硼在钢中的作用及表征方式

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (10467KB)
Export: BibTeX | EndNote (RIS)

Abstract Boron has always been a very important trace alloying element in steel, but many researchers have not yet unified the explanation of its action mechanism. Based on this, this work systematically describes and perfects the action mechanism of boron in steel. In this paper, the development history and the existing form of boron in steel are investigated, and the mechanism of boron affecting different properties of steel is mainly summarized. Different characterization methods of boron under different conditions were summarized. The results show that the boron content and the effect of boron with other microalloyed elements play an important role in the properties of the materials. The mechanism of boron affecting different properties of steel is not the same under different conditions. Therefore, the key to the role of boron element lies in the determination of the optimal boron content. At the same time, the research results show that the combination of atom probe and secondary ion mass spectrometry is very accurate and reliable for the characterization of trace boron elements. The use and development of this characterization method is very important for the future research of boron.

Key words： boron hardenability impact toughness hot ductility

Published: 05 June 2022 Online: 2022-06-08

CLC number:

TG142.1

Fund:National Natural Science Foundation of China (51761027, 51675255).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HAN Cheng
	CAO Rui

Cite this article:

HAN Cheng,CAO Rui. Effects and Characterization Methods of Boron in Steel[J]. Materials Reports, 2022, 36(Z1): 21080164-4.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2022/V36/IZ1/21080164

1 刘伟建. 硼的固溶和析出行为对低碳钢性能影响的研究. 博士学位论文, 北京科技大学, 2015.
2 Mun D J, Cho K C, Lee J S, et al. Metallurgical and Materials Transactions A, 2011, 43(5), 1639.
3 Kim S, Lee C. Materials Characterization, 2016, 116, 65.
4 赵燕青, 孙力, 刘宏强.特殊钢, 2018, 39(2), 65.
5 Astini V, Baek E R. Metals and Materials International, 2012, 18(6), 923.
6 Hara T, Uemori R, Tamehiro H. ISIJ International, 2004, 44(8), 1431.
7 Suski C A. Metallography, Microstructure and Analysis, 2013, 2(2), 79.
8 Takahashi J, Kawakami K, Fujioka M, et al. Acta Materialia, 2017, 133, 41.
9 Zhao F, Jiang B, Xie J, et al. Materials Letters, 2019, 236,440.
10 贺信莱, 褚幼义, 张秀林.金属学报, 1977, 13(4), 235.
11 刘国权, 李文仰. 金属学报, 1991, 27(2),A079.
12 Rodríguez-Galeano K F, Rodríguez-Baracaldo R, Olaya-Florez J J. Theoretical and Applied Fracture Mechanics, 2016, 86, 351.
13 王克鲁, 鲁世强, 康永林. 金属热处理, 2009, 34(3),6.
14 朱崧, 杜学铭, 吴光辉. 焊接技术, 2018, 47(7), 82.
15 郑刚, 李树林. 铸造技术, 2015, 36(7), 1725.
16 Rong A, Tian Z L. Journal of Mechanical Engineering, 2014, 50(24),100.
17 张唤唤, 张祖江, 吴世庆. 宽厚板, 2017, 23(4),38.
18 蔡可森, 姚永宽, 刘伟建. 炼钢, 2015, 31(3), 45.
19 颜慧成, 曹慧泉, 罗登. 钢铁研究学报, 2010, 22(5),55.
20 浦绍康. 钢铁研究, 1992(2), 55.
21 刘洪波, 刘建华, 丁浩. 工程科学学报, 2017, 39(4),520.
22 Zhao J X, Wang W, Wang L Q, et al. Results in Physics, 2019, 15,102.
23 Zhang Z W, Guo S, Cheng J L, et al. Materials Science and Engineering A, 2011, 528(3), 855.
24 Opez-Chipres E L, Maldonado C, Bedolla-Jacuinde A, et al. Materials Science and Engineering A, 2007, 460-461, 464.
25 Deva A, Mishra N S. Materials Science and Engineering A, 2011, 528(24), 7375.
26 Mejía I, Bedolla-Jacuinde A, Cabrera J M. Metallurgical and Materials Transactions A, 2013, 44(11), 5165.
27 Liu W J, Shi C B, Wang C M. Metallography, Microstructure, and Analysis, 2015, 4(2), 102.
28 Abe F. Procedia Engineering, 2011, 10, 94.
29 Matsunaga T, Tabuchi M, Souissi M, et al. Materials Science and Engineering A, 2019, 760, 267.
30 Mishra B, Kumar D, Sarkar R, et al. Materials Science and Engineering A, 2019, 744, 112.
31 Nie Y H, Fu W T, Weng Y Q. Journal of Iron and Steel Research, 2007, 14, 53.
32 Tian C L. Journal of Tianjin University, 2016, 49(10),1101.
33 Klimenkov M, Möslang A. Journal of Nuclear Materials, 2015, 462,280.
34 Shigesato G, Hara T. Materials Science & Engineering A, 2012, 556,358.
35 Bertoni G. Ultramicroscopy, 2008, 108, 782.
36 Da R G, Portavoce A, Drillet J, et al. Acta Materialia, 2020, 182, 226.
37 Akram M, Khattak N U, Mehmood K, et al. Journal of Radioanalytical and Nuclear Chemistry, 1999, 240, 823.