镁合金轧制边裂损伤模型的研究进展

doi:10.11896/cldb.23110051

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3762KB)
Export: BibTeX | EndNote (RIS)

Abstract The edge cracks seriously affect the formability of magnesium alloy sheet in rolling production, and can not be ignored in magnesium alloy rol-ling. It is necessary to study the generation mechanism and damage model of magnesium alloy rolling edge crack to achieve accurate da-mage analysis of edge crack. Although there are many researches have been published on the analysis model of magnesium alloy edge crack damage, there are few papers summarizing the available data. In this summary, the mechanism of edge crack damage in magnesium alloy rolling is briefly described. The research progress of the definition and formation, the influencing factors, the damage control of edge crack damage are analyzed. The analysis models of magnesium alloy rolling edge crack damage based on continuum damage mechanics, continuous damage mechanics and mesoscopic damage mechanics are summarized, which provides reference for improving the theoretical system of magnesium alloy rolling process and improving the rolling process of magnesium alloy. Finally, the existing problems in the research of edge crack damage of magnesium alloy rolling are pointed out, and the future research direction is prospected.

Key words： magnesium alloy sheet rolling edge cracking damage model

Published: 25 December 2024 Online: 2024-12-20

CLC number:

TG339

Fund:National Natural Science Foundation of China (52275356).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LU Huiyang
	LIN Jinbao
	LIU Huimin
	WANG Bingquan
	LI Yihao
	CHEN Xun

Cite this article:

LU Huiyang,LIN Jinbao,LIU Huimin, et al. Research Progress of Rolling Edge Crack of Magnesium Alloy Sheet[J]. Materials Reports, 2024, 38(24): 23110051-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23110051 OR http://www.mater-rep.com/EN/Y2024/V38/I24/23110051

1 Zhao L J, Ma L F, Han Y Z, et al. Materials Reports, 2020, 34(21), 21135(in Chinese).
赵磊杰, 马立峰, 韩廷状, 等. 材料导报, 2020, 34(21), 21135.
2 Sun H F, Liang S J, Wang E D. Transactions of Nonferrous Metals Society of China, 2009, 19(s2), s349.
3 Tian J, Lu H H, Zhang W G, et al. Journal of Magnesium and Alloys, 2022, 10(8), 2193.
4 Liu Z C, Zheng X P, Li H B, et al. Materials for Mechanical Engineering, 2023, 47(3), 85 (in Chinese).
刘泽成, 郑小平, 李红斌, 等. 机械工程材料, 2023, 47(3), 85.
5 Jia W T, Xu S, Le Q C, et al. Materials & Design, 2016, 106, 120.
6 Zhang D F, Dai Q W, Hu Y B, et al. Journal of Materials Engineering, 2009(10), 85 (in Chinese).
张丁非, 戴庆伟, 胡耀波, 等. 材料工程, 2009(10), 85.
7 Kim W Y, Kim W J. Materials Science & Engineering:A, 2014, 594(2), 189.
8 Shang X Q, Zhang H M, Wang L Y, et al. International Journal of Plasticity, 2021, 144, 103040.
9 Xu S N, Qian L Y, Sun C Y, et al. Journal of Materials Research and Technology, 2023, 27, 7368.
10 Dai Q W. Study on rolling of Mg alloy and mechanism of edge cracks. Ph. D. Thesis, Chongqing University, China, 2011 (in Chinese).
戴庆伟. 镁合金轧制变形及边裂机制研究. 博士学位论文, 重庆大学, 2011.
11 Zhang D F, Dai Q W, Fang L, et al. Transactions of Nonferrous Metals Society of China, 2011, 21(5), 1112.
12 Zhang D F, Dai Q W, Hu Y B, et al. Journal of Materials Engineering, 2011(1), 92(in Chinese).
张丁非, 戴庆伟, 胡耀波, 等. 材料工程, 2011(1), 92.
13 Sun Q. Research on damage and fracture behavior of steel strip during rolling process. Ph. D. Thesis, East China University of Science and Technology, China, 2016 (in Chinese).
孙权. 带钢轧制过程损伤与开裂行为的研究. 博士学位论文, 华东理工大学, 2016.
14 Wang X Y. Research of rolling stress state and edge crack damage of AZ31 magnesium alloy. Master’s Thesis, Taiyuan University of Science and Technology, China, 2019 (in Chinese).
王心怡. AZ31镁合金轧制应力状态分析及边裂损伤研究. 硕士学位论文, 太原科技大学, 2019.
15 Cockroft M G, Latham D J. Ductility and the Workability of Metals, 1968, 96, 33.
16 Lu S S, Bao R, Zhang T, et al. Frattura ed Integrita Strutturale, 2016, 10(35), 74.
17 Fan Q H, Gao H W, Chu Z B. Journal of Taiyuan University of Technology, 2023, 54(2), 225 (in Chinese).
范沁红, 高宏伟, 楚志兵. 太原理工大学学报, 2023, 54(2), 225.
18 Kweon S. Mechanics Research Communications, 2015, 63, 13.
19 Huang Z Q, Huang Q X, Wei J C, et al. Rare Metal Materials and Engineering, 2016, 45(6), 1461 (in chinese).
黄志权, 黄庆学, 韦建春, 等. 稀有金属材料与工程, 2016, 45(6), 1461.
20 Huang Z Q, Wei J C, Ma L F, et al. Rare Metal Materials and Engineering, 2018, 47(6), 1926 (in Chinese).
黄志权, 韦建春, 马立峰, 等. 稀有金属材料与工程, 2018, 47(6), 1926.
21 Xie H B, Jiang Z Y, Yuen W Y D. Tribology International, 2011, 44(9), 971.
22 Guo F, Zhang D F, Yang X S, et al. Materials Science and Engineering: A, 2014, 607, 383.
23 Zhu S Q, Yan H G, Chen J H, et al. Scripta Materialia, 2010, 63(10), 985.
24 Kim W J, Hong S I, Lee J M, et al. Materials Science and Engineering: A, 2013, 559, 325.
25 Zhi C C, Ma L F, Huang Q X, et al. Journal of Materials Processing Technology, 2018, 255, 333.
26 Toribio J, González B, Matos J C. Engineering Fracture Mechanics, 2010, 77(11), 2024.
27 Dreyer C E, Chiu W V, Wagoner R H, et al. Journal of Materials Processing Technology, 2010, 210(1), 37.
28 He J J, Mao Y, Lu S L, et al. Materials Science and Engineering: A, 2019, 760, 174.
29 Pekguleryuz M, Celikin M, Hoseini M, et al. Journal of Alloys and Compounds, 2012, 510(1), 15.
30 Zhang H L, Meng M, Yang X, et al. Journal of Materials Research and Technology, 2023, 22, 2093.
31 Han X Z, Hu L, Jia D Y, et al. Transactions of Nonferrous Metals Society of China, 2023, 33(8), 2351.
32 Liu J L, Qi Y Y, Wang T, et al. Materials Reports A: Review Papers, 2020, 34(7), 7138 (in Chinese).
刘江林, 齐艳阳, 王涛, 等. 材料导报:综述篇, 2020, 34(7), 7138.
33 Huang Z Q, Huang Q X, Ma L F, et al. Hot Working Technology, 2014, 43(17), 1(in Chinese).
黄志权, 黄庆学, 马立峰, 等. 热加工工艺, 2014, 43(17), 1.
34 Liu Q, Feng B, Yang H, et al. Journal of Materials Research and Technology, 2022, 19, 5037.
35 Jia W T, Le Q C, Tang Y, et al. Journal of Materials Science & Technology, 2018, 34(11), 2069.
36 Huang Z Q, Qi C L, Yang G W, et al. Journal of Materials Engineering and Performance, 2020, 29, 3906.
37 Ma L F, Pang Z N, Huang Q X, et al. Rare Metal Materials and Engineering, 2014, 43(S1), 387 (in Chinese).
马立峰, 庞志宁, 黄庆学, 等. 稀有金属材料与工程, 2014, 43(S1), 387.
38 Ma L F, Pang Z N, Ma Z Y, et al. Journal of Materials Science and Engineering, 2014, 32(5), 665 (in Chinese).
马立峰, 庞志宁, 马自勇, 等. 材料科学与工程学报, 2014, 32(5), 665.
39 Ning F K, Zhou X, Le Q C, et al. Materials Today Communications, 2020, 24, 2352.
40 Huang Z Q, Huang Q X, Wei J C, et al. Journal of Materials Processing Technology, 2017, 246, 85.
41 Yang H Z, Nie H H, Liu Q F, et al. Hot Working Technology, 2024(10), 133(in Chinese).
杨汉章, 聂慧慧, 刘群峰, 等. 热加工工艺, 2024(10), 133.
42 Cockcroft M G, Latham D J. Journal of Engineering Materials and Technology, 1968, 96, 33.
43 Freudenthal A M. The inelastic behavior of metals, Wiley, New York, 1950.
44 Oyane M, Sato T, Okimoto K, et al. Journal of Mechanical Working Technology, 1980, 4(1), 65.
45 Zhang D F, Dai Q W, Fang L, et al. Transactions of Nonferrous Metals Society of China, 2011, 21(5), 1112.
46 Wei J C, Huang Q X, Huang Z Q, et al. Rare Metal Materials and Engineering, 2018, 47(2), 652(in Chinese).
韦建春, 黄庆学, 黄志权, 等. 稀有金属材料与工程, 2018, 47(2), 652.
47 Nie H H, Zheng L W, Tian J, et al. Journal of Mechanical Engineering, 2021, 57(8), 146(in Chinese).
聂慧慧, 郑留伟, 田静, 等. 机械工程学报, 2021, 57(8), 146.
48 Huang Z Q, Qi C L, Zou J C, et al. Journal of Magnesium and Alloys, 2023, 11(6), 2151.
49 Ning F K, Jia W T, Hou J, et al. Materials Research Express, 2018, 5, 056528.
50 Qi Y Y, Liu J L, Wang T. et al. Chinese Journal of Rare Metals, 2022, 46(7), 873(in Chinese).
齐艳阳, 刘江林, 王涛, 等. 稀有金属材料与工程, 2022, 46(7), 873.
51 Nobutsune H, Yoshihara M, Sekine T, et al. Tetsu-to-Hagane, 1981, 67(15), 241.
52 Jia W T, Ma L F, Le Q C, et al. Journal of Alloys and Compounds, 2019, 783, 863.
53 Jia W T, Ma L F, Jiao M Y, et al. Journal of Materials Research and Technology, 2020, 9(3), 4773.
54 Yang X, Zhang Z M, Meng M, et al. Journal of Materials Research and Technology, 2022, 18, 255.
55 Chen X M, Lu Y F, Ning M T, et al. Materials Science and Engineering: A, 2023, 871, 144857.
56 Jia W T, Wang L J, Ma L F, et al. Journal of Materials Research and Technology, 2022, 17, 2047.
57 Zheng L H, Wang Z J, Meng B, et al. International Journal of Plasticity, 2023, 164, 0749.
58 McClintock F A. Journal of applied mechanics, 1968, 35(2), 363.
59 Rice J R, Tracey D M. Journal of the Mechanics and Physics of Solids, 1969, 17(3), 201.
60 Gurson A L. Journal of Engineering Materials and Technology, 1977, 99(1), 2.
61 Wang R Z, Chen Z H, Li Y J, et al. Hot Working Technology, 2013, 42(17), 73 (in Chinese).
王瑞泽, 陈章华, 李雨洁, 等. 热加工工艺, 2013, 42(17), 73.
62 Wang R Z, Chen Z H, Zang Y. Journal of University of Science and Technology Beijing, 2014, 36(4), 459 (in Chinese).
王瑞泽, 陈章华, 臧勇, 等. 北京科技大学学报, 2014, 36(4), 459.
63 Zhou X, Wen D, Shen M Q, et al. Acta Aeronautica et Astronautica Sinica, 2018, 39(5), 218 (in Chinese).
周霞, 文冬, 沈梦祺, 等. 航空学报, 2018, 39(5), 218.
64 Zhang S S. Finite element simulation and experimental study of magnesium alloy rolling based on electromagnetic induction heating. Master’s Thesis, Yanshan University, China, 2023 (in Chinese).
张帅帅. 基于电磁感应加热的镁板轧制有限元模拟和实验. 硕士学位论文, 燕山大学, 2023.
65 Shi L Q. Study on suppression of edge crack of magnesium alloy AZ31 room temperature rolling with electric pulse. Master’s Thesis, Yanshan University, China, 2023 (in Chinese).
史立强. 电脉冲辅助镁合金AZ31室温轧制边裂抑制规律性的研究. 硕士学位论文, 燕山大学, 2023.
66 Yan Y X, Sun Q, Chen J J, et al. Journal of Materials Processing Technology, 2013, 213(4), 924.
67 Sun Q, Chen J J, Li X X, et al. Procedia Materials Science, 2014, 3, 1632.
68 Sun Q, Zan D Q, Chen J J, et al. Theoretical and Applied Fracture Mechanics, 2015, 80(B), 259.
69 Zhao C C, Wang T, Li Z X, et al. International Journal of Mechanical Sciences, 2023, 241, 107961.
70 Lemaitre J. Journal of Engineering Materials and Technology, 1985, 107(1), 83.
71 Zhang K, Badreddine H, Yue Z M, et al. International Journal of Solids and Structures, 2021, 217-218, 155.
72 Nezhad S M S, Aboutalebi H F. Engineering Failure Analysis, 2022, 139, 106509.
73 Bonora N. Engineering Fracture Mechanics, 1997, 58(1-2), 11.
74 Oh S I, Kobayashi S. Journal of Engineering for Industry, 1976, 98(3), 800.
75 Tetsuro Inoue. International Journal of Solids and Structures, 1996, 33(26), 3906.
76 Brozzo P, DeLuca B, Rendina R. In: Proceedings of the Seventh Biennial Conference of the International Deep Drawing Research Group. Milan, Italy, 1972.
77 Argon A S, Im J, Safoglu R. Metallurgical transactions A, 1975, 6, 825.