Si<sub>3</sub>N<sub>4</sub>泡沫陶瓷的制备过程影响因素及复合化研究进展

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4559KB)
Export: BibTeX | EndNote (RIS)

Abstract Si₃N₄ foam ceramics have great application potential in many fields such as heat insulation and high temperature catalyst carrier due to their low density, low thermal conductivity and excellent high temperature stability. In recent years, the academic community has intensively stu-died the effects of the preparation process of Si₃N₄ foam ceramics on their composition, porosity, pore size distribution and pore size, as well as mechanical properties, thermal conductivity and dielectric constant. In this paper, the influences of the type and particle size of ceramic powder, the composition and content of sintering aid, solid phase content, sintering heating rate and holding time on the microstructure and properties of Si₃N₄ foam ceramics are analyzed. And the paper can provide reference and guidance for the design of the new type Si₃N₄ foam ceramics. The latest research progress of the composite of Si₃N₄ foam ceramics with aerogel, resin, metal and other materials is introduced which has the advantage of complementary effect, and the prospects of related research fields are prospected.

Key words： silicon nitride foamed ceramic ceramic powder sintering additive solid phase content sintering system composite

Published: 05 July 2019

CLC number:

TB321

About author:: Feiyue Yang received his bachelor degree in enginee-ring from Harbin Institute of Technology in June 2017. He is currently pursuing his master’s degree in the College of Power Engineering,Naval University of Engineering under the supervision of Prof. Zichun Yang. His research has focused on silicon nitride foam ceramic refractory.Zichun Yang, professor and Ph.D. supervisor at the College of Power Engineering, Naval University of Engineering. In July 1989, he graduated from the Department of Marine Engineering of Naval University of Engineering. In September 1996, he obtained his Ph.D. in Solid Mechanics from Huazhong University of Science and Technology. From April 2013 to October 2013, he was a senior visiting scholar at the University of California, Irvine. He won one second prize of the National Science and Technology Progress Award, two first prizes and one second prize of the Army Science and Technology Progress Award. He was selected as one of the "New Century Excellent Talent Support Program" by the Ministry of Education, the "New Century Talent Project",and the Military High-level Scientific and Technological Innovation Talents Engineering Discipline Lea-ding Talent, etc. In recent years, he has published more than 100 research papers in journals such as Journal of the American Ceramic Society and Ceramics International.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Feiyue
	ZHAO Shuang
	CHEN Guobing
	CHEN Jun
	YANG Zichun

Cite this article:

YANG Feiyue,ZHAO Shuang,CHEN Guobing, et al. Research Progress of Influencing Factors of Preparation Process and Composite of Si₃N₄ Foamed Ceramics[J]. Materials Reports, 2019, 33(z1): 178-183.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2019/V33/Iz1/178

1 Bodišová K, Kašiarová M, Domanická M, et al. Ceramics International,2013,39(7),8355.
2 Kamperman M, Burns A, Weissgraeber R, et al. Nano Letters,2009,9(7),2756.
3 C,al kan F, Demir A, Tatli Z. Journal of Porous Materials,2013,20(6),1501.
4 Ohji T. Materials Science & Engineering A,2008,498(1-2),5.
5 Ma H S, Feng C, Chang J, et al. Acta Biomaterialia,2018,79,37.
6 Notario B, Pinto J, Rodriguez-Perez M A. Progress in Materials Science,2016,78-79,93.
7 Eswara P N, Bhaduri S B. Aerospace Materials and Material Technologies,2017,1,415.
8 Yao D X, Xia Y F, Zuo K H, et al. Journal of the European Ceramic Society,2014,34(15),3461.
9 Vakifahmetoglu C, Zeydanli D, Paolo Colombo. Materials Science & Engineering: R,2016,106,15.
10 Yang Z G, Yu J B, Li C J, et al. Transactions of the Indian Ceramic Society,2016,75(4),256.
11 Ohji T, et al. Engineered Ceramics: Current Status and Future Prospects,2015,pp.98.
12 Cree D, Pugh M. Journal of Materials Processing Technology,2010,210(14),1905.
13 Kathy L. Materials Science & Engineering: R,2015,97,23.
14 Garrna I, Reetza C, Brandesb N, et al. Journal of the European Ceramic Society,2004,24(3),579.
15 Zhang R B, Qu Q, Han B Y, et al. Materials Letters,2016,175,219.
16 Wakihara T, Yabuki H, Tatami J, et al. Journal of the American Ceramic Society,2008,91(10),3413.
17 Moraes E G, Colombo P. Materials Letters,2014,128,128.
18 Benedetti I, Aliabadi M H. Computational Materials Science,2013,67,249.
19 Xu Z Y, Wang B, Yang J F, et al. Journal of the American Ceramic So-ciety,2014,97(11),3392.
20 Liu T T, Jiang C F, Guo W. Journal of Rare Earths,2017,35(2),172.
21 Zoran K, Vladimir K. Journal of Materials Science,2012,47(2),535.
22 Yin L Y, Zhou X G, Yu J S, et al. Materials and Design,2016,89,620.
23 Park D, Kim H, Lim K T, et al. Materials Science & Engineering A,2005,405(1),158.
24 Xu J, Luo F, Zhu D M, et al. Materials Science & Engineering A,2008,488(1),167.
25 Krstic Z, Krstic D V. Journal of the European Ceramic Society,2011,31(9),1841.
26 Dai K, Shigeru A, Gen T, et al. International Journal of Applied Ceramic Technology,2012,9(2),229.
27 董薇, 汪长安, 尉磊, 等. 复合材料学报,2013,30(1),125.
28 Chakraborty P, Zhang Y, Tonks M R, et al. Computational Materials Science,2016,113,38.
29 Yu F L, Yang J F, Xue Y H, et al. Journal of the Chinese ceramic society,2008,36(8),1307.
30 Itoh H, Okamura H, Asanoma S, et al. Journal of the Ceramic Society of Japan,2013,121(5),401.
31 董薇, 汪长安, 尉磊, 等. 硅酸盐学报,2012,40(6),851.
32 Matsunaga C, Zhou Y, Kusano D, et al. International Journal of Applied Ceramic Technology,2017,14(6),1157.
33 Zoran K, Yu Z B, Vladimir K. Journal of Materials Science,2007,42(14),5431.
34 蒋强国, 古尚贤, 刘伟, 等. 人工晶体学报,2015,44(10),2869.
35 尉磊, 汪长安, 魏乔苑, 等. 硅酸盐学报,2011,39(7),1197.
36 李玉涛, 汪长安, 赵晨辰. 稀有金属材料与工程,2011,40(A1),540.
37 Coble R L, Kingery W D. Journal of the American Ceramic Society,1956,39(11),377.
38 Yin L Y, Zhou X G, Yu J S, et al. Journal of the European Ceramic Society,2013,33(7),1387.
39 Kim M, Park J, Lee H, et al. Materials Science & Engineering A,2005,408(1),85.
40 Moulson A J. Journal of Materials Science,1979,14(5),1017.
41 Ye F, Zhang J Y, Zhang H J, et al. Materials Scie-nce and Engineering: A,2010,527(24-25),6501.
42 Alveen P, Carolan D, Mc Namara D, et al. Computational Materials Scie-nce,2013,79,960.
43 Zhou Y, Ohji T, Hyuga H, et al. International Journal of Applied Cera-mic Technology,2014,11(5),872.
44 Sun Y Q, Zhao Z H, Li X L, et al. Ceramics International,2018,44(5),5233.
45 Ingvild B S, Astrid B, Tangstad Merete, et al. Journal of Crystal Growth,2010,312(16-17),2404.
46 Hong C Q, Han J C, Zhang X H, et al. Scripta Materialia, 2013, 68(8), 599.
47 Huang Y J, Gong L L, Pan Y L, et al. RSC Advances,2018,8(5),2350.
48 Ferkl P, Pokorny R, Bobák M, et al. Chemical Engineering Science,2013,97,50.
49 Sundarram S S, Li W. Polymer Engineering and Science,2013,53(9),1901.
50 Moore A L, Li S. Materials Today,2014,17(4),163.
51 He H, Fu R, Shen Y, et al. Composites Science and Technology,2007,67(11),2493.
52 Liu S C, Gao S X, Li W, et al. Ceramics International,2017,43(12),9348.
53 王星, 王玉璋. 材料导报:研究篇,2013,27(10),143.
54 Yin L Y, Zhou X G, Yu J S, et al. Composites Part A: Applied Science and Manufacturing,2016,90,626.
55 Ramesh C S, Keshavamurthy R, Channabasappa B H, et al. Materials Science and Engineering A,2009,502(1-2),99.
56 Martinaviius A, Van Landeghem H P, Danoix R, et al. Materials Letters,2017,189,25.
57 Zhuang Y L, Lin T S, Wang S J, et al. Journal of the European Ceramic Society,2017,37(10),3293.
58 Pasternak L, Paz Y. RSC Advances,2018,8(4),2161.
59 张杰, 方健, 刘春凤, 等. 中国专利,CN108640522A,2018.
60 Wang C, Wang H J, Fan X Y, et al. Journal of the European Ceramic Society,2015,35(6),1743.
61 Li W K, Chen F Y, Huang L, et al. Key Engineering Materials,2014,602-603,138.
62 Seiner H, Ramirez C, Koller M, et al. Materials and Design,2015,87,675.
63 Alveen P, Mc Namara D, Carolan D, et al. Computational Materials Scie-nce,2014,92,318.
64 Yang Y P, Li B, Zhang C R, et al. Materials Science and Engineering: A,2015,644,90.
65 Ramirez C, Leboren V, Rivadulla F, et al. Ceramics International,2016,42(9),11341.