INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Microstructure and Properties of nc-Ti(C, N)/a-C Composite Coating |
CHEN Qiang1, ZHANG Ergen1,*, LIANG Dandan1,*, ZHOU Qiong1, HUANG Biao1, HAN Sheng2
|
1 Shanghai Engineering Research Center of Physical Vapor Deposition (PVD) Superhard Coating and Equipment, Shanghai Institute of Technology, Shanghai 201418, China 2 School of Chemistry and Environmental Engineering, Shanghai Institute of Technology, Shanghai 201418, China |
|
|
Abstract To combine the high hardness and wear resistance of TiN and TiC coating with the self-lubricating and corrosion resistance of carbon coating. In this study, ternary nc-Ti(C, N) and nc-Ti(C, N)/a-C composite coating was synthesized through the cathodic arc and glow discharge technology. The effects of C content and characteristics on the microstructure, mechanical performance, tribological properties, and electroche-mical behavior of TiCN coatings were studied by SEM, XRD, Raman, XPS, nano-indenter, tribometer, and electrochemical workstation. The results show that with the increase of C content, the polycrystalline phase structure of TiN, TiC, and TiCxN1-x changes to polycrystalline/amorphous structure. With the C content of 43.85at%, amorphous components were precipitated to form the composite structure of TiN, TiC, TiCxN1-x, sp2-C, and sp3-C. As C content increased, the nano hardness (H), elastic modulus (E),H/E, and H3/E2 of the coating were initially increased and then decreased, the coating has the highest hardness and the best toughness with a C content of 43.85at%. With the C content of 65.16at%, the TiCN coating showed a low friction coefficient of about less than 0.1 because of the high content of sp2-C and sp3-C. nc-Ti(C, N)/a-C composite structure significantly improved the electrochemical corrosion properties of the TiCN coating. When the C content is 43.85at%, the highest corrosion potential and the lowest corrosion current density of the TiCN coating are -0.108 VSCE and 8.55×10-10 A/cm2 respectively. The combination of hard phases with graphite-like and amorphous structures can further strengthen the mechanical and frictional properties of the coatings. The better corrosion resistance of nc-Ti(C, N)/a-C composite coatings is mainly attributed to the dense nanocrystalline/amorphous structure and inert amorphous composition of the coatings.
|
Published: 25 November 2023
Online: 2023-11-21
|
Fund:Shanghai University Experimental Technology Team Construction Plan (10110N230079-A07),Shanghai Excellent Technical Leader Project (22XD1434500),Initial Funding of Scientific Research for the Introduction of Talents (YJ2022-31),National Natural Science Foundation of China (51901138),Shanghai Natural Science Foundation (20ZR1455700). |
|
|
1 Guemmaz M, Mosser A, Ahuja R, et al. International Journal of Inorganic Materials, 2001, 3, 1319. 2 Yu S Y, Zeng Q F, Oganov A, et al. Physical Chemistry Chemical Physics, 2015, 17, 11763. 3 Zhang D D, Shi K Y, Tang H C. Surface Technology, 2020, 49(6), 297 (in Chinese). 张冬冬, 史昆玉, 汤皓晨. 表面技术, 2020, 49(6), 297. 4 Wang J, Liu Y, Ye J W. Rare Metal Materials and Engineering, 2018, 47(5), 1385. 5 Aguilera L D, Miranda C S, Moreno K J. Journal of Iron and Steel Research (International), 2017, 24(8), 8. 6 Kong Y, Ma Y H, Li Y J, et al. Rare Metal Materials and Engineering, 2017, 46(4), 1026 (in Chinese). 孔营, 马英鹤, 李永健, 等. 稀有金属材料与工程, 2017, 46(4), 1026. 7 Li F Z, Wang K L, Zhao J F, et al. China Surface Engineering, 2017, 30(2), 56 (in Chinese). 李方正, 王昆仑, 赵继凤, 等. 中国表面工程, 2017, 30(2), 56. 8 Petkov N, Kashkarov E, Obrosov A, et al. Journal of Materials Engineering and Performance, 2018, 28(1), 343. 9 Siow P C, Ghani J A, Rizal M, et al. Surface and Interface Analysis, 2019, 51(6), 611. 10 Sun H, Billard A, Luo H, et al. Vacuum, 2021, 187, 110139. 11 Guo F F, Bi Y H, Li C, et al. Ceramics International, 2020, 46(15), 23510. 12 Qin Y F, Zheng G F, Zhu L Y, et al. Surface and Coatings Technology, 2018, 342, 137. 13 Zeng Y Q, Qiu Y D, Mao X Y, et al. Thin Solid Films, 2015, 584, 283. 14 Kuptsov K A, Kiryukhantsev-korneev P V, Sheveyko A N, et al. Acta Materialia, 2015, 83, 408. 15 Chen R, Tu J P, Liu D G, et al. Surface and Coatings Technology, 2011, 205(21-22), 5228. 16 Petkov N, Bakalova T, Bahchedzhiev H, et al. Journal of Nano Research, 2018, 51, 78. 17 Shan L, Wang Y X, Li J L, et al. Surface and Coatings Technology, 2013, 226, 40. 18 Cheng Y H, Browne T, Heckerman B. Vacuum, 2010, 85(1), 89. 19 Gui B H, Zhou H, Zheng J, et al. Ceramics International, 2021, 47, 8175. 20 Hu C, Chen L, Lou Y M, et al. Journal of Alloys and Compounds, 2021, 855, 157441. 21 Ma X, He X B, Liang Y Y, et al. Rare Metal Materials and Engineering, 2020, 49(2), 589 (in Chinese), . 马新, 何新波, 梁艳媛, 等. 稀有金属材料与工程, 2020, 49(2), 589. 22 Lee J H, Oh I H, Jang J H, et al. Metals and Materials International, 2020, 27(3), 456. 23 Ma Q S, Li L L, Xu Y, et al. Applied Surface Science, 2017, 392, 826. 24 Ma G J, Lin G Q, Sun G, et al. Physics Procedia, 2011, 18, 9. 25 Ghadai R K, Das S, Kalita K, et al. Materials Chemistry and Physics, 2021, 260, 124082. 26 Zhong A D, Moorea J J, Mishraa B M, et al. Surface and Coatings Technology, 2003, 163-164, 50. 27 Jeyachandran Y L, Narayandass S K, Mangalaraj D, et al. Materials Science and Engineering: A, 2007, 445-446, 223. 28 Zhang X H, Li J, Xiao J C, et al. Surface and Coatings Technology, 2019, 362, 21. 29 Musil J. Surface and Coatings Technology, 2000, 125, 322. 30 Leyland A, Matthews A. Wear, 2000, 246, 1. 31 Lawn B R, Evans A G, Marshall D B. Journal of the American Ceramic Society, 1980, 63(9-10), 574. 32 Drnovšek A, Vo H T, Figueiredo M R, et al. Surface and Coatings Technology, 2021, 409, 126909. 33 Wang D, Lin S S, Shi Q, et al. Ceramics International, 2021, 47(3), 3657. 34 Chen Q, Zhang E G, Zhou Q, et al. China Surface Engineering, 2022, 35(2), 161 (in Chinese). 陈强, 张而耕, 周琼, 等. 中国表面工程, 2022, 35(2), 161. 35 Burstein G T, Liu C, Souto R M, et al. Corrosion Engineering, Science and Technology, 2013, 39(1), 25. 36 Zhang S D, Liu Z W, Wang Z M, et al. Corrosion Science, 2014, 83, 111. 37 Chen S N, Liao B, Chen L, et al. Acta Physica Sinica, 2020, 69(10), 1 (in Chinese). 陈淑年, 廖斌, 陈琳, 等. 物理学报, 2020, 69(10), 1. 38 Liang D D, Zhou Y H, Liu X D, et al. Surface and Coatings Technology, 2022, 433, 128129. 39 Bala N, Singh H, Karthikeyan J, et al. Surface Engineering, 2013, 30(6), 414. 40 Sheu H H, Lin M H, Jian S Y, et al. Surface and Coatings Technology, 2018, 350, 1036. 41 Tao Y S, Xiong TY, Sun C, et al. Applied Surface Science, 2009, 256(1), 261. 42 Zhang Z R, Qian Y H, Xu J J, et al. Ceramics International, 2020, 46(8), 11846. |
|
|
|