zn-Ti0.2-Cu0.15 single crystal containing eutectic precipitates[J]. Archives Metall Mater,2013,58(4):1019.
21 葛连福, 李宏, 杨建华. 铝合金板和锌合金板屋面[C]//第二届全国现代结构工程学术研讨会.天津,2000:682.
22 Wang Yanhong, Xiao Lairong, Geng Zhanji, et al. Effects of strain rate and environment medium on stress corrosion cracking of Zn-Cu-Ti alloy[J]. Corros Prot,2013,34(5):411(in Chinese).
王彦红, 肖来荣, 耿占吉, 等. 应变速率及环境介质对Zn-Cu-Ti合金应力腐蚀行为的影响[J]. 腐蚀与防护,2013,34(5):411.
23 Deng Meng, Jia Shuguo, Song Keixing, et al. Hot deformation behavior of Zn-2.12Cu-0.056Ti alloy[J]. Special Cast Nonferrous Alloys,2014,34(7):772(in Chinese).
邓猛, 贾淑果, 宋克兴, 等. Zn-2.12Cu-0.056Ti合金热变形行为的研究[J]. 特种铸造及有色合金,2014,34(7):772.
24 Zhang Ximin. Research on creep mechanism and properties of Zn-Cu-Ti alloy during deformation[D]. Changsha: Central South University,2010(in Chinese).
张喜民. 变形锌铜钛合金蠕变行为及其组织与性能研究[D]. 长沙:中南大学,2010.
25 张喜民, 肖来荣, 王艳, 等. Zn-1.0Cu-0.2Ti合金的高温拉伸蠕变行为[C]// 2010中国材料研讨会论文集.北京:中国材料研究学会,2010:160.
26 Kim W J, Chung S W, Chung C S, et al. Super plasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures [J]. Acta Mater,2001,49(16):3340.
27 Xiao Lairong, Zhang Ximin, Wang Yan, et al. High temperature creep behavior of Zn-1.0Cu-0.2Ti alloy[J]. Adv Mater Res,2011,287:770.
28 Boczkal G, Mikułowski B. The brittleness of Zn-Cu-Ti sheet alloys[J]. Archives Metall Mater,2015,60(3):2355.
29 Wołczyński W, Boczkal G. Pattern selection within the stripes strengthening the hexagonal (Zn)-single crystal[J]. Inz＇ynieria Materiałowa,2012,189:349.
30 Chen Hang, Yang Deng, Tian Mingjie, et al. Effect of termomechanical treatment on the structure and properties of Zn-Cu-Ti alloy[J]. Special Cast Nonferrous Alloys,2015,35(6):671(in Chinese).
陈行, 杨灯, 田明杰, 等. 形变热处理对Zn-Cu-Ti合金组织与性能的影响[J]. 特种铸造及有色合金,2015,35(6):671.
31 Zuehlke T, Alkorta J, Garcia-Rosales C, et al. Structure and texture of twin roll cast strips of Zn-Cu-Ti zinc alloy[J]. Mater Sci Technol,2014,30(1):91.
32 Boczkal G. Second phase morphology in the Zn-Ti0.1-Cu0.1 single crystals obtained at different growth rates[J]. Archives Metall Mater,2012,57:479.
33 Qiao Yanyan, Song Kexing, Zhang Yanmin, et al. Effects of heat treatment on microstructure and mechanical properties of deformed Zn-Cu-Ti alloy[J]. J Henan University of Science Technology:Nat Sci,2015,36(1):6(in Chinese).
乔艳艳,宋克兴,张彦敏,等.热处理对变形Zn-Cu-Ti 合金组织和性能的影响[J]. 河南科技大学学报:自然科学版,2015,36(1):6.
34 Deng Meng, Jia Shuguo, Song Kexing, et al. Microstructure and properties of Zn-0.9Cu-0.026Ti alloy[J]. Trans Mater Heat Treat,2014,35(8):31(in Chinese).
邓猛, 贾淑果, 宋克兴, 等. Zn-0.9Cu-0.026Ti合金组织和性能的研究[J]. 材料热处理学报,2014,35(8):31.
35 Wołczyński W. Thermodynamic pattern selection in the stripes ge-nerated periodically during the (Zn)-single crystal growth[J]. Archives Metall Mater,2013,58:309.
36 Wang Yan, Xiao Lairong, Wan Lei, et al. Microstructure and pro-perties of two kinds of wrought Zn-Cu-Ti alloy[J]. Special Cast Nonferrous Alloys,2012,32(11):1054(in Chinese).
王艳, 肖来荣, 万磊, 等. 两种变形Zn-Cu-Ti锌合金的组织与性能[J]. 特种铸造及有色合金,2012,32(11):1054.
37 Pan H, Pan F, Wang X, High conductivity and high strength Mg-Zn-Cu alloy[J]. Mater Sci Technol,2014,30(7):760.
38 Geng Zhanji, Xiao Lairong, Cai Zhenyang, et al. Effect of trace elements Cr and Mg on mechanics and creep properties of Zn-Cu-Ti alloys[J]. Mining Metall Eng,2012,32(5):101(in Chinese).
耿占吉, 肖来荣, 蔡玔阳,等. 微量元素Cr、Mg对Zn-Cu-Ti合金力学和蠕变性能的影响[J]. 矿冶工程,2012,32(5):101.
39 Wang Xin, Liang Zhurong, Xu Xueqing. A high efficient photoluminescence Zn-Cu-In-S/ZnS quantum dots with long lifetime[J]. J Alloys Compd,2015,640:134.
40 Ma Daozhang. Building with znic once and for all[J]. World Nonferrous Met,2013(12):20(in Chinese).
马道章. 用锌建筑一劳永逸[J]. 世界有色金属,2013(12):20.
41 Ozdemir Rasim, Karahan I H. Electrodeposition and properties of Zn, Cu, and Cu1-x Znx thin films[J]. Appl Surf Sci,2014,318:314.
42 Li X, Gagnoud A, Wang J. Effect of a high magnetic field on the microstructures in directionally solidified Zn-Cu peritectic alloys[J]. Acta Mater,2014,73:83.
43 Gu Peng, Chen Haiyan. Research on high temperature deformation of Zn-0.8Cu-0.15Ti alloy[J]. Foundry Technol,2014,35(6):1144(in Chinese).
谷鹏, 陈海燕. 汽车用Zn-0.8Cu-0.15Ti合金的高温变形性研究[J]. 铸造技术,2014,35(6):1144.
44 Tseng Yuwei, Huang Chengliang. Sintering behavior and microwave dielectric properties of ZnCuTiO4 ceramics[J]. J Alloys Compd,2015,638:29.
45 Yoo Hoon, Lee Sung-Hyung, Lee Jun-Kyung. Mechanism of bon-ding between Zn-Al-coated wires and Zn-Cu alloy casting medium in hot casting socket terminations for large bridge cables[J]. Constr Build Mater,2015,76:396.
46 Peng Shuguang. Zn-Cu-Ti alloy and its industry prospects[J]. Hunan Nonferrous Met,2003,19(2):35(in Chinese).
彭曙光. 锌铜钛合金及其产业前景分析[J]. 湖南有色金属,2003,19(2):35.
47 Wang Yan, Niu Ditao, Song Zhanping. Durability of steel fiber reinforced concrete under combined effect of flexural loading and acid rain erosion[J]. Mater Rev:Res,2014,28(12):120(in Chinese).
王艳, 牛荻涛, 宋占平. 弯曲荷载与酸雨侵蚀共同作用下钢纤维混凝土的耐久性能[J]. 材料导报:研究篇,2014,28(12):120. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
