铜及其合金表面涂层技术与增材制造技术研究进展

doi:10.11896/cldb.20070054

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7404KB)
Export: BibTeX | EndNote (RIS)

Abstract Copper and its alloys have excellent corrosion resistance, electrical and thermal conductivity and mechanical processing properties, and are widely used in electrical, light industry, machinery manufacturing and other fields. With the continuous optimization of production conditions and meeting different application requirements at the same time, people expect to obtain parts with better overall performance or a particular performance, but the traditional manufacturing and processing methods are complex and the material utilization rate in the production process is low, there are great limitations. In order to realize the surface alloying of parts and improve the surface performance defects of parts, surface coating technology has been developed and widely used; in order to realize the forming of complex structural parts, people have developed additive manu-facturing technology. Copper alloy additive manufacturing technology can efficiently and quickly manufacture various types of precision parts through a layer-by-layer accumulation method. It not only has a high utilization rate of alloy materials, but also can meet the forming needs of various complex parts. It is the current copper alloy application research hotspots. In recent years, domestic and foreign researchers have used copper alloy coatings to improve the surface properties of parts with deposition, thermal spraying, cold spraying, etc. The research on copper alloy additive manufacturing technology mainly focuses on laser additive manufacturing technology, from process optimization, the analysis of the organization and performance provides a great theoretical basis for future research, but there is less attention to other additive manufacturing technologies such as electron beam additive and arc additive, and the composition is uniform in the copper alloy additive manufacturing process. The heat treatment process, and the excellent electrical conductivity, thermal conductivity, and density of the additive need to be further studied.
This article summarizes the process principle and research status of copper alloy surface coating and additive manufacturing technology. By comparing various additive manufacturing methods, the influence of various additive manufacturing technology process parameters on the microstructure and mechanical properties of the formed part is analyzed. The advantages and disadvantages of the formed parts obtained by each technology are summarized, and the future focus of copper alloy additive manufacturing is prospected, which lays the foundation for the preparation of copper alloy formed parts with better performance and process applications.

Key words： additive manufacturing process optimization heat treatment microstructure mechanical properties

Published: 03 November 2021

CLC number:

TG146

Fund:National Key R & D Plan (2018YFB1105800), Basic Strengthening Plan (2019-JCJQ-ZD-126).

About author:: Rongcheng Wang, graduated from Shandong University of Technology in 2017 with a bachelor's degree, and is currently pursuing a master's degree at Shandong University of Technology. His main research area is additive manufacturing of the copper alloy.
Yang Zhao, born in 1983, doctor, assistant researcher. His research direction is additive manufacturing and surface strength of the copper alloy.
Qing Chang, born in 1987, master, assistant researcher. Her research direction is surface engineering and remanufacturing engineering.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Rongcheng
	WANG Wenyu
	YIN Fengshi
	REN Zhiqiang
	CHANG Qing
	ZHAO Yang
	QIN Zhiyong

Cite this article:

WANG Rongcheng,WANG Wenyu,YIN Fengshi, et al. Research Progress of Copper and Its Alloys Surface Coating Technology and Additive Manufacturing Technology[J]. Materials Reports, 2021, 35(19): 19142-19152.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20070054 OR http://www.mater-rep.com/EN/Y2021/V35/I19/19142

1 Li Y H,Wang Z, Zhao H, et al. Journal of Shenyang Ligong University, 2019, 38(6), 22(in Chinese).
李玉海, 王震, 赵晖, 等. 沈阳理工大学学报, 2019, 38(6), 22.
2 Timo Rautio, Atef Hamada, Jani Kumpula, et al. Surface and Coatings Technology, 2020, 403, 126426.
3 Gabriele Baiocco, Gianluca Rubino, Nadia Ucciardello. Surfaces and Interfaces, 2020, 20, 100625.
4 Anja Buchwalder, Rolf Zenker. Surface & Coatings Technology, 2019, 375, 920.
5 Adrián Uriondo, Manuel Esperon-Miguez, Suresh Perinpanayagam. Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, 2015, 229(11), 2132.
6 Deng H B, Chen Y H, Chen W, et al. Journal of Netshape Forming Engineering, 2018, 10(5), 95(in Chinese).
邓怀波, 陈玉华, 陈伟, 等. 精密成形工程, 2018, 10(5), 95.
7 Wang S, Song S L. Scientific and Technological Innovation, 2020(17),170(in Chinese).
王硕, 宋胜利. 科学技术创新, 2020(17),170.
8 Jawade S A, Joshi R S, Desai S B. Materials Today: Proceedings, 2020, doi: 10.1016/j.matpr.2020.02.096.
9 Bandyopadhyay A, Bose S, et al. Additive Manufacturing, Chemical Rubber Company Press, USA, 2016.
10 Andreas Gebhardt. Understanding additive manufacturing, Hanser-Garden Publication, Germany, 2011.
11 Huang Y J, Liu J H, Yang J H, et al. China Metallurgy, 2019, 29(11), 6(in Chinese).
黄永建, 刘军会, 杨进航, 等. 中国冶金, 2019, 29(11), 6.
12 Niu Y H. Technology Wind, 2020(13), 161(in Chinese).
牛燕辉. 科技风, 2020(13), 161.
13 Nathan C Ou, Su Xiaoming, Duane C Bock. Coordination Chemistry Reviews, 2020, 421, 213459.
14 Anjana Devi. ‘Old Chemistries' for new applications: perspectives for development of precursors for MOCVD and ALD applications, Coordination Chemistry Reviews, Germany, 2013.
15 Deng Y, Chen W L, Li B X, et al. Ceramics International, 2020, 46(11), 18373.
16 John Arkwright, Ian Underhill, Nathan Pereira, et al. Optics Express, 2005, 13(7), 2731.
17 Hu C Y, Li J H. Rare Metal, 2001, 25(5), 364(in Chinese).
胡昌义, 李靖华. 稀有金属, 2001, 25(5), 364.
18 Guo Z, Sang L J, Wang Z D, et al. Surface and Coatings Technology, 2016, 307, 1059.
19 Pierre Lassègue, Laure Noé, Marc Monthioux, et al. Surface and Coa-tings Technology, 2017, 331, 129.
20 Jiao X X, Sang K Z, Wang F, et al. Hot Working Technology, 2017, 46(6), 135(in Chinese).
焦星星, 桑可正, 王凡, 等. 热加工工艺, 2017, 46(6), 135.
21 Prud'homme N, Constantoudis V, Turgambaeva A E, et al. Thin Solid Films, 2020, 701, 137967.
22 Zhang X F, Zhou K S, Song J B, et al. Journal of Inorganic Materials, 2015, 30(3), 287(in Chinese).
张小锋, 周克崧, 宋进兵, 等. 无机材料学报, 2015, 30(3), 287.
23 Wang C X. Value Engineering. 2020, 39(12), 236(in Chinese).
王晨曦. 价值工程, 2020, 39(12), 236.
24 Pedro Salazar, Victor Rico, Rafael Rodríguez-Amaro, et al. Electrochimica Acta, 2015, 169, 195.
25 Salazar P, Rico V, González-Elipe A R. Sensors and Actuators B: Chemical, 2016, 226, 436.
26 Liu X Y, Daw M S, Kress J D, et al. Thin Solid Films, 2002, 422(1-2), 141.
27 Kumar K K, Mukherjee S. Thin Solid Films, 2008, 516(14), 4535.
28 Qian Y C, Tan J, Liu Q Q, et al. Surface and Coatings Technology, 2011, 205(15), 3909.
29 Long Q, Lu F H, Luo X, et al. Hydrometallurgy of China, 2018, 37(3), 179(in Chinese).
龙琼, 路坊海, 罗勋, 等. 湿法冶金, 2018, 37(3), 179.
30 Liu J G, Fang X T, Zhu C Y, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 607, 125498.
31 Walsh F C, Wang S C, Zhou N. Current Opinion in Electrochemistry, 2020, 20, 8.
32 Hadi Khani, David O Wipf. Acs Applied Materials & Interfaces, 2017, 9, 6967.
33 Xie F Z, Wang G F, Zheng Y L. Applied Science and Technology, 2001(1), 1(in Chinese).
谢辅洲, 王桂芳, 郑玉丽. 应用科技, 2001(1), 1.
34 Subramanian B, Mohan S, Jayakrishnan S. Surface and Coatings Technology, 2006, 201(3-4), 1145.
35 Zhao Z X, Zeng P, Xie G R, et al. Electroplating & Finishing, 2015, 34(11), 595(in Chinese).
赵仲勋, 曾鹏, 谢光荣, 等. 电镀与涂饰, 2015, 34(11), 595.
36 Zhang W Q, Li Y Y, Chen Q R, et al. Journal of Xuchang University, 2017, 36(2), 64(in Chinese).
张万强, 李圆圆, 陈全入, 等. 许昌学院学报, 2017, 36(2), 64.
37 Lan L, Tan J, Du J, et al. China Mechanical Engineering, 2015, 26(9), 1260(in Chinese).
兰龙, 谭俊, 杜军, 等. 中国机械工程, 2015, 26(9), 1260.
38 Cui R H, Yu Z M, He Y T, et al. Corrosion Science and Protection Technology, 2010, 22(3), 169(in Chinese).
崔荣洪, 于志明, 何宇廷, 等. 腐蚀科学与防护技术, 2010, 22(3), 169.
39 Cui R H, Yu Z M, He Y T, et al. Journal of Chinese Society for Corrosion and Protection, 2011, 31(2), 145(in Chinese).
崔荣洪, 于志明, 何宇廷, 等. 中国腐蚀与防护学报, 2011, 31(2), 145.
40 Li L, Wang F F, Yin F S, et al. Modern Manufacturing Engineering, 2012(10), 11(in Chinese).
李丽, 王飞飞, 殷凤仕, 等. 现代制造工程, 2012(10), 11.
41 Wang F L, Zeng P, Wang Y, et al. Microelectronic Engineering, 2017, 180, 30.
42 Li B S, Mei T Y, Li D D, et al. Ultrasonics Sonochemistry, 2019, 58, 104680.
43 Liu N N, Wu M H, Li Z, et al. Rare Metal Materials and Engineering, 2013, 42(3), 649(in Chinese).
刘娜娜, 吴蒙华, 李智, 等. 稀有金属材料与工程, 2013, 42(3), 649.
44 Huang Q S, Zhong Y B, Ren Z M, et al. Rare Metal Materials and Engineering, 2006(S2), 381(in Chinese).
黄琦晟, 钟云波, 任忠鸣, 等. 稀有金属材料与工程, 2006(S2), 381.
45 Hisayoshi Matsushima, Andreas Bund, Waldfried Plieth, et al. Electrochimica Acta, 2007, 53(1), 161.
46 Denise Yin, Heather A. Murdoch, B.et al. Electrochemistry Communications, 2019(98), 96.
47 Zhao Y P. Fundamental research on rapid prototyping nanocrystalline copper oriented by jet electroforming. Master's Thesis, Nanjing University of Aeronautics ＆ Astronautics, China, 2005(in Chinese).
赵阳培. 射流电铸快速成型纳米晶铜工艺基础研究. 硕士学位论文, 南京航空航天大学, 2005.
48 Zhao Y P, Ge S R, Zhang J W, et al. Materials for Mechanical Enginee-ring, 2008(1), 37(in Chinese).
赵阳培, 葛世荣, 张君伟, 等. 机械工程材料, 2008(1), 37.
49 Cai H T, Jiang T, Zhou Y. Equipment Manufacturing Technology, 2014(6), 28(in Chinese).
蔡宏图, 江涛, 周勇. 装备制造技术, 2014(6), 28.
50 Miao Y B, Zhu H Y, Gao P F, et al. Journal of Materials Research and Technology, 2020, Doi: 10.1016/j.jmrt.2020.10.006.
51 Zhou C J, Zhu S, Wang X M, et al. Materials Review, 2018, 32(19), 3444(in Chinese).
周超极, 朱胜, 王晓明, 等. 材料导报, 2018, 32(19), 3444.
52 Wu T, Zhu L, Li J, et al. Heat Treament of Metals Abroad, 2005(4), 2(in Chinese).
吴涛, 朱流, 郦剑, 等. 国外金属热处理, 2005(4), 2.
53 Li C L, Li W G, Zhao Y T, et al. Materials for Mechanical Engineering, 2020, 44(5), 60(in Chinese).
李成龙, 李文戈, 赵远涛, 等. 机械工程材料, 2020, 44(5), 60.
54 Valencia V T, Pawłowski L, Lecomte-Nana G, et al. Surface and Coa-tings Technology, 2020, 397, 126059.
55 Sun L Li, Liu X K, Liu P, et al. Hot Working Technology, 2015, 44(16), 194(in Chinese).
孙联雷, 刘新宽, 刘平, 等. 热加工工艺, 2015, 44(16), 194.
56 Yang L P. Light Metals, 2016(8), 51(in Chinese).
杨林鹏. 轻金属, 2016(8), 51.
57 Guo L J, Peng J, Wang H Q, et al. Journal of Alloys and Compounds, 2017, 703, 560.
58 Atul Ranjan, Aminul Islam, Manabendra Pathak, et al. Vacuum, 2019, 168, 108834.
59 Song W H, Zhang H W. Cleaning World,2020,36(4),50(in Chinese).
宋文辉, 张慧武. 清洗世界, 2020, 36(4), 50.
60 Qiu M K, Zhang S L, Zhang Y R, et al. Hot Working Technology, 2018, 47(20), 13(in Chinese).
邱明坤, 张树玲, 张燕然, 等. 热加工工艺, 2018, 47(20), 13.
61 Gu X B, Yang D M. Journal of East China Shipbuilding Institute, 1997(3), 29(in Chinese).
顾晓波, 杨大明. 华东船舶工业学院学报, 1997(3), 29.
62 Jiang L, Wang H G, Hou G L, et al. Ordnance Material Science and Engineering, 2005(2), 48(in Chinese).
江礼, 王汉功, 侯根良, 等. 兵器材料科学与程, 2005(2), 48.
63 Jiang L, Yuan X J, Wang H G, et al. Materials Protection, 2007(12), 10(in Chinese).
江礼, 袁晓静, 王汉功, 等. 材料保护, 2007(12), 10.
64 Zhu S, Zhou C J, Wang X M, et al. Journal of Mechanical Engineering, 2016, 52(8), 119(in Chinese).
朱胜, 周超极, 王晓明, 等. 机械工程学报, 2016, 52(8), 119.
65 Zhou C J, Wang X M, Zhu S, et al. China Surface Engineering, 2017, 30(3), 66(in Chinese).
周超极, 王晓明, 朱胜, 等.中国表面工程, 2017, 30(3), 66.
66 Li S L. Hebei Agricultural Machinery, 2017(7), 33(in Chinese).
李帅伦. 河北农机, 2017(7), 33.
67 Daram P, Munroe P R, Banjongprasert C. Surface and Coatings Techno-logy, 2020, 391, 125565.
68 Tian H L, Wang C L, Guo M Q, et al. Surface and Coatings Technology, 2019, 370, 320.
69 Huang Z, Zhang H, Zhang Y L. Valve, 2005(1), 14(in Chinese).
黄召, 张虎, 张彦雷. 阀门, 2005(1), 14.
70 Liu J K, Su X Y. Surface Technology, 2016, 45(9), 134(in Chinese).
刘基凯, 苏新勇. 表面技术, 2016, 45(9), 134.
71 Fang L J, Huang J, Liu Y, et al. Surface and Coatings Technology, 2019, 357, 794.
72 Su G X, Zhou L, Wang L J, et al. Hot Working Technology, 2018, 47(22), 7(in Chinese).
苏革新, 周亮, 王利捷, 等. 热加工工艺, 2018, 47(22), 7.
73 Hwasung Yeom, Kumar Sridharan. Annals of Nuclear Energy, 2021,150, 107835.
74 Hamid Assadi, Frank Gärtner, Acta Materialia, 2003, 51(15), 4379.
75 Zheng J X, Jin Y H, Liu C S. Surface Technology, 2013, 42(1), 5(in Chinese).
郑建新, 金耀辉, 刘传绍. 表面技术, 2013, 42(1), 5.
76 Yin Shuo, Richard Jenkins, Yan Xingchen, et al. Materials Science and Engineering: A, 2018, 734, 67.
77 Yang K, Li W Y, Guo X P, et al. Journal of Materials Science & Technology, 2018, 34(9), 1570.
78 Hu K W, Li W Y, Yang X W, et al. Journal of Netshape Forming Engineering, 2019, 11(6), 154(in Chinese).
胡凯玮, 李文亚, 杨夏炜, 等. 精密成形工程, 2019, 11(6), 154.
79 Zhang W P, Ma H B. Materials for Mechanical Engineering, 2009, 33(9), 6(in Chinese).
张维平, 马海波. 机械工程材料, 2009, 33(9), 6.
80 Hu M J, Ji L K, Ma Q R, et al. Petroleum Tubular Goods ＆ Instruments, 2019, 5(5), 1(in Chinese).
胡美娟, 吉玲康, 马秋荣, 等. 石油管材与仪器, 2019, 5(5), 1.
81 Yan X C, Yin S, Chen C Y, et al. Materials Research Letters, 2019,7(8), 327.
82 Griffith M L, Schlienge M E, Hawell L D, et al. Materials & Design, 1999, 20(2-3), 107.
83 Zhang W, Yao J H, Hu X D, et al. Manufacturing Automation, 2008(2), 4(in Chinese).
张伟, 姚建华, 胡晓冬, 等. 制造业自动化, 2008(2), 4.
84 Dong S Y, Xu B S, Liang X B, et al. China Surface Engineerign, 2001(4), 15(in Chinese).
董世运, 徐滨士, 梁秀兵, 等. 中国表面工程, 2001(4), 15.
85 Dong S Y, Zhang X H, He X D, et al. Journal of Harbin Ins Titute of Technology, 2003, 35(2), 33(in Chinese).
董世运, 张幸红, 赫晓东, 等. 哈尔滨工业大学学报, 2003, 35(2), 33.
86 Dong S Y, Han J C, Wang M C, et al. Heat Treatment Of Metals, 2000(3), 1(in Chinese).
董世运, 韩杰才, 王茂才, 等. 金属热处理, 2000(3), 1.
87 Yu M F, Deng Q L, Ge Z J, et al. Electromachining & Mould, 2007(4), 31(in Chinese).
余民芳, 邓琦林, 葛志军, 等. 电加工与模具, 2007(4), 31.
88 Ge Z J, Deng Q L, Song J L, et al. Electromachining & Mould, 2007(1), 39(in Chinese).
葛志军, 邓琦林, 宋建丽, 等. 电加工与模具, 2007(1), 39.
89 Zhang Y Z, Jin J T, Tu Y, et al. Heat Treatment of Metals, 2009, 34(4), 28(in Chinese).
张永忠, 金具涛, 涂义, 等. 金属热处理, 2009, 34(4), 28.
90 Scott M Thompson, Linkan Bian, Nima Shamsaei, et al. Additive Manufacturing, 2015, 8, 32.
91 Huang J, Yan X C, Chang C, et al. Surface and Coatings Technology, 2020, 395, 125936.
92 Chang C, Yan X C, Rodolphe B, et al. Journal of Materials Science, 2020, 55, 8303.
93 Zhao Z G, Bo L, Li L, et al. Aeronautical Manufacturing Technology, 2014(19), 46(in Chinese).
赵志国, 柏林, 李黎, 等. 航空制造技术, 2014(19), 46.
94 Chen D H, Haneen D, Florian S, et al. Journal of Materials Research and Technology, 2020, 9(4), 8314.
95 Popovich A, Sufiiarov V, Polozov I, et al. Materials Letters, 2016, 179, 38.
96 Tan C L, Zhou K S, Ma W Y, et al. Materials & Design, 2018, 155, 77.
97 Yi L L, Mao Z F, Zhang Z W. Journal of Sichuan University (Natural Science Edition), 2019, 56(4), 689(in Chinese).
易力力, 毛忠发, 张正文. 四川大学学报(自然科学版), 2019, 56(4), 689.
98 Sohei Uchida, Takahiro Kimura, Takayuki Nakamoto, et al. Materials & Design, 2019, 175, 107815.
99 Wang P, Deng L, Prashanth K G, et al. Journal of Alloys and Compounds, 2018, 735, 2263.
100 Tan Z, Zhang X Y, Zhou Z L, et al. Journal of Alloys and Compounds, 2019, 787, 903.
101 Wang J B, Zhou X L, Li J H,et al. Additive Manufacturing, 2020, 31, 100921.
102 Jiang M, Qi H B, Lin F. Machinery Design & Manufacture, 2008(1), 189(in Chinese).
姜明, 齐海波, 林峰. 机械设计与制造, 2008(1), 189.
103 Xing X X, Pan L H, Wang Y, et al. Welding & Joining, 2016(7), 22(in Chinese).
邢希学, 潘丽华, 王勇, 等. 焊接, 2016(7), 22.
104 Soroush Momeni, Ralf Guschlbauer, Fuad Osmanlic, et al. Materials Letters, 2018, 223, 250.
105 Ralf Guschlbauer, Soroush Momeni, Fuad Osmanlic, et al. Materials Characterization, 2018, 143, 163.
106 Torsten Wolf, Fu Zongwen, Carolin Körner. Materials Letters, 2019, 238, 241.
107 Huang K, Zhang C S, Zhao Y, et al. Die & Mould Manufacture, 2019, 19(3), 86(in Chinese).
黄柯, 张昌松, 赵阳, 等. 模具制造, 2019, 19(3), 86.
108 Hauser T, Da Silva A, Reisch R T, et al. Journal of Manufacturing Processes, 2020, 56, 1088.
109 Dhinakaran V, Ajith J, Fahmidha A F Y, et al. Materials Today: Proceedings, 2020, 21, 920.
110 Sudhanshu Ranjan Singh, Pradeep Khanna. Materials Today: Procee-dings, 2020. Doi: 10.1016/j.ccr.2020.213459.
111 Guo C, Ma M L, Hu R Z, et al. Materials Reports, 2019, 33(S2), 455(in Chinese).
郭纯, 马明亮, 胡瑞章, 等. 材料导报, 2019, 33(S2),455.
112 Chen J, Liu X P, Liang H. Heat Treatment of Metals, 2010, 35(9), 98(in Chinese).
陈健, 刘雪飘, 梁欢. 金属热处理, 2010, 35(9), 98.
113 Wu B T, Pan Z X, Ding D H,et al. Journal of Manufacturing Processes, 2018, 35, 127.
114 An F P, Li J Q, Jiang P, et al. Development and Application of Mate-rials, 2019, 34(4), 78(in Chinese).
安飞鹏, 李嘉琪, 蒋鹏, 等. 材料开发与应用, 2019, 34(4), 78.
115 Liu L, Zhuang Z, Liu F, et al. International Journal of Advanced Manufacturing Technology, 2013, 69(9), 2131.
116 Dong B, Pan Z, Shen C, et al. Metallurgical & Materials Transactions B, 2017, 48(6), 1.
117 Wen T T, Chen Y H, Chen W, et al. Journal of Netshape Forming Engineering, 2019, 11(5), 149(in Chinese).
温涛涛, 陈玉华, 陈伟, 等. 精密成形工程,2019, 11(5), 149.
118 Chen W, Huang L B, Chen Y H, et al. Journal of Netshape Forming Engineering, 2018, 10(5), 81(in Chinese).
陈伟, 黄龙彪, 陈玉华, 等. 精密成形工程, 2018, 10(5), 81.