选择性激光烧结用聚合物复合材料的研究进展

doi:10.11896/cldb.23020110

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (51229KB)
Export: BibTeX | EndNote (RIS)

Abstract Selective laser sintering (SLS) is an important additive manufacturing (3D printing) technology, and its raw materials are mainly powder materials, among which polymer materials are the earliest and most widely used materials in SLS technology. With the increasing demand for various performance requirements of SLS products, polymer materials used in SLS technology are currently unable to meet their molding needs due to their limited variety and single performance. At present, research on the preparation of composite materials through composite modification of polymer materials has attracted the interest of researchers in this field, as it can not only improve the performance of SLS formed products but also enrich the variety of SLS materials. In this paper, the composite modification methods of polymer materials used in SLS are introduced, the characteristics of various methods and the research status at home and abroad are elaborated, and the future research direction of polymer composite materials used in SLS is prospected.

Key words： 3D printing selective laser sintering polymer composites

Published: 10 October 2024 Online: 2024-10-23

CLC number:

TH145.4

Fund:Central Government Guides Local Science and Technology Development Fund Projects (2021JH6/10500245).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHOU Yingwei
	FAN Yupeng
	YU Ruilong
	TAN Rui
	MA Yueting
	WANG Pengwei
	YIN Shaokui

Cite this article:

ZHOU Yingwei,FAN Yupeng,YU Ruilong, et al. Research Progress of Polymer Composites for Selective Laser Sintering[J]. Materials Reports, 2024, 38(19): 23020110-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23020110 OR http://www.mater-rep.com/EN/Y2024/V38/I19/23020110

1 Werken N V D, Tekinalp H, Khanbolouki P, et al. Additive Manufacturing, 2020, 31, 100962.
2 Lupone F, Padovano E, Casamento F, et al. Materials, 2021, 15(1), 183.
3 Li Z C, Gan X P, Fei G X, et al. Polymer Materials Science & Engineering, 2017, 33(10), 170 (in Chinese).
李志超, 甘鑫鹏, 费国霞, 等. 高分子材料科学与工程, 2017, 33(10), 170.
4 Gong X D. Study on the preparation and properties of polypropylene powder for selective laser sintering. Master's Thesis, University of Chinese Academy of Sciences (Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences), China, 2019(in Chinese).
龚小弟. 选择性激光烧结聚丙烯粉末的制备与性能研究. 硕士学位论文, 中国科学院大学 (中国科学院重庆绿色智能技术研究院), 2019.
5 Yan C Z, Shi Y S, Yang J S, et al. Polymer Materials Science & Engineering, 2010, 26(8), 145 (in Chinese).
闫春泽, 史玉升, 杨劲松, 等. 高分子材料科学与工程, 2010, 26(8), 145.
6 Tan L J Y, Zhu W, Zhou K. Advanced Functional Materials, 2020, 30(43), 2003062.
7 Schmid M, Amado A, Wegener K. AIP Conference Proceedings, 2015, 1664, 160009.
8 Yan C Z, Shi Y S, Yang J S, et al. Journal of Huazhong University of Science and Technology: Natural Science Edition, 2008, 36(3), 20 (in Chinese).
闫春泽, 史玉升, 杨劲松, 等. 华中科技大学学报: 自然科学版, 2008, 36(3), 20.
9 Feng D, Wang B, Qi F W, et al. Chemical Industry and Engineering Progress, 2020, 40(8), 4290 (in Chinese).
冯东, 王博, 戚方伟, 等. 化工进展, 2020, 40(8), 4290.
10 Berretta S, Evans K, Ghita O. Materials & Design, 2018, 139, 141.
11 Yuan S Q, Shen F, Chua C K, et al. Progress in Polymer Science, 2019, 91, 141.
12 Liu G, Zhang X F, Chen X L, et al. Materials Science and Engineering R: Reports, 2021, 145, 100596.
13 Salmoria G V, Leite J L, Ahrens C H, et al. Polymer Testing, 2007, 26(3), 361.
14 Salmoria G V, Leite J L, Vieira L F, et al. Polymer Testing, 2012, 31(3), 411.
15 Salmoria G V, Lauth V R, Cardenuto M R, et al. Optics & Laser Technology, 2018, 98, 92.
16 Dechet M A, Gómez Bonilla J S, Lanzl L, et al. Polymers, 2018, 10(12), 1373.
17 Greiner S, Wudy K, Lanzl L, et al. Polymer Testing, 2017, 64, 136.
18 Salmoria G V, Leite J L, Paggi R A. Polymer Testing, 2009, 28(7), 746.
19 Leite J L, Salmoria G V, Paggi R A, et al. International Journal of Materials and Product Technology, 2010, 39(1-2), 205.
20 Lao S C, Yong W, Nguyen K, et al. Journal of Composite Materials, 2010, 44(25), 2933.
21 Tran N T, Pham N T H. International Journal of Polymer Science, 2021, 2021, 1.
22 Drummer D, Wudy K, Kühnlein F, et al. Physics Procedia, 2012, 39, 509.
23 Leite J L, Salmoria G V, Paggi R A, et al. The International Journal of Advanced Manufacturing Technology, 2012, 59(5), 583.
24 Salmoria G V, Leite J L, Paggi R A, et al. Polymer Testing, 2008, 27(6), 654.
25 Zhang X D, Guo Y L, Yu Y Q, et al. China Plastics, 2020, 34(1), 11(in Chinese).
张晓东, 郭艳玲, 于跃强, 等. 中国塑料, 2020, 34(1), 11.
26 Parandoush P, Lin D. Composite Structures, 2017, 182, 36.
27 Goh G D, Yap Y L. Advanced Materials Technologies, 2019, 4(1), 1800271.
28 Nath S D, Nilufar S. Polymers, 2020, 12(11), 2719.
29 Czelusniak T, Amorim F L. The International Journal of Advanced Manufacturing Technology, 2020, 110(7), 2049.
30 Lanzl L, Wudy K, Drummer D. Polymer Testing, 2020, 83, 106313.
31 Badini C, Padovano E, Camillis R D, et al. Journal of Applied Polymer Science, 2020, 137(38), 49152.
32 Arai S, Tsunoda S, Yamaguchi A, et al. Additive Manufacturing, 2018, 21, 683.
33 Jing W, Hui C, Qiong W, et al. Materials & Design, 2017, 116, 253.
34 Yan C Z, Hao L, Xu L, et al. Composites Science and Technology, 2011, 71(16), 1834.
35 Jansson A, Pejryd L. Additive Manufacturing, 2016, 9, 7.
36 Chen H, Zhu W, Tang H B, et al. International Journal of Machine Tools and Manufacture, 2021, 163, 103703.
37 Berti G, D'Angelo L, Gatto A, et al. Rapid Prototyping Journal, 2007, 16(2), 124.
38 Ippolito F, Rentsch S, Hübner G, et al. Composites Part B: Engineering, 2019, 164, 158.
39 Özbay B, Serhatlι ł E. Materials Technology, 2022, 37(4), 213.
40 Jiang J, Yang S, Li L, et al. Polymers for Advanced Technologies, 2020, 31(6), 1291.
41 Yuan Y, Hu H B, Wu W, et al. Polymer Composites, 2021, 42(8), 4105.
42 Yuan Y, Wu W, Hu H B, et al. RSC Advances, 2021, 11(4), 1984.
43 Mousa A A, Pham D T, Shwe S P. International Journal of Rapid Manufacturing, 2014, 4(1), 28.
44 Mousa A A. Jordan Journal of Mechanical & Industrial Engineering, 2014, 8(5), 265.
45 Rouway M, Nachtane M, Tarfaoui M, et al. The International Journal of Advanced Manufacturing Technology, 2021, 115(1), 61.
46 Wang J H, Bai P K, Zhang Z L, et al. Advanced Materials Research, 2011, 160, 756.
47 Yu G Y, Ma J D, Li J, et al. Polymers, 2022, 14(11), 2167.
48 Bai J M, Song J, Wei J. Journal of Materials Processing Technology, 2019, 264, 382.
49 Kenzari S, Bonina D, Dubois J M, et al. Materials & Design, 2012, 35, 691.
50 Mazzoli A, Moriconi G, Pauri M G. Materials & Design, 2007, 28(3), 993.
51 Jayakumar A, Singamneni S, Ramos M, et al. Materials, 2017, 10(7), 796.
52 Balzereit S, Proes F, Altstádt V, et al. Additive Manufacturing, 2018, 23, 347.
53 Lanzl L, Wudy K, Greiner S, et al. Polymer Composites, 2019, 40(5), 1801.
54 Bekem A, Ozbay B, Bulduk M E. Journal of the Faculty of Engineering and Architecture of Gazi University, 2021, 36(1), 421.
55 Li Z C, Wang Z H, Gan X P, et al. Macromolecular Materials and Engineering, 2017, 302(11), 1700211.
56 Wu H, Fahy W P, Kim S, et al. Progress in Materials Science, 2020, 111, 100638.
57 Bai J M, Goodridge R D, Yuan S Q, et al. Molecules, 2015, 20(10), 19041.
58 Rollo G, Ronca A, Cerruti P, et al. Polymers, 2020, 12(8), 1841.
59 Chen B L, Davies R, Liu Y A, et al. Additive Manufacturing, 2020, 35, 101363.
60 Xi S T, Zhang P Y, Huang Y J, et al. Polymer, 2020, 186, 122044.
61 Hupfeld T, Sommereyns A, Riahi F, et al. Materials, 2020, 13(15), 3312.
62 Goodridge R D, Shofner M L, Hague R J M, et al. Polymer Testing, 2011, 30(1), 94.
63 Yuan S Q, Zheng Y, Chua C K, et al. Composites Part A: Applied Science and Manufacturing, 2018, 105, 203.
64 Yuan S Q, Bai J M, Chua C K, et al. Polymers, 2016, 8(10), 370.
65 Wang X H, Jiao Q Z, Gao M M, et al. Polymer Composites, 2019, 40(3), 1251.
66 Zheng H Z, Zhang J, Lu S Q, et al. Materials Letters, 2006, 60(9-10), 1219.
67 Lao S C, Koo J H, Moon T J, et al. In: 2008 International Solid Freeform Fabrication Symposium. Austin, 2008, pp.55.
68 Tan L J Y, Zhu W, Zhou K. Powder Technology, 2020, 369, 25.
69 Yu C C, Ke Y C, Deng Q C, et al. Applied Sciences, 2018, 8(6), 964.
70 Tiwari S K, Pande S, Bobade S M, et al. Procedia Manufacturing, 2018, 21, 630.
71 Chung H, Das S. Materials Science and Engineering: A, 2008, 487(1-2), 251.
72 Warnakula A, Singamneni S. Materials, 2017, 10(8), 864.
73 Shishkovsky I, Scherbakov V, Morozov Y. Microelectronic Engineering, 2015, 146, 85.
74 Shishkovsky I V, Scherbakov V I, Saraeva I N, et al. Laser Physics Letters, 2017, 14(3), 035601.
75 Hupfeld T, Laumer T, Stichel T, et al. Procedia Cirp, 2018, 74, 244.
76 Hupfeld T, Salamon S, Landers J, et al. Journal of Materials Chemistry C, 2020, 8(35), 12204.
77 Hupfeld T, Sommereyns A, Schuffenhauer T, et al. Additive Manufacturing, 2020, 36, 101419.
78 Hassan M, Dave K, Chandrawati R, et al. European Polymer Journal, 2019, 121, 109340.