稀土合金化对高碳高合金工模具钢的影响

doi:10.11896/cldb.23100036

Abstract
Figure/Table
References
Related Citation (1)

Download:

Full Text ( PDF ) (17648KB)
Export: BibTeX | EndNote (RIS)

Abstract The coarse and uneven eutectic carbides in ledeburiteare the unfavorable factors that seriously affect the service performance of high-carbon high-alloy tool and die steels. Except for changing the solidification cooling conditions to control the eutectic carbides, rare earth alloying method is studied extensively at home and abroad to improve the morphology and distribution of eutectic carbides, consequently to enhance the hot working performance and toughness of high-carbon high-alloy tool and die steels. This paper briefly introduces the status of production processes for high-carbon high-alloy tool and die steels, then discusses the current research advancements in rare earth alloying, and then summarizes the existed researches on the rare earth elements addition technology and their optimal addition amount. The effects of rare earth alloying on the microstructures and properties of high-carbon high-alloy tool and die steels are emphatically demonstrated. Finally, the industrial production and application of rare earth high-carbon high-alloy tool and die steels are prospected.

Key words： high-carbon high-alloy tool and die steels production process rare earth alloying eutectic carbides

Published: 10 December 2024 Online: 2024-12-10

CLC number:

TG142.71

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DAI Yuheng
	MAN Tinghui
	LI Peng
	XU Leqian
	LIU Yu
	WEI Xicheng

Cite this article:

DAI Yuheng,MAN Tinghui,LI Peng, et al. Effect of Rare Earth Alloying on High-carbon High-alloy Tool and Die Steel[J]. Materials Reports, 2024, 38(23): 23100036-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23100036 OR http://www.mater-rep.com/EN/Y2024/V38/I23/23100036

1 Cui K. Composition, microstructure and properties of steels (2nd edition) Volume 4: Tool and die steels, Science Press, China, 2019, pp.973 (in Chinese).
崔崑. 钢的成分、组织与性能(第二版)第四分册:工模具钢, 科学出版社, 2019, pp.973.
2 Qin K. Mold Industry, 2012, 38(11), 74 (in Chinese).
秦珂. 模具工业, 2012, 38(11), 74.
3 Huang W X, Fu J X. Secondary refining and oxide metallurgy in iron and steel smelting, Taipei Heji Book Publishing House, China, 2012, pp.278.
黄文星, 付建勋. 钢铁冶炼之二次精炼与氧化物冶金, 台北合记图书出版社, 2012, pp.278.
4 Zhang D P, Tang D R, Chen Y G, et al. Chinese Rare Earths, 2009, 30(5), 70 (in Chinese).
张德平, 唐定骧, 陈云贵, 等. 稀土, 2009, 30(5), 70.
5 Xu G L, Huang P, Sun X, et al. Materials China, 2020, 39(1), 70 (in Chinese).
徐桂丽, 黄鹏, 孙溪, 等. 中国材料进展, 2020, 39(1), 70.
6 Yao J, Zhu X D, Liu Y, et al. Special Steel, 2022, 43(6), 66 (in Chinese).
姚健, 朱喜达, 刘宇, 等. 特殊钢, 2022, 43(6), 66.
7 Wu L Z. Hebei Metallurgy, 2015 (11), 1 (in Chinese).
吴立志. 河北冶金, 2015 (11), 1.
8 Yao J, Man T H, Liu Y, et al. China Metallurgy, 2023, 33(3), 77 (in Chinese).
姚健, 满廷慧, 刘宇, 等. 中国冶金, 2023, 33(3), 77.
9 Man T H, Dai Y H, Yao J, et al. Journal of Materials Research and Technology, 2023, 26, 8254.
10 Wei Q, Zhang Q L, Qian L, et al. Iron & Steel, 1964 (8), 34 (in Chinese).
魏其恩, 张庆亮, 钱励, 等. 钢铁, 1964 (8), 34.
11 Cai S X. Iron & Steel, 1966 (5), 33 (in Chinese).
蔡少学. 钢铁, 1966 (5), 33.
12 He E S, Jiang H S, Wang F Z. Iron & Steel, 1981 (4), 1 (in Chinese).
何恩赏, 蒋亨胜, 王福忠. 钢铁, 1981 (4), 1.
13 Luo D, Xing G H, Zou H L, et al. Acta Metallica Sinica, 1983 (4), 121 (in Chinese).
罗迪, 邢国华, 邹惠良, 等. 金属学报, 1983 (4), 121.
14 Zhang Y F. Hunan Metallurgy, 1990 (1), 48 (in Chinese).
张永锋. 湖南冶金, 1990 (1), 48.
15 Ye C C, Zhang S L, Liang T S, et al. Special steel, 1987 (4), 53 (in Chinese).
叶财超, 张盛霖, 梁铁生, 等. 特殊钢, 1987 (4), 53.
16 Qiu L Y, Pan B L. Iron and Steel, 1996 (2), 34 (in Chinese).
丘立一, 潘保良. 钢铁, 1996 (2), 34.
17 Li Yanjun, Jiang Q C, Zhao Y G, et al. Journal of the Chinese Society of Rare Earths, 1999 (2), 54 (in Chinese).
李彦军, 姜启川, 赵宇光, 等. 中国稀土学报, 1999 (2), 54.
18 Boccalini Jr, Corrêa A V O. Materials Science and Technology, 1999, 15(6), 621.
19 Song Y P, Li B Z, Zhu J Z, et al. Journal of Iron and Steel Research, 2001 (6), 31 (in Chinese).
宋延沛, 李秉哲, 朱景芝, 等. 钢铁研究学报, 2001 (6), 31.
20 Fu H G, Du J M, Jiang Z Q, et al. Journal of rare earth, 2003, 21(6), 664.
21 Chaus A S. Metal Science & Heat Treatment, 2004, 46(9-10), 415.
22 Jiang Z Q, Feng X L, Fu H G. Journal of Aeronautical Materials, 2007 (1), 6 (in Chinese).
蒋志强, 冯锡兰, 符寒光. 航空材料学报, 2007 (1), 6.
23 Wang M J, Mu S M, Sun F F, et al. Journal of Rare Earth, 2007, 25(4), 490.
24 Feng W W. Research on carbide properties of nitrogen and rare earth M2 high-speed steel. Ph. D. Thesis, Yanshan University, China, 2013(in Chinese).
冯唯伟. 含氮与稀土M2高速钢碳化物特性研究. 博士学位论文, 燕山大学, 2013.
25 Liu Q X, Lu D P, Lu L, et al. Heat Treatment Technology and Equipment, 2013, 34(5), 49 (in Chinese).
刘秋香, 陆德平, 陆磊, 等. 热处理技术与装备, 2013, 34(5), 49.
26 Hamidzadeh M A, Meratian M, Saatchi A. Materials Science and Engineering: A, 2013, 571, 193.
27 Qu M G, Wang Z H, Li H, et al. Journal of Rare Earths, 2013, 31(6), 628.
28 Zhou X F. Journal of Southeast University(English Edition), 2014, 30(4), 445.
29 Hufenbach J, Helth A, Lee M H, et al. Materials Science and Enginee-ring: A, 2016, 674, 366.
30 Zeli K, Burja J, McGuiness P J, et al. Scientific Reports, 2018, 8(1), 9233.
31 Yin F, Wang L, Xiao Z, et al. Journal of Rare Earth, 2020, 38(9), 1030.
32 Du S M. Iron Steel Vanadium Titanium, 2020, 41(1), 125 (in Chinese).
杜思敏. 钢铁钒钛, 2020, 41(1), 125.
33 Yang W Y, Xie Z B, Wang K, et al. HeBei Metallurgy, 2021(11), 32 (in Chinese).
杨文义, 谢志彬, 王凯, 等. 河北冶金, 2021 (11), 32.
34 Yang B, Xiong X, Liu R, et al. Journal of Materials Research and Technology, 2021, 14, 1275.
35 Ding Y, Yu J K. Hot Working Technology, 2022, 51(23), 15 (in Chinese).
丁雨, 于吉鲲. 热加工工艺, 2022, 51(23), 15.
36 Liu W F. Research on carbide control and structural forming of aeroengine high temperature bearing steel. Ph.D. Thesis, University of Science and Technology of China, China, 2022 (in Chinese).
刘威峰. 航空发动机高温轴承钢碳化物控制与构筑成形研究. 博士学位论文, 中国科学技术大学, 2022.
37 Zheng D L, Ma G J, Li J, et al. Journal of Materials Research and Technology, 2023, 24, 8252.
38 Sun S H, Yu H. Special Steel Technology, 2019, 25(3), 27 (in Chinese).
孙慎宏, 于红. 特钢技术, 2019, 25(3), 27.
39 Zhu J, Huang H Y, Xie J X. Journal of Iron and Steel Research, 2017, 29(7), 513 (in Chinese).
朱健, 黄海友, 谢建新. 钢铁研究学报, 2017, 29(7), 513.
40 Li D Z, Wang P, Chen X Q, et al. Nature Materials, 2022, 21, 1137.
41 谢志彬, 梁敬斌, 杨文义, 等. 中国专利, CN114015926A, 2022-02-08.
42 Jia C C, Zhang W L, Hu B T, et al. Powder Metallurgy Technology, 2017, 35(6), 416 (in Chinese).
贾成厂, 张万里, 胡彬涛, 等. 粉末冶金技术, 2017, 35(6), 416.
43 Liu B W. Powder metallurgy high-speed steel alloy composition and performance optimization. Ph. D. Thesis, University of Science and Technology Beijing, China, 2020 (in Chinese).
刘博文. 粉末冶金高速钢合金成分及性能优化. 博士学位论文, 北京科技大学, 2020.
44 Long Q, Wu Y J, Ling M, et al. Steelmaking, 2018, 34(1), 57 (in Chinese).
龙琼, 伍玉娇, 凌敏, 等. 炼钢, 2018, 34(1), 57.
45 Wang H P, Chen D. Powder Metallurgy Technology, 2016, 34(4), 300 (in Chinese).
王辉平, 陈鼎. 粉末冶金技术, 2016, 34(4), 300.
46 Deng C H, Chen Y, Gong T Z, et al. Chinese Journal of Materials Research, 2023, 37(12), 915(in Chinese).
邓朝辉, 陈云, 巩桐兆, 等. 材料研究学报, 2023, 37(12), 915.
47 Hu Q. Microstructure and properties of short-process rare earth modified electroslag remelted recycled high-speed steel. Ph. D. Thesis, Huazhong University of Science and Technology, China, 2019(in Chinese).
胡强. 短流程稀土改性电渣重熔再生高速钢组织及性能. 博士学位论文. 华中科技大学, 2019.
48 Zhang Z. Magnesium/rare earth refined high-speed tool steel solidification research. Master's Thesis, Anhui University of Technology, China, 2019(in Chinese).
张章. 镁/稀土细化高速工具钢凝固组织的研究. 硕士学位论文, 安徽工业大学, 2019.
49 Zhu S L, Cao H Z, Hu W H, et al. Rare Metal Materials and Engineering, 2014, 43(8), 1983 (in Chinese).
朱施利, 曹华珍, 胡文豪, 等. 稀有金属材料与工程, 2014, 43(8), 1983.
50 Wang M J, Chen L, Wang Z X, et al. Transactions of Materials and Heat Treatment, 2012, 33(3), 57 (in Chinese).
王明家, 陈雷, 王子兮, 等. 材料热处理学报, 2012, 33(3), 57.
51 Wang D. Effect of rare earth on microstructure and properties of M35 high speed steel. Master's Thesis, Southeast University, China, 2005(in Chinese).
王栋. 稀土对M35高速钢组织和性能的影响. 硕士学位论文, 东南大学, 2005.
52 Li Y B, Cheng X N, Zhu R Y. Foundry Technology, 2011, 32(12), 1677 (in Chinese).
李亚波, 程晓农, 朱儒燕. 铸造技术, 2011, 32(12), 1677.
53 Zhou Xuefeng. Research on carbide control technology and production process of M2 high speed steel. Ph.D.Thesis, Southeast University, China, 2011(in Chinese).
周雪峰. M2高速钢碳化物控制技术和生产工艺研究. 博士学位论文, 东南大学, 2011.
54 Fu H G, Xing J D. Journal of Aeronautical Materials, 2003(1), 7 (in Chinese).
符寒光, 邢建东. 航空材料学报, 2003(1), 7.