| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Research Progress on Corrosion and Protection of Copper-Nickel Alloys for Marine Engineering |
HAN Qiuli1, AN Shizhong1,2,3,*, SONG Kexing1,4,*, LIU Haitao1,2,3, ZHOU Yanjun1,2,3,
CHENG Chu1,2,3, ZHANG Yanmin1,2,3
|
1 School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, Henan, China
2 Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology, Luoyang 471023, Henan, China
3 Henan Key Laboratory of Non-ferrous Materials Science& Processing Technology, Luoyang 471023, Henan, China
4 Henan Academy of Sciences, Zhengzhou 450046, China |
|
|
|
|
Abstract Cu-Ni alloys are widely used in marine engineering fields such as marine water condensation systems, and heat exchangers of coastal power plants due to they have good corrosion resistance to seawater, high heat transfer coefficient, excellent anti-microbial adhesion performance and cold and hot processing performance. In this paper, the corrosion behavior of copper-nickel alloys used in marine engineering is reviewed. Firstly, the microstructure characteristics of copper-nickel alloys in as-cast, deformed and heat treated are summarized, and then the effects of alloying elements, temperature, pH and sulfur ions on the corrosion resistance of copper-nickel alloys are summarized and analyzed. The methods of improving the corrosion resistance of copper-nickel alloys such as alloying, sacrificial anode, corrosion inhibitor, anticorrosive coating and film technology are reviewed. Finally, the development trend of copper-nickel alloys for marine engineering is prospected.
|
|
Published:
Online: 2024-10-12
|
|
|
| Fund:This work was financially supported by the National Natural Science Foundation of China (52071133). |
|
|
1 Lu J, Wu J Y. Nonferrous Metal Materials and Engineering, 2020, 41(3), 55 (in Chinese).
陆菁, 武家艳. 有色金属材料与工程, 2020, 41(3), 55.
2 Jiang Y X, Lou H F, Xie H F, et al. Strategic Study of CAE, 2020, 22(5), 84 (in Chinese).
姜业欣, 娄花芬, 解浩峰, 等. 中国工程科学, 2020, 22(5), 84.
3 Jing W J. Guangzhou Chemical Industry, 2020, 48(11), 63 (in Chinese).
荆文婧. 广州化工, 2020, 48(11), 63.
4 Song C M. Microstructure and corrosion resistance of yttrium microalloyed B10 cupronickel alloy. Master’s Thesis, Jiangxi University of Science and Technology, China, 2020 (in Chinese).
宋春梅. 钇微合金化B10铜镍合金组织与耐蚀性能研究. 硕士学位论文, 江西理工大学, 2020.
5 Tong Q K, Guo H, Guo M X, et al. Nonferrous Metals, 2011, 63(1), 5 (in Chinese).
童庆坤, 郭宏, 郭明星, 等. 有色金属, 2011, 63(1), 5.
6 Guo C, Kang T, Wu S, et al. MRS Communications, 2021, 11(6), 910.
7 Gan C L, Liu X F, Huang H Y, et al. Journal of University of Science and Technology Beijing, 2011, 33(12), 1492 (in Chinese).
甘春雷, 刘雪峰, 黄海友, 等. 北京科技大学学报, 2011, 33(12), 1492.
8 Zuo C K, Kuai Z M, Hu A Y, et al. Heat Treatment Technology and Equipment, 2021, 42(2), 5 (in Chinese).
左承坤, 蒯支明, 胡安亚, 等. 热处理技术与装备, 2021, 42(2), 5.
9 Taher A, Jarjoura G, Kipouros G J. Corrosion Engineering, Science and Technology, 2013, 48(1), 71.
10 Guo Z, Jie J, Liu J, et al. Journal of Alloys and Compounds, 2020, 848, 156275.
11 Gao X, Wu H B, Liu M, et al. Rare Metal Materials and Engineering, 2021, 50(11), 3819 (in Chinese).
高鑫, 武会宾, 刘明, 等. 稀有金属材料与工程, 2021, 50(11), 3819.
12 Gurao N P, Sethuraman S, Suwas S. Materials Science and Engineering:A, 2011, 528(25-26), 7739.
13 Zhao C. Preparation and fundamental research of the Cu-15Ni-8Sn alloy with high strength and ductility. Ph.D. Thesis, South China University of Technology, China, 2020 (in Chinese).
赵超. 高强韧Cu-15Ni-8Sn合金的制备及相关基础研究. 博士学位论文, 华南理工大学, 2020.
14 Tang S, Li Z, Gong S, et al. Journal of Central South University, 2020, 27(4), 1158.
15 Niu D X. Research on hot extrusion microstructure heterogeneity of large size Cu-15Ni-8Sn bar. Master’s Thesis, South China University of Technology, China, 2021 (in Chinese).
牛冬鑫. 大规格Cu-15Ni-8Sn棒材热挤压组织非均匀性研究. 硕士学位论文, 华南理工大学, 2021.
16 Yang B J, Chen C F, Yao J H, et al. Equipment Environmental Engineering, 2017, 14(2), 24 (in Chinese).
杨博均, 陈翔峰, 姚敬华, 等. 装备环境工程, 2017, 14(2), 24.
17 Badawy W A, Ismail K M, Fathi A M. Electrochimica Acta, 2005, 50(18), 3603.
18 Efird K. Corrosion, 1977, 33(10), 347.
19 Ma A L, Jiang S L, Zhang Y G, et al. Corrosion Science, 2015, 91, 245.
20 BurleighU T D, Waldeck D H. Corrosion, 1999, 55(8), 800.
21 Zhang R W. Effect of iron and manganese on corrosion resistance of B10 copper-nickel alloy and its mechanism. Master’s Thesis, Jiangxi University of Science and Technology, China, 2019 (in Chinese).
张荣伟. 铁、锰对B10白铜合金耐蚀性能的影响及机理研究. 硕士学位论文, 江西理工大学, 2019.
22 Kirk W W, Lee T S, Lewis R O. In:Copper Development Association. Proceedings of Seminar on Copper Alloys in Marine Environments. Edgbaston, University of Birmingham, 1985, pp.41.
23 Jeon W S, Shur C C, Kim J G, et al. Journal of Alloys and Compounds, 2008, 455(1/2), 359.
24 Zhang Y N, Zi J L, Zheng M S, et al. Rare Metal Materials and Engineering, 2007, 36(3), 49 (in Chinese).
张雅妮, 訾进蕾, 郑茂盛, 等. 稀有金属材料与工程, 2007, 36(3), 49.
25 Mary N, Alemany-Dumont C, Normand B, et al. Electrochimica Acta, 2013, 98(5), 11.
26 Zhang R W, Sun J W, Li S Y, et al. Nonferrous Metals Science and Engineering, 2018, 9(4), 60 (in Chinese).
张荣伟, 孙军伟, 李升燕, 等. 有色金属科学与工程, 2018, 9(4), 60.
27 Yang R, Wen J B, Zhou Y J, et al. Materials, 2018, 11(9), 1777.
28 Zhou X D, Gao X, Pu H Y, et al. Sciences and Wealth, 2020(12), 303 (in Chinese).
周向东, 高鑫, 浦海涌, 等. 科学与财富, 2020(12), 303.
29 Yin C J. Study on erosion corrosion of B10 alloy in simulated seawater. Master’s Thesis, Harbin Engineering University, China, 2012 (in Chinese).
尹承军. B10合金在模拟海水中的冲刷腐蚀研究. 硕士学位论文, 哈尔滨工程大学, 2012.
30 Ezuber H M. Anti-Corrosion Methods and Materials, 2009, 56(3), 168.
31 Habib K, Husain A. Desalination, 1994, 97(1-3), 29.
32 Melchers R E. Corrosion, 2001, 57(5), 440.
33 Wan Y, Wang X, Sun H, et al. International Journal of Electrochemical Science, 2012, 7(9), 7902.
34 Cai Y, Xu Y, Zhao Y, et al. Metals, 2021, 11(7), 1080.
35 Al-Thubaiti M A, Hodgkiess T, Ho S Y K. Desalination, 2005, 183(1-3), 195.
36 Luo Z Q, Xin B L, Zhang W W, et al. Journal of South China University of Technology (Natural Science Edition), 2011, 39(11), 125 (in Chinese).
罗宗强, 辛保亮, 张卫文, 等. 华南理工大学学报(自然科学版), 2011, 39(11), 125.
37 Chen X N, Zhang X Q, Cheng X M, et al. Corrosion and Protection, 2015, 36(1), 49.
38 Bai Z, Li X, Feng Y, et al. Journal of Materials Engineering and Performance, 2023, 32(15), 6677.
39 Wang F P, Kang W L, Jing H M, et al. Corrosion electrochemical principle, method and application, Chemical Industry Press, China, 2008, pp.78 (in Chinese).
王凤平, 康万利, 敬和民, 等.腐蚀电化学原理、方法及应用, 化学工业出版社, 2008, pp.78.
40 Jadhav U, Hocheng H. Environmental Technology, 2016, 37(20), 2669.
41 Nady H, El-Rabiei M M, Samy M. Egyptian Journal of Petroleum, 2017, 26(1), 79.
42 Zheng Q, Li J. Materials Protection, 2009, 42(4), 10 (in Chinese).
郑强, 李进. 材料保护, 2009, 42(4), 10.
43 Rahmouni K, Keddam M, Srhiri A, et al. Corrosion Science, 2005, 47(12), 3249.
44 Kong D, Dong C, Xu A. Journal of Materials Engineering and Performance, 2017, 26(4), 1741.
45 Gao X, Liu M. Materials, 2022, 15(23), 8513.
46 Chen J, Qin Z, Martino T, et al. Corrosion Science, 2017, 114, 72.
47 Yang R, Wen J B, Zhou Y J, et al. Journal of Materials Engineering and Performance, 2019, 28(5), 2866.
48 Zubeir H M. Anti-Corrosion Methods and Materials, 2012, 59(4), 195.
49 Zhu Y, Chen X, Liu P, et al. Anti-Corrosion Methods and Materials, 2021, 68(2), 113.
50 Shao G, Gao Y, Wu J, et al. Materials and Corrosion, 2022, 73(7), 1085.
51 Zhu Z, Li S, Zhang R. RSC Advances, 2021, 11(19), 11318.
52 Taher A M, Jarjoura G, Kipouros G J. Canadian Metallurgical Quarterly, 2011, 50(4), 425.
53 Rosalbino F, Carlini R, Soggia F, et al. Corrosion Science, 2012, 58, 139.
54 Li X, Yang J, Hu Y, et al. Corrosion Engineering, Science and Technology, 2021, 56(6), 594.
55 Burleigh T D, Waldeck D H. Corrosion, 1999, 55(8), 800.
56 Lin G Y, Zhou Y X, Zeng J H, et al. Journal of Rare Earths, 2011, 29(7), 638.
57 Xie W. Effect of lanthanum on corrosion resistance of copper and copper-nickel alloys. Master’s Thesis, Jiangxi University of Science and Technology, China, 2018 (in Chinese).
谢蔚. 稀土镧对铜及铜镍合金耐蚀性能的影响. 硕士学位论文, 江西理工大学, 2018.
58 Leng X. Effect of alloying elements (Fe, Mn, La) on the corrosion resistance of B10 copper-nickel alloy. Master’s Thesis, Jiangxi University of Science and Technology, China, 2020 (in Chinese).
冷翔. 合金元素(Fe、Mn、La)对B10白铜合金耐蚀性能的影响. 硕士学位论文, 江西理工大学, 2020.
59 Hao Q Q. Effect of rare earth Ce on the hot deformation behavior of BFe10-1. 5-1 cupronickel alloy. Master’s Thesis, Jiangxi University of Science and Technology, China, 2019 (in Chinese).
郝齐齐. 稀土Ce对白铜BFe10-1. 5-1合金热变形行为的影响研究. 硕士学位论文, 江西理工大学, 2019.
60 Chen S H. Effect of rare earth element Ce on the microstructure and properties of Cu-10Ni-7Si-5Mn alloy. Master’s Thesis, Inner Mongolia University of Technology, China, 2021 (in Chinese).
陈少华. 稀土元素Ce对Cu-10Ni-7Si-5Mn合金组织和性能的影响研究. 硕士学位论文, 内蒙古工业大学, 2021.
61 Zhang X, Cui T, Liu Q, et al. Journal of Alloys and Compounds, 2021, 858, 157685.
62 Dalvand P, Raygan S, López G A, et al. Materials Research Express, 2019, 6(11), 116512.
63 Leng X, Zhang Y, Zhou Q, et al. Materials Research Express, 2018, 5(5), 056513.
64 Zhang Y, Song C, Cao Y, et al. International Journal of Electrochemical Science, 2020, 15, 4161.
65 Zhu W M, Zong X H. Ship Standardization Engineer, 2017, 50(5), 59 (in Chinese).
朱伟明, 宗献红. 船舶标准化工程师, 2017, 50(5), 59.
66 Shi F L, Huang L. Marine Technology, 2019(4), 53 (in Chinese).
施方乐, 黄雷. 造船技术, 2019(4), 53.
67 Ma Q G, Xiao W, Chen S X, et al. Corrosion and Protection, 2016, 37(10), 793 (in Chinese).
马启国, 肖稳, 陈散兴, 等. 腐蚀与防护, 2016, 37(10), 793.
68 Fateh A, Aliofkhazraei M, Rezvanian A R. Arabian Journal of Chemistry, 2020, 13(1), 481.
69 Jiang B, Jiang S L, Liu X, et al. Journal of Materials Engineering and Performance, 2015, 24(12), 4797.
70 Huang H, Li B, Zheng X, et al. Journal of Adhesion Science and Technology, 2023, 37, 2401.
71 Li W, Ma T, Tan B, et al. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2022, 649, 129531.
72 Lgaz H, Saha S K, Lee H, et al. Metals, 2021, 11(11), 1861.
73 Fekri M H, Omidali F, Alemnezhad M M, et al. Materials Chemistry and Physics, 2022, 286, 126150.
74 Lai Y, Gao Y, Yao X, et al. Journal of Adhesion Science and Technology, 2022, 36(8), 875.
75 Shinato K W, Zewde A A, Jin Y. Corrosion Reviews, 2020, 38(2), 101.
76 Shen J, Yang D, Ma L, et al. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2022, 636, 128058.
77 Wang L, Zhou Y, Li C P, et al. Surface Technology, 2022, 51(2), 259 (in Chinese).
王琳, 周漪, 李传鹏, 等. 表面技术, 2022, 51(2), 259.
78 Gao J C, Feng L. Xinjiang Oil and Gas, 2007(2), 47 (in Chinese).
高建村, 冯丽. 新疆石油天然气, 2007(2), 47.
79 Bai X, Liu X Y, Jiang J M. Shanghai Coatings, 2013, 51(4), 19 (in Chinese).
白雪, 刘希燕, 蒋健明. 上海涂料, 2013, 51(4), 19.
80 Pan X Y, Zhang A Q, Xu M, et al. Paint and Coatings Industry, 2022, 52(5), 1 (in Chinese).
潘鑫宇, 张安琪, 徐梦, 等. 涂料工业, 2022, 52(5), 1.
81 Jena G, Anandkumar B, Vanithakumari S C, et al. Progress in Organic Coatings, 2020, 139, 105444.
82 Gao Y, Chen X, Lu Q, et al. Advanced Engineering Materials, 2022, 25(2), 2200833.
83 Raman R K S, Arya A K, Tomy K, et al. Journal of Materials Science and Technology, 2023, 142, 124.
84 Vinodhini S P, Xavier J R. Materials Chemistry and Physics, 2021, 268, 124721.
85 Ye Z J, Wang J J, Lin C G, et al. Materials China, 2014(7), 418 (in Chinese).
叶章基, 王晶晶, 蔺存国, 等. 中国材料进展, 2014(7), 418.
86 Zhang X, Guan J H, Yin H W, et al. Electroplating and Finishing, 2021, 40(2), 132 (in Chinese).
张欣, 关金鹤, 尹华伟, 等. 电镀与涂饰, 2021, 40(2), 132.
87 Li H, Sun Y, Wang Z, et al. Materials, 2022, 15(14), 4816.
88 Xiong J W, Zhu J Y, Hu X F. Paint and Coatings Industry, 2017, 47(9), 12 (in Chinese).
熊静文, 朱继元, 胡小芳. 涂料工业, 2017, 47(9), 12.
89 Mohamed M E, Mahgoub F M, Ragheb D M, et al. Surface Engineering, 2021, 37(10), 1255.
90 Cao X Y, Du J, Yang Z M, et al. Journal of Aeronautical Materials, 2019, 39(6), 20 (in Chinese).
曹翔宇, 杜娟, 杨梓铭, 等. 航空材料学报, 2019, 39(6), 20.
91 Lin Z, Ma Y, Chen M Y, et al. Shanxi Chemical Industry, 2019, 39(6), 1 (in Chinese).
林泽, 马琰, 陈梦莹, 等. 山西化工, 2019, 39(6), 1.
92 Qiang Y J, Fu S L, Zhang S T, et al. Corrosion Science, 2018, 140, 111.
93 Lv Y, Liu M. Surface Engineering, 2019, 35(6), 542.
94 Mousavi S M A, Pitchumani R. Corrosion Science, 2021, 186, 109420.
95 An K, Sui Y, Wang Y, et al. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2022, 653, 129874. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2024, Vol. 38 
