低密度钢中有序析出相的研究进展

doi:10.11896/cldb.18120211

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (3967KB)
Export: BibTeX | EndNote (RIS)

Abstract With the growing popularity of the green manufacturing concept of “weight reduction, energy saving and carbon emission reduction”, the requirement for upgrading traditional steel materials is particularly urgent. The third generation of automobile steel has become a focus of increasing attention of research and development institutions and enterprises in various countries. As a new research and development direction of the third generation automotive steel, high strength and toughness low-density advanced steel is mainly designed by adding more light elements such as Al, Mn and Si elements into steel, which can significantly reduce the density of steel. The strength and plasticity of steel can be balanced by adjusting matrix structure and precipitated phase composition and morphology, so that it has high strength and plasticity and low density.
In the presentation, the lattice parameters and related properties of Kappa carbides, (Fe, Mn) Al, NiAl-type B2 phase, (Fe, Mn)₃Al-type DO₃ phase and β-Mn phase in low-density steels are introduced according to the composition and structure characteristics of Fe-Al, Fe-Mn-Al and Fe-Mn-Al-C low-density steels. Based on the latest research on low-density steels in China and overseas, the thermal and dynamic calculation of phase diagrams of low-density steels, the elemental partition and precipitation behavior (characteristics, morphology, size), the effect of precipitation on the microstructure evolution and strength-toughness mechanism of steels are summarized. Based on current research, the future research directions of high strength, high toughness and low density steels are prospected.

Key words： low-density steel ordered precipitate phase diagram crystal lattice elemental partition

Published: 30 September 2019

CLC number:

TG142.1

Fund:This work was financially supported by the National Natural Science Foundation of China (51674004).

About author:: Xiaofeng Zhang is an associate professor and graduate student instructor in School of Metallurgical Engineering of Anhui University of Technology. He received his B.E. degree from Wuhan University of Science and Technology in 1998 and received his Ph.D. degree in Material Processing Engineering, Huazhong University of Science and Technology, in July 2008. He worked in Anhui University of Technology in August of the same year. During his tenure, he conducted postdoctoral research at Nanjing University of Science and Technology from 2013 to 2016. His main research work is to control the structure and properties of advanced automotive steel materials. In recent years, more than 20 papers have been published in the field of advanced steel materials.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Xiaofeng
	LI Jiaxing
	WAN Yaxiong
	WU Xuejun
	HUANG Zhenyi

Cite this article:

ZHANG Xiaofeng,LI Jiaxing,WAN Yaxiong, et al. Research Progress of Ordered Precipitates in Low-density Steels[J]. Materials Reports, 2019, 33(23): 3979-3989.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18120211 OR http://www.mater-rep.com/EN/Y2019/V33/I23/3979

Rana R, Lahaye C, Ray R K. The Minerals, Metals Materials & Society,2014,66,1734.2 Chen S P, Rana R, Haldar A, et al. Progress in Materials Science,2017,89,345.3 Rana R. The Minerals, Metals Materials & Society,2014,66,1730.4 Zuazo I, Hallstedt B, Lindahl B, et al. The Minerals, Metals Materials & Society,2014,66(9),1747.5 Frommeyer G, Drewes E J, Engl B. Revue De Métallurgie-International Journal,2000,97(10),1245.6 Suh D W, Kim N J. Scripta Materialia,2013,68,337.7 Gutierrez-Urrutia I, Raabe D. Scripta Materialia,2013,68,343.8 Rana R, Liu C, Ray R K. Scripta Materialia,2013,68,354.9 Kimura Yoshisato, Handa Kazuyuki, Hayashi Kunio, et al. Intermetallics,2004,12,607.10 Lee Hyuk-Joong, Sohn Seok Su, Lee Sunghak, et al. Scripta Materialia,2013,68,339.11 Cheng Wei-Chun, Cheng Chih-Yao, Hsu Chia-Wei, et al. Materials Science & Engineering A,2015,642,128.12 Kim H, Suh D, Kim N. Science and Technology of Advanced Materials,2013,14(1),1.13 Gutierrez-Urrutia I, Raabe D. Materials Science and Technology,2014,30,1099.14 Bhattacharya Basudev. Metallurgical and Materials Transactions A,2012,43A,1747.15 Handa Kazuyuki,Kimura Yoshisato,Mishima Yoshinao. In: Materials Research Society Symposium Proceedings. Yokohama,2001,pp.5211.16 Moon Joonoh, Park Seong-Jun, Jang Jae Hoon, et al. Scripta Materialia,2017,127,97.17 Kim Hansoo. Scripta Materialia,2019,160,29.18 Song Hyejin, Yooa Jisung, Kim Sang-Heon, et al. Acta Materialia,2017,135,215.19 Bartlett L N, Van Aken D C, Medvedeva J, et al. Metallurgical and Materials Transactions A,2017,48A,5500.20 Zhou Naipeng, Song Renbo, Song Renfeng,et al. Steel Research International,2018,89,552.21 Chen Chinsung, Lin Chetong, Peng Peiwen, et al. Journal of Alloys and Compounds,2010,493,346.22 Sutou Yuji, Kamiya Naohide, Umino Reiko, et al. ISIJ International,2010,50(6),893.23 Zhang J L, Raabe D, Tasan C C. Acta Materialia,2017,141,374.24 Seol Jae-Bok, Raabe D, Choi P, et al. Scripta Materialia,2013,68,348.25 Xu Lixiong, Wu Huibin, Wang Xintian. Acta Metallurgica Sinica(English letters),2018,31,389.26 Yao M J, Dey P, Seol J B, et al. Acta Materialia,2016,106,229.27 Dey P, Nazarov R, Dutta B, et al. Physical Review B,2017,95,104108.28 Sohn Seok-Su, Song Hyejin, Suh Byeong-Chan, et al. Acta Materialia,2015,96,301.29 Choo Woong K, Han Kwan H. Metallurgical and Materials Transactions A,1985,16A,5.30 Li M C, Chang H, Kao P W, et al. Materials Chemistry and Physics,1999,59,96.31 Bo Sundman, Ikuo Ohnuma, Nathalie Dupin. Acta Materialia,2009,57,2896.32 Ha Min Chul, Koo Jin-Mo, Lee Jae-Kon, et al. Materials Science & Engineering A,2013,586,276.33 Nakamura H, Shiga M. Physica B,1997,237-238,453.34 Zheng Yibing, Wang Fen, Ai Taotao, et al. Journal of Alloys and Compounds,2017,710,581.35 Phan Anh Thu, Paek Min-Kyu, Kang Youn-Bae. Acta Materialia,2014,79,1.36 Kim Min-Su, Kang Youn-Bae. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry,2015,51,89.37 Risanti D D, Sauthoff G. Intermetallics,2005,13,1313.38 Kubaschewski O. Iron-Binary phase diagrams, 1st ed, Springer Verlag,Berlin,1982.39 Zheng Weisen, Mao Huahai, Lu Xiaogang, et al. Journal of Alloys and Compounds,2018,742(25),1046.40 Fartushna I, Bajenova I, Khvan A, et al. Journal of Alloys and Compounds,2018,735,1211.41 Umino R, Liu X J, Sutou Y, et al. Journal of Phase Equilibria and Diffusion,2006,27(1),54.42 Sohn S S, Lee S, Lee B J, et al. The Minerals, Metals Materials & Society,2014,66,1857.43 Zhang F, Huang W, Chang Y A. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry,1997,21(3),337.44 Zhang F, Chen S L, Chang Y A, et al. Intermetallics,1997,5(6),471.45 Huang W, Chang Y A. Intermetallics,1998,6(6),487.46 Dai Zhanhai, Lu Jintang, Kong Gang. Materials Review,2006,20(4),94(in Chinese).戴占海,卢锦堂,孔纲.材料导报,2006,20(4),94.47 Aireza Rahnama, Richard Dashwood, Seetharaman Sridhar. Computatio-nal Materials Science,2017,126,152.48 Ishida K, Ohtani H, Satoh N. et al. ISIJ International,1990,30(8),680.49 Rigaud Vincent, Daloz Dominique, Drillet Josée, et al. ISIJ Internatio-nal,2007,47(6),898.50 Kim C W, Terner M, Lee J H, et al. Journal of Alloys and Compounds,2019,775,554.51 Lehnhoff G R, Findley K O, de Cooman B C. Scripta Materialia,2014,92,19.52 Kim C W, Kwon S I, Lee B H, et al. Materials Science & Engineering A,2016,673,108.53 Heo Yoon-Uk, Song You-Young, Park Seong-Jun, et al. Metallurgical and Materials Transactions A,2012,43A,1731.54 Sarkar A, Sanyal S, Bandyopadhyay T K, et al. Materials Science & Engineering A,2017,703,205.55 Lee J W, Wu C C, Liu T F. Scripta Materialia,2004,50,1389.56 Medvedeva N I, Howell R A, Van Aken D C. Physical Review B,2010,81,2105.57 Liu Degang, Cai Minghui, Ding Hua, et al. Materials Science & Engineering A,2018,715,25.58 Lu W J, Zhang X F, Qin R S. Ironmaking and Steelmaking,2015,42(8),626.59 Lee Jaeeun, Park Siwook, Kim Hwangsun,et al. Metals and Materials International,2018,24,702.60 Hwang Si Woo, Ji Jung Hoon, Lee Eui Gil, et al. Materials Science & Engineering A,2011,528,5196.61 Lee Keunho, Park Seong-Jun, Moon Joonoh, et al. Scripta Materialia,2016,124,193.62 Chao C Y, Hwang C N, Liu T F. Scripta Materialia,1996 34(1),75.63 Liu T F, Chou J S, Wu C C. Metallurgical and Materials Transactions A,1990,21A,1891.64 Acselrad O, Kalashnikov I S, Silva E M, et al. Metal Science and Heat Treatment,2006,48(11-12),543.65 Hiroaki Ishii, Kenji Ohkubo, Seiji Miura, et al. Materials Transactions,2003,44(9),1679.66 Seo C H, Kwon K H, Choi K, et al. Scripta Materialia,2012,66,519. 67 Zhang Mingda, Cao Wenquan, Dong Han, et al. Materials Science & Engineering A,2016,654,193.68 Zhang Mingda, Xu Haifeng, Cao Wenquan, et al. ISIJ International,2016,56(5),861.69 Lin Chih-Lung, Chao Chuen-Guang, Juang Jenh-Yih, et al. Journal of Alloys and Compounds,2014,586,616.70 Jeong Junyeong, Lee Chan-Young, Park Il-Jeong, et al. Journal of Alloys and Compounds,2013,574,299.71 Kim Sang-Heon, Kim Hansoo, Kim Nack J. Nature,2015,518,77.72 Alireza Rahnama, Stephen Spooner, Seetharaman Sridhar. Materials Letters,2017,189,13.73 Lee Keunho, Park Seong-Jun, Lee Jaeeun, et al. Journal of Alloys and Compounds,2016,656,805.74 Chen X P, Xua Y P, Ren P, et al. Materials Science & Engineering A,2017,703,167.75 Wu Z Q, Ding H, An X.H, et al. Materials Science and Engineering A,2015,639,187.76 Wu Z Q, Ding H, Li H Y, et al. Materials Science & Engineering A,2013,584,150.77 Ha Min Chul, Koo Jin-Mo, Lee Jae-Kon, et al. Materials Science & Engineering A,2013,586,276.78 Morris D G, Munoz-Morris M A, Requejo L M. Materials Science & Engineering A,2007,460-461,163.79 Choi Kayoung, Seo Chang-Hyo, Lee Hakcheol, et al. Scripta Materialia,2010,63,1028.80 Bruer J, Grun A, Sommer F, et al. Metallurgical and Materials Transactions B,2001,32B(5),913.81 Choo W K, Kim J H, Yoon J C. Acta Materials,1997,45(12),4877.82 Lu W J, Zhang X F, Qin R S. Materials Letters,2015,138,96.83 Hong Seokmin, Lee Junghoon, Lee Byeong-Joo, et al. Materials Science & Engineering A,2013,587,85.84 Zhang Xiaofeng, Yang Hao, Leng Deping, et al. Journal of Iron and Steel Research, International,2016,23(9),963.85 Frommeyer G, Brüx U. Steel Research International,2006,77,627.86 Christian Haase, Christoffer Zehnder, Tobias Ingendahl, et al. Acta Materialia,2017,122,332.87 Yoo J D, Hwang S W, Park K T. Metallurgical and Materials Transactions A,2009,40,1520.88 Welsch E, Ponge D, Hafez Haghighat S M, et al. Acta Materialia,2016,116,188.