薄规格取向硅钢中晶粒取向和尺寸对Goss晶粒异常长大的影响

doi:10.11896/j.issn.1005-023X.2018.04.020

Abstract
Figure/Table
References
Related Citation (9)

Download:

Full Text ( PDF ) (1924KB)
Export: BibTeX | EndNote (RIS)

Abstract The grain size distributions of {411}<148>, {111}<112> and {100}<025> in primary recrystallized and secondary recrystallized specimens in TG-CRGO steel were investigated by EBSD technique, and the effects of these three kinds of primary recrystallized grains on abnormal growth of Goss grains were analyzed. The results show that in primary recrystallized specimens, the average grain size order from large to small is {411}<148>, {100}<025> and {111}<112> grains. The abnormal growth process of the Goss grains could be extracted as follows: the {111}<112> grains are preferentially swallowed, then the {411}<148> grains, and finally near the {100}<025> grains and near the Brass grains. {411}<148> and {111}<112> grains would hinder the abnormal growth of Goss grains at preliminary stage. Therefore, it could be assumed that the residual island grains after final annealing mainly came from near {110}<112> grains or near {100} grains.

Key words： thin-gauge grain-orientation silicon steel (TG-CRGO) grain oriented grain size abnormal growth Goss texture

Published: 25 February 2018

CLC number:	TG156.21
	TG162.83

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HE Chengxu
	YANG Fuyao
	MENG Li
	LIU Yang
	GAO Jie
	MA Guang
	HAN Yu
	CHEN Xin

Cite this article:

HE Chengxu,YANG Fuyao,MENG Li, et al. Effect of Recrystallized Grain Sizes and Orientations on Abnormal Growth of Goss-oriented Grains in Thin-gauge Grain-oriented Silicon Steel[J]. Materials Reports, 2018, 32(4): 606-610.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.04.020 OR http://www.mater-rep.com/EN/Y2018/V32/I4/606

1 Zhu Chengyi, Chen Xianhong, Li Guangqiang, et al. The latest development of composition controlling in high quality grain-oriented silicon steel and its influence on magnetic properties[J].Materials Review A:Review Papers,2015,29(1):6(in Chinese).
朱诚意,陈先红,李光强,等.高品质取向硅钢成分控制的新进展及其对钢磁性能的影响[J].材料导报:综述篇,2015,29(1):6.
2 Yang Fuyao, Gu Lingyun, He Chengxu, et al. Research and prospect on the domain refinement of grain-oriented electrical steel[J].Materials Review A:Review Papers,2015,29(11):36(in Chinese).
杨富尧,古凌云,何承绪,等.取向硅钢细化磁畴技术的研究现状及展望[J].材料导报:综述篇,2015,29(11):36.
3 Xia Qiangqiang, Li Lijuan, Liu Lihua, et al. Research progress of the grain-oriented silicon steel production process[J].Materials Review A:Review Papers,2010,24(3):85(in Chinese).
夏强强,李莉娟,刘立华,等.取向硅钢生产工艺研究进展[J].材料导报:综述篇,2010,24(3):85.
4 Cheng Ling, Yang Fuyao, Ma Guang, et al. Development and application of high magnetic induction grain-oriented silicon steel for transformer[J].Materials Review A:Review Papers,2014,28(6):115(in Chinese).
程灵,杨富尧,马光,等.电力变压器用高磁感取向硅钢的发展及应用[J].材料导报:综述篇,2014,28(6):115.
5 Shilling J, Houze G L. Magnetic properties and domain structure in grain-oriented 3% Si-Fe[J].IEEE Transactions on Magnetics,1974,10(2):195.
6 Liu Gongtao, Yang Ping, Mao Weimin. Effect of final annealing atmosphere on secondary recrystallization behavior in thin gauge medium temperature grain oriented silicon steel[J].Acta Metallurgica Sinica,2016,52(1):25(in Chinese).
刘恭涛,杨平,毛卫民.高温退火气氛对薄规格中温取向硅钢二次再结晶行为的影响[J].金属学报,2016,52(1):25.
7 Nakashima S, Takashima K, Harase J. Effect of final thickness on secondary recrystallization of grain-oriented electrical steel produced by single-stage cold rolling process[J].Journal of The Japan Institute of Metals,1991,55(8):898.
8 Yan M Q, Qian H, Yang P, et al. Analysis of micro-texture during secondary recrystallization in a Hi-B electrical steel[J].Journal of Materials Science and Technology,2011,27(11):1065.
9 Imamura T, Shingaki Y, Hayakawa Y, et al. Effect of cold rolling reduction rate on secondary recrystallized texture in 3 Pct Si-Fe steel[J].Metallurgical and Materials Transactions A,2013,44A:1786.
10 Quadir M Z, Chang C S T, Duggan B J. Formation of the Goss texture in a thin foil experiment on Fe-3.2%Si[J].ISIJ International,2010,50(2):264.
11 Maazi N, Rouag N, Etter A L, et al. Influence of neighbourhood on abnormal Goss grain growth in Fe-3%Si steels: Formation of island grains in the large growing grain[J].Scripta Materialia,2006,55:641.
12 He Chengxu, Yang Fuyao, Yan Guochun, et al. Effect of normalizing on textures of thin-gauge grain-oriented silicon steel[J].Acta Metallurgica Sinica,2016,52(9):1063(in Chinese).
何承绪,杨富尧,严国春,等.常化处理对薄规格取向硅钢织构的影响[J].金属学报,2016,52(9):1063.
13 Nakamura S, Homma H. Micro-scale OIM study on the recrystallization process of cold rolled α-fiber single crystal[J].Materials Science Forum,2004,467-470:159.
14 Park J T, Ko H S, Joo H D, et al. Orientation of island small grains in grain oriented electrical steels[J].Materials Science Forum,2013,753:530.
15 Chen N, Zaefferer S, Lahn L, et al. Effect of topology on abnormal grain growth in silicon steel[J].Acta Materialia,2003,51:1755.