无机碱与季铵盐协同改性磷石膏的抗霉特性及物理力学性能研究

doi:10.11896/cldb.24010006

Abstract
Figure/Table
References
Related Citation (14)

Download:

Full Text ( PDF ) (12598KB)
Export: BibTeX | EndNote (RIS)

Abstract Phosphogypsum building materials in Southwest China are prone to mold, which affects product quality and human health, thus restricting its resource utilization. To control mold contamination, this paper starts from the mold biological structure and suitable survival environment, using Aspergillus niger as the source of infection, and uses the mold resistance grade method, ring of inhibition method, softening coefficient and compressive strength determination to assess the anti-mold performance and the physical and mechanical performance of the materials. Structural characterization and microscopic morphology analysis were carried out by XRD, FT-IR and SEM, and a synergistic model of inorganic alkaline materials and organic quaternary ammonium salts was constructed to explore the anti-mold mechanism. The results show that doping inorganic alkali alone can only enhance the short-term mold resistance, and the degree of improvement is regulated by pH, inorganic components, and moisture absorption performance. The synergistic modification of Ca(OH)₂ and quaternary ammonium salt can obtain excellent anti-mold effect and durability, but the doping of quaternary ammonium salt will deteriorate its softening coefficient and compressive strength, and the physical and mechanical properties of the specimens were better when compounded with 10% Ca(OH)₂ and 0.1% CTAB by mass fraction. Ca(OH)₂ and quaternary ammonium salts synergistically enhance the anti-mold effect lies in the fact that OH^- and quaternary ammonium ions are stably attached to the surface of CaSO₄·2H₂O crystals by hydrogen bonding and electrostatic attraction, respectively, and after the former denatures the proteins of the biofilm system of mold spores, the latter intensifies the destruction of phospholipid bilayer, which speeds up the inactivation of the mold spores and improves the anti-mold property.

Key words： phosphogypsum synergistic antifungal quaternary ammonium salt circle of inhibition softening coefficient

Published: 10 February 2025 Online: 2025-02-05

CLC number:

TB34

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	FANG Shuangming
	FU Juan
	LUO Jie
	PENG Zhu
	LI Ziling
	CHENG Jinke

Cite this article:

FANG Shuangming,FU Juan,LUO Jie, et al. Study on the Anti-mold Characteristics and Physical and Mechanical Properties of Phosphogypsum Modified Synergistically by Inorganic Alkali and Quaternary Ammonium Salt[J]. Materials Reports, 2025, 39(3): 24010006-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.24010006 OR http://www.mater-rep.com/EN/Y2025/V39/I3/24010006

1 Han F, Fang D, Feng Y, et al. Separation and Purification Technology, 2023, 323, 124358.
2 Zhang J, Xie W M, Dong X B, et al. Materials Reports, 2023, 37(16), 167 (in Chinese).
张峻, 解维闵, 董雄波, 等. 材料导报, 2023, 37(16), 167.
3 Chernysh Y, Yakhnenko O, Chubur V, et al. Applied Sciences, 2021, 11(4), 1575.
4 Chen M, Liu P, Kong D, et al. Coatings, 2022, 12(12), 1918.
5 Li Y, Dai S, Zhang Y, et al. Journal of Applied Biomaterials & Functional Materials, 2018, 16, 81.
6 Li u W S , Li L J, Zhou X T. Materials Research Express, 2023, 10(3), 35504.
7 Hoang C P, Kinney K A, Corsi R L, et al. International Biodeterioration & Biodegradation, 2010, 64(2), 104.
8 Viitanen H, Vinha J, Salminen K, et al. Journal of Building Physics, 2010, 33(3), 201.
9 Andersen B, Frisvad J C, Sondergaard I, et al. Applied and Environmental Microbiology, 2011, 77(12), 4180.
10 Hu M Y, Wang H Y, Liu Z H, et al. Materials Reports, 2020, 34 (14), 14051 (in Chinese).
胡明玉, 王红英, 刘子航, 等. 材料导报, 2020, 34(14), 14051.
11 Johansson P, Ekstrand-Tobin A, Svensson T, et al. International Biodeterioration & Biodegradation, 2012, 73, 23.
12 Misnikov O, Ivanov V. E3S Web of Conferences, 2017, 15, 1017.
13 Gómez-Ortíz N, De la Rosa-García S, González-Gómez W, et al. ACS Applied Materials & Interfaces, 2013, 5(5), 1556.
14 Do J, Song H, So H, et al. Cement and Concrete Research, 2005, 35(2), 371.
15 Jerónimo A, Camões A, Aguiar B, et al. Applied Surface Science, 2019, 483, 1192.
16 Jerónimo A, Soares C, Aguiar B, et al. Construction and Building Materials, 2020, 255, 119368.
17 De Muynck W, De Belie N, Verstraete W. Journal of Applied Microbiology, 2010, 108(1), 62.
18 Shinde D B, Pawar R, Vitore J, et al. Polymers for Advanced Technologies, 2021, 32(11), 4204.
19 Saidin S, Jumat M A, Mohd Amin N A A, et al. Materials Science and Engineering:C, 2021, 118, 111382.
20 Peters R A, Wilson T H. Biochimica et Biophysica Acta, 1952, 9, 310.
21 Yang Y, Reipa V, Liu G, et al. ACS Applied Materials & Interfaces, 2018, 10(10), 8566.
22 Liu N, Chu D, Chen X, et al. Coatings, 2023, 13(4), 745.
23 Almeida E S T, Gorup L F, de Araújo R P, et al. Food and Bioprocess Technology, 2020, 13(12), 2065.
24 Zhang H, Chai W, Cao Y. Applied Surface Science, 2022, 576, 151834.
25 Gow N A R, Latge J, Munro C A. Microbiology Spectrum, 2017, 5(3), 1.