拉伸成膜工艺诱导聚乳酸结晶行为的研究进展

doi:10.11896/cldb.23030182

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (12992KB)
Export: BibTeX | EndNote (RIS)

Abstract Polylactic acid (PLA) has garnered significant research interest as a sustainable packaging material due to its excellent biodegradability, biocompatibility, and tensile strength. However, its application is constrained by inherent brittleness and poor heat resistance. The stretching process, a film-forming technique characterized by the coupling of temperature and strain fields, offers a promising approach to overcoming these limitations. By adjusting process parameters such as stretching temperature, stretching ratio, and stretching rate during the process, the crystallization, molecular orientation, and other condensed structures of PLA can be modified, as well as the degree of strain-induced crystallization, thereby enhancing the overall performance of PLA films. This paper reviews the effect of parameters (including stretching temperature, stretching ratio, and stretching rate) on the strain-induced crystallization behavior during the stretching process. The goal is to provide theoretical insights that can guide the development of high-performance PLA films and broaden their application potential.

Key words： polylactic acid stretched film strain-induced crystallization condensed structure stretching ratio

Published: Online: 2024-10-12

CLC number:

TQ32

Fund:This work was financially supported by the National Natural Science Foundation of China (12372245) and Scientific Research Fund of Hunan Provincial Education Department (22B0595).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DING Shijuan
	CUI Lingna
	LIU Yuejun

Cite this article:

DING Shijuan,CUI Lingna,LIU Yuejun. Research Progress on the Crystallization Behavior of Polylactic Acid Film Induced by Stretching Process[J]. Materials Reports, 2024, 38(18): 23030182-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23030182 OR http://www.mater-rep.com/EN/Y2024/V38/I18/23030182

1 Cao C, Xu Z J, Li D A. Polyester Industry, 2022, 35(3), 5 (in Chinese).
曹超, 许战军, 李德安. 聚酯工业, 2022, 35(3), 5.
2 Paula K T, Gaál G, Almeida G, et al. Optics & Laser Technology, 2018, 101, 74.
3 Zhang T, Yu Q Y, Yang H T, et al. Journal of Applied Polymer Science, 2019, 136(19), 47510.
4 Zhang Y, Yang Z J, Yu Y, et al. ACS Applied Polymer Materials, 2019, 1(4), 737.
5 Li C H, Jiang T, Wang J F, et al. ACS Applied Materials & Interfaces, 2017, 9(31), 25818.
6 Xue B, Cheng Z L, Yang S D, et al. Composites Part B:Engineering, 2021, 207, 108556.
7 Razavi M, Wang S Q. Macromolecules, 2019, 52(14), 5429.
8 Ding R, Xu A, Liu Y F, et al. Plastics, 2022, 51(3), 58 (in Chinese).
丁蕊, 徐昂, 刘倚帆, 等. 塑料, 2022, 51(3), 58.
9 Hu J P, Yao L H, Xing D, et al. China Forest Products Industry, 2022, 59(6), 29 (in Chinese).
胡建鹏, 姚利宏, 邢东, 等. 林产工业, 2022, 59(6), 29.
10 Yang K J, Zhou W J, Fang H G. Plastics, 2022, 51(3), 7 (in Chinese).
杨康杰, 周文娟, 方华高. 塑料, 2022, 51(3), 7.
11 Jiang Y P, Zhang Y X, Li J L, et al. Polymer Materials Science & Engineering, 2021, 37(9), 133 (in Chinese).
江元平, 张云秀, 李嘉莉, 等. 高分子材料科学与工程, 2021, 37(9), 133.
12 Xu S K, Wu Z W, Mao H J. Shanghai Plastics, 2020(4), 24 (in Chinese).
徐绍魁, 吴正文, 茆汉军. 上海塑料, 2020(4), 24.
13 Jariyasakoolroj P, Tashiro K, Chinsirikul W, et al. Macromolecular Materials and Engineering, 2019, 304(9), 1900340.
14 Dong Y, Liu Y J, Cui L N, et al. Materials Reports, 2023, 37(9), 224 (in Chinese).
董煜, 刘跃军, 崔玲娜, 等. 材料导报, 2023, 37(9), 224.
15 Gao X R, Li Y, Huang H D, et al. Macromolecules, 2019, 52(14), 5278.
16 Xia M L, Shi K X, Zhou M Z, et al. Polymers for Advanced Technologies, 2019, 30(9), 2436.
17 Bagheri E, Mosaddegh P, Behzad T. Journal of Applied Polymer Science, 2020, 137(38), 1.
18 Kanai T, Okuyama Y, Takashige M. Advances in Polymer Technology, 2018, 37(8), 2894.
19 Zin M R M, Mahendrasingam A, Konkel C, et al. Polymer, 2021, 216, 123422.
20 Liang M, Wang Y, Song S X, et al. Materials Reports, 2015, 29(S2), 413 (in Chinese).
梁敏, 王羽, 宋树鑫, 等. 材料导报, 2015, 29(S2), 413.
21 Li M Z, Wang J, Lu S J, et al. Polymer Bulletin, 2018(1), 58 (in Chinese).
李明专, 王君, 鲁圣军, 等. 高分子通报, 2018(1), 58.
22 Zhang Y, Tong Y, Li Y, et al. China Plastics Industry, 2018, 46(1), 99 (in Chinese).
张也, 佟毅, 李义, 等. 塑料工业, 2018, 46(1), 99.
23 Mallegni N, Phuong T V, Coltelli M B, et al. Materials, 2018, 11(1), 1.
24 Stoclet G, Elkoun S, Miri V, et al. International Polymer Processing, 2007, 22(5), 385.
25 Ou X, Cakmak M. Polymer, 2010, 51(3), 783.
26 Zhou H W, Song Z Q, Cai S Q. Journal of Polymer Science, 2020, 58(24), 3488.
27 Yoksan R, Dang K M, Boontanimitr A, et al. International Journal of Biological Macromolecules, 2021, 190, 141.
28 Chen M J. Packaging Forefront, 2015(4), 12 (in Chinese).
陈孟杰. 包装前沿, 2015(4), 12.
29 Chen Y J, Han L J, Li Z L, et al. RSC Advances, 2017, 7(2), 712.
30 Xu R J, Tian Z Q, Xie J Y, et al. Polymer Crystallization, 2019, 2(3), e10072.
31 Liu J Y, Zhang S J, Zhang L Y, et al. Colloid and Polymer Science, 2017, 295(2), 297.
32 Zhou C B, Li H F, Zhang W Y, et al. CrystEngComm, 2016, 18(18), 3237.
33 Li J Q, Xu M H, He H Z, et al. ACS Applied Polymer Materials, 2022, 4(10), 6969.
34 Zhang Q, Zhang T C, Zhou Y, et al. Polymer Journal, 2021, 53(12), 1371.
35 Zhang Q L, Zhang R, Meng L, et al. Polymer, 2016, 101, 15.
36 Zhou L, Xu P P, Ni S H, et al. Chinese Journal of Polymer Science, 2022, 40(10), 1201.
37 Ouchiar S, Stoclet G, Cabaret C, et al. Polymer, 2016, 99, 358.
38 Boonthamjinda L, Petchwatana N, Covavisaruch S, et al. Key Engineering Materials, 2015, 659, 363.
39 Zhou J, Zheng Y, Shan G R, et al. Polymer, 2020, 188, 122121.
40 Al-Itry R, Lamnawar K, Maazouz A, et al. European Polymer Journal, 2015, 68, 288.
41 Xu P P, Yang S, Gao X R, et al. Composites Part B:Engineering, 2021, 222, 109048.
42 Billimoria K, Heeley E L, Parsons N, et al. European Polymer Journal, 2018, 101, 127.
43 Jariyasakoolroj P, Tashiro K, Wang H, et al. Polymer, 2015, 68, 234.
44 Xu S, Tahon J F, Waele D, et al. Express Polymer Letters, 2020, 14(11), 1037.
45 Wang Y M, Li M, Wang K J, et al. Soft Matter, 2014, 10(10), 1512.
46 Chen X L, Jeffrey K, Shaw L H. Journal of Polymer Science Part B:Polymer Physics, 2011, 49, 9.
47 Li Z Q, Ye L, Zhao X W, et al. Journal of Industrial and Engineering Chemistry, 2017, 52, 338.
48 Takahashi K, Sawai D, Yokoyama T, et al. Polymer, 2004, 45(14), 4969.
49 Ma D Z. Structures and performance of polymers, Science Press, China, 2012, pp.229 (in Chinese).
马德柱. 聚合物结构与性能, 科学出版社, 2012, pp.229.
50 Rezabeigi E, Wood-Adams P M, Drew R A L. Journal of Polymer Science Part B:Polymer Physics, 2017, 55(14), 1055.
51 Li Z Q, Ye L, Zhao X W, et al. Journal of Biomedical Materials Research Part A, 2016, 104(5), 1082.
52 Li J F, Ye W Y, Fan Z Y, et al. ACS Applied Materials & Interfaces, 2021, 13(4), 5469.
53 Singh A A, Wei J, Herrera N, et al. Composites Science and Technology, 2018, 162, 140.
54 Shen T F, Xu Y S, Ma P M, et al. RSC Advances, 2016, 6(75), 71046.
55 Singh A A, Geng S, Herrera N, et al. Composites Part A:Applied Science and Manufacturing, 2018, 104, 101.
56 Jiang W, Liang Y, Zhang Y, et al. Polymer, 2022, 261, 1.
57 Du B X, Hou Y P, Xiao M, et al. In:Conference on Electrical Insulation and Dielectric Phenomena. Denver, CO, USA, 2022, 135.
58 Chapleau N, Huneault M A, Li H. International Polymer Processing, 2007, 22(5), 402.
59 Katanyoota P, Jariyasakoolroj P, Sane A. Polymer Bulletin, 2023, 80(5), 5219.