可回收锚件机理与工程应用研究

Abstract
Figure/Table
References
Related Citation (0)

Download:

Full Text ( PDF ) (2091KB)
Export: BibTeX | EndNote (RIS)

Abstract China has been using bolt support for coal mine support projects since 1954 and has a history of more than 60 years. At the beginning of the introduction, due to the complicated geological conditions of coal mines, large deformation of surrounding rock of roadway, and imperfect monitoring methods, bolt supporting is developing slowly in China. Chinese coal resources are abundant. By the 1990s, the state’s investment in coal mining has increased, and China’s bolt supporting technology has been greatly developed, and it is increasingly used in other filds. At the same time, with the using of underground space, the drawbacks of bolt supporting are also exposed. The bolts are permanently discarded in the ground, which pollute the environment and increase the difficulty of subsequent utilization of underground space. Compared with traditional anchors, retrievable anchors have the following advantages: (1) the anchors can be reused and the overall cost is reduced; (2) the anchors do not stay underground, which is conducive to environmental protection.
However, with the deepening of the application of recyclable anchors in various fields, the physical and mechanical properties of various rock masses are quite different. Recyclable anchors need to be explored from multiple angles to explore new structures, new forms and surrounding rock coordination. Deformation mechanism, coupling deformation under various environmental effects and applicability of retrievable anchors for large deformation surrounding rock. There are many types of retrievable anchors, and the anchoring mechanism is complex and diverse. There is no uniform anchoring principle; the construction process of some retrievable anchors is complicated, the manpower and material resources required for recycling are large, and the construction cost and construction period are increased, which is not conducive to it is promoted and used; the cost is too high, and there is no specific application route after recycling, and a relatively complete industrial chain has not yet been formed. Therefore, in recent years, in addition to the increasing variety of retrievable anchors, the research on the anchoring mechanism has been increasing, and has achieved excellent results. Increase the application of the retrievable anchor in actual engineering, monitor the deformation of the recoverable anchor in a certain period of time, enhance the combination of production, study and research, and form a demonstration effect. In some projects, the recovery rate of the bolt body can reach 100%.
Firstly, the research method of anchoring mechanism of pressure-dispersed anchors was described. Secondly, the pullable retrievable anchor, hot-melt retrievable anchor cable and mechanical recyclable were analyzed from the anchoring mechanism, and introduce its specific engineering application at home. Finally, the research pointed out the problems of the recoverable anchor, and looked forward to its future development direction.

Key words： retrievable anchor retrievable bolt anchoring mechanism sustainable development

Published: 25 November 2019

CLC number:

TU601

Fund:This work was financially supported by the National Natural Science Foundation of China (51878554,41672308,51378182),Shaanxi Provincial Natural Science Basic Research Program-Key Projects (2018JZ5012).

About author:: Yousheng Deng, born in 1969, doctor, professor, doctoral tutor. In 2005, he graduated from the School of Civil Engineering of Southeast University with a Ph.D. degree in Bridge and Tunnel Engineering. He has been engaged in scientific research at Wuhan University of Technology and the postdoctoral mobile station of Civil Engineering of Hunan University, and has been on schedule. Member of the Academic Committee of Pile Foundation of Soil Mechanics and Geotechnical Engineering Branch of China Civil Engineering Society. Mainly engaged in the teaching and research work of bridge foundation engineering and building construction basic engineering, engineering structure disaster prevention and mitigation. The first author or correspondent author published more than 80 research papers in more than 40 domestic and foreign academic journals, including more than 20 papers by SCI and EI; 5 editorial textbooks, one of which won the special prize of Peking University Press, Edited “Pile-Based Engineering Handbook” (2nd Edition); authorized 5 national patents; hos-
ted 3 projects of the National Natural Science Foundation of China and 2 provincial key projects, participated in the Ministry of Communications Western Transportation Science and Technology Project and the Ministry of Communications Enterprise Joint Research Project, China Railway Bridge Bureau Group scientific research projects, etc.; won 3 provincial science and technology awards.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DENG Yousheng
	CAI Mengzhen
	WANG Yixiong
	SU Jialin
	SUN Yani

Cite this article:

DENG Yousheng,CAI Mengzhen,WANG Yixiong, et al. Research on Retrievable Anchor Mechanism and Its Engineering Application[J]. Materials Reports, 2019, 33(Z2): 473-479.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2019/V33/IZ2/473

1 Shah R, Gasol K. Rock Bolt Support Manual, Water Resources and Hydropower Press, Beijing,1986.
2 Zhang Houquan, Miao Xiexing, Zhang Guimin, et al. International Journal of Mining Science and Technology,2017,27(6),989.
3 Mohammad Mohammadi,Mohammad Farouq Hossaini,Heydar Bagloo. Bulletin of Engineering Geology and the Environment,2017,76(1),231.
4 Shi Jie, Lin Peng, Zhou Yuande, et al. Rock Mechanics and Rock Engineering,2018,51(8),2533.
5 Chen Guoqing, Chen Tuo, Chen Yi, et al. Engineering Geology,2018,241,109.
6 Wang Yaen,Wang Yuanhan,Xie Hongyang. Journal of China University of Geosciences,2007(2),185.
7 侯庆.压力分散型锚杆工作机理与现场试验研究.博士学位论文.重庆大学,2003.
8 卢黎,张永兴,吴曙光.岩土力学,2008(6),1517.
9 张季如,唐保付.岩土工程学报,2002(2),188.
10 庞有师,刘汉龙,龚医军.岩土力学,2010,31(6),1813.
11 张鑫鑫,符贵军,刘海康,等.公路,2017,62(11),1.
12 李晓军,李世民,徐宝.施工技术,2015,44(7),37.
13 钟晓晖,邵孟新,罗振平.建筑监督检测与造价,2015,8(2),28.
14 刘鸿,周德培,王志斌.岩石力学与工程学报,2012,31(S1),3075.
15 刘鸿,周德培.岩土力学,2012,33(4),1040.
16 叶红,陈燕平.金属矿山,2015(4),114.
17 Barley A D, Payne W D, Mebarron P L. In: 12^th, Europeane Conference in Soilmechnics and Geotechnical Engineering. Amaterdam,1999,pp.1465.
18 陆观宏,倪光乐,莫海鸿.岩土工程,2006,9(5),38.
19 张为.新型预应力锚索技术研究及应用.博士学位论文,重庆交通大学,2016.
20 苏州市能工基础工程有限责任公司.中国专利,201611163994.4,2017.
21 赵志孟,郑先昌,王建强.城市勘测,2015(4),173.
22 张吉雄,李青峰,欧阳昶,等.矿山压力与顶板管理,2005,4(7),7.
23 冯梅梅,茅献彪.矿山压力与顶板管理,2005(4),14.
24 黄靖龙.新型机械式可回收端锚杆支护机理及应用研究.博士学位论文,中国矿业大学,2009.
25 石义习,时永康,赵徇.山东工业技术,2016(22),84.
26 李兆平,黄明利,王建,等.地下空间与工程学报,2012,8(1),154.
27 曾庆义.中国专利,200610061974.6,2007.
28 李保国,宁锐,林建平,易建伟,等.施工技术,2007(9),37.
29 李锡银.中国水运,2008,8(9),187.
30 李习伟,王建,李兆平.铁道建筑,2016(8),100.
31 杨新安,陆士良.中国煤炭,1995(3),5.
32 Kang Yongshui,Liu Quansheng, Xi Hailong, et al. Engineering Geology,2018,240,10.
33 Wang Haitao, Tong Cheng, Wang Yajun, et al. IOP Conference Series: Earth and Environmental Science,2018,186,5.
34 Li Qinghai, Shi Weiping, Qin Zhongcheng. SpringerPlus,2016,5(1),1.
35 董国庆,方小伟,王振刚,等.中国矿业,2006(9),98.
36 Kim Nak-Kyung. Journal of Geotechnical and Geoenvironmental Enginee-ring,2003,129(12),1055.