|
|
|
|
|
|
Flexible Materials for Lithium-sulfur Batteries: a Review |
LIU Jianwei1,WANG Jianan1,2,ZHU Lei1,YAN Wei1,
|
1 Department of Environmental Science and Engineering,Xi’an Jiaotong University,Xi'an 710049,China 2 Department of Applied Chemistry,School of Science,Xi’an Jiaotong University,Xi'an 710049,China |
|
|
Abstract In recent years, demand for flexible electronic devices has been constantly growing with the rapid emergence of wearable and portable devices. Flexible batteries as the key components have attracted great research interests. It is most critical to develop batteries with higher energy-density for the future development of flexible electronic devices. Lithium-sulfur (Li-S) batteries are considered to be important frontier of energy storage in the future due to their high theoretical capacity, high energy density and low cost. Thus, the development of high-performance flexible lithium-sulfur batteries can meet better the increasing needs of future flexible wearable electronic devices. However, traditional lithium-sulfur batteries are difficult to achieve high flexibility: the rigid electrode material cannot be bended easily; the liquid electrolytes raise the risk of electrolyte leakage under bending state; poor interfacial contact owing to the assembly method based on physical joining. Once subjected to bending or stretching, traditional lithium-sulfur batteries will lose its function or undergo fast performance decline. Therefore, considerable efforts have been made in these years focusing on developing electrode materials and solid-state electrolytes which are adaptable for flexible batteries, as well as on creating special battery structures. Currently, flexible electrode materials are mainly based on carbon or its modified materials, such as carbon nanotubes, graphene, carbon cloth and carbon paper, as well as polymer materials. These materials not only can meet the flexible requirements, but also are beneficial for the overall battery performance through strengthening Li+/electrons transportation and reducing interface impedance due to the porous structure and the large specific surface. Solid-state electrolytes which contains gel polymer electrolytes, polymer electrolytes and inorganic electrolytes, has good chemical stability, high safety, high flexibility and plasticity. At the same time, the novel battery structure design, such as linear structure, paper folding structure and braided structure have been realized according to the topology principle, through which can the stress change of the battery internal structure during deformation process be reduced. This review gives a summary of relevant achievements in the flexibilization of lithium-sulfur batteries from the perspectives of electrode mate-rials, solid-state electrolytes, and battery structure design. It also includes a prospective discussion upon the challenges and future development trends.
|
Published: 15 January 2020
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (51978569), Natural Science Foundation of China (51803164),China Postdoctoral Science Foundation (2018M643635), Natural Science Foundation of Shaanxi Province (2019JQ-126). |
About author:: Jianwei Liu is currently a Ph.D. student at Department of Environment Science & Engineering, Xi’an Jiaotong University, China. His current research interests focus on design and application of nanomaterials via electrospinning for energy storage, such as lithium-sulfur and sodium batteries. Wei Yan obtained his Ph.D. degree from Nankai University in 1997. He was appointed as the chair professor of Research Center for Water Pollution Control & Resource Reuse at Xi’an Jiaotong University in 2015. His research activity focuses on nanomaterials electrochemistry, batteries and wastewater treatment. He has published over 120 papers in international journals and been awarded 13 patents. |
|
|
1 Heo J S, Eom J, Kim Y H, et al. Small, 2018, 14 (3), 34. 2 Wang X, Lu X, Liu B,et al.Advanced Materials, 2014, 26 (28), 4763. 3 He Y, Matthews B, Wang J, et al.Journal of Materials Chemistry A, 2018, 6 (3), 735. 4 Liu W, Song M S, Kong B, et al.Advanced Materials, 2017, 29 (1), 3436. 5 Chen Y, Fu K, Zhu S, et al.Nano Letters, 2016, 16 (6), 3616. 6 Aliahmad N, Liu Y, Xie J, et al.ACS Applied Materials & Interfaces, 2018, 10 (19), 16490. 7 Amin K, Meng Q, Ahmad A, et al.Advanced Materials, 2018, 30 (4), 1703868. 8 Qian G, Zhu B, Liao X, et al.Advanced Materials, 2018, 30 (12), 1704947. 9 Zhang Z W, Peng H J, Zhao M, et al.Advanced Functional Materials, 2018, 28 (38), 1707536. 10 Zhang X, Xie H, Kim C S, et al.Materials Science and Engineering R: Reports, 2017, 121(1), 29. 11 Liang J, Sun Z H, Li F, et al. Energy Storage Materials,2016, 2, 76. 12 Schuster J, He G, Mandlmeier B, et al.Angewandte Chemie, 2012, 51 (15), 3591. 13 Zhu J, Zhu P, Yan C, et al.Progress in Polymer Science,2019, 90, 118. 14 Peng H J, Huang J Q, Cheng X B, et al.Advanced Energy Materials,2017, 7 (24), 1700260. 15 Seh Z W, Li W, Cha J J, et al.Nature Communications, 2013, 4, 1331. 16 Guo Y P, Li H Q, Zhai T Y, et al. Advanced Materials,2017, 29 (29),1700007. 17 Yoo E, Kim J, Hosono E, et al. Nano Letters, 2008, 8 (8),2277. 18 Peng H J, Xu W T, Zhu L, et al.Advanced Functional Materials, 2016, 26 (35), 6351. 19 Chen C, Cao J, Lu Q, et al.Advanced Functional Materials, 2017, 27 (3), 1604639. 20 Chen C, Cao J, Wang X, et al.Nano Energy, 2017, 42, 187. 21 Pan Z, Ren J, Guan G, et al.Advanced Energy Materials, 2016, 6 (11), 1600271. 22 Su Y S, Fu Y, Manthiram A.Physical Chemistry Chemical Physics, 2012, 14 (42), 14495. 23 Sun L, Li M, Jiang Y, et al. Nano Letters, 2014, 14 (7), 4044. 24 Yuan Z, Peng H J, Huang J Q, et al.Advanced Functional Materials, 2014, 24 (39), 6105. 25 Zhang Y Z, Zhang Z, Liu S, et al.ACS Applied Materials & Interfaces, 2018, 10 (10), 8749. 26 Razzaq A A, Yao Y, Shah R, et al.Energy Storage Materials, 2019, 16, 194. 27 Wang X, Wan F, Zhang L, et al.Advanced Functional Materials, 2018, 28 (18), 1707247. 28 Wang Q, Wang X, Wan F, et al.Small, 2018, 14 (23), 1800280. 29 Bonaccorso F, Colombo L, Yu G, et al.Science, 2015, 347 (6217), 1246501. 30 Zhang L, Wang Y, Niu Z, et al.Carbon, 2019, 141, 400. 31 Niu Z, Liu L, Zhang L, et al.Advanced Energy Materials, 2015, 5 (23), 1500677. 32 Lv W, Li Z, Deng Y, et al.Energy Storage Materials, 2016, 2, 107. 33 Hooch A W, Choi Y, Seong K D, et al.Advanced Materials Interfaces, 2018, 5 (5), 1701212. 34 Wen L, Li F, Cheng H M.Advanced Materials, 2016, 28 (22), 4306. 35 Jin J, Wen Z, Ma G, et al.RSC Advances, 2013, 3 (8), 2558. 36 Cao J, Chen C, Zhao Q, et al.Advanced Materials, 2016, 28 (43), 9629. 37 Chen K, Cao J, Lu Q, et al.Nano Research, 2018, 11 (3), 1345. 38 Hu G, Sun Z, Shi C, et al.Advanced Materials,2017, 29 (11). 39 Wang C, Su K, Wan W, et al. Journal of Materials Chemistry A, 2014, 2 (14), 5018. 40 Song J, Yu Z, Gordin M L, et al. Nano Letters, 2016, 16 (2), 864. 41 Xiao P, Bu F, Yang G, et al. Advanced Materials, 2017, 29 (40), 3324. 42 Zhou G, Li L, Ma C, et al. Nano Energy, 2015, 11, 356. 43 Shi H, Zhao X, Wu Z S, et al. Nano Energy, 2019, 60, 743. 44 Elazari R, Salitra G, Garsuch A, et al. Advanced Materials, 2011, 23 (47), 5641. 45 Chung S H, Chang C H, Manthiram A Robust. Small, 2016, 12 (7), 939. 46 He N, Zhong L, Xiao M, et al. Scientific Reports, 2016, 6, 33871. 47 Liang X, Liu Y, Wen Z, et al. Journal of Power Sources,2011, 196 (16), 6951. 48 Wang J, Chen J, Konstantinov K,et al.Electrochimica Acta, 2005,51,4634. 49 Li F, Kaiser M R, Ma J, et al.Energy Storage Materials, 2018, 13, 312. 50 Zhang Y, Zhao Y, Bakenov Z, et al.Electrochimica Acta, 2014, 143, 49. 51 Zhou X, Chen F, Yang J.Journal of Energy Chemistry, 2015, 24 (4), 448. 52 Xin P, Jin B, Li H, et al.ChemElectroChem, 2017, 4 (1), 115. 53 Zhao Y, Zhu W, Chen G Z, et al.Journal of Power Sources, 2016, 327, 447. 54 Luo Y, Guo R, Li T, et al.ChemSusChem, 2019, 12 (8), 1591. 55 Zhou W, Yu Y, Chen H, et al.Journal of the American Chemical Society, 2013, 135 (44), 16736. 56 Sen S, Dutta D, Bhattacharyya A J.Journal of Materials Chemistry A, 2015, 3 (42), 20958. 57 Zhang K, Xu Y, Lu Y Y. et al.Journal of Materials Chemistry A, 2016, 4 (17), 6404. 58 Li W, Zhang Q, Zheng G, et al.Nano Letters, 2013, 13 (11), 5534. 59 Wu F, Wu S, Chen R, et al.Electrochemical and Solid-State Letters, 2010, 13 (4), A29. 60 Wang X, Zhang Z, Yan X, et al.Electrochimica Acta, 2015, 155, 54. 61 Zhang M, Meng Q, Ahmad A, et al.Journal of Materials Chemistry A, 2017, 5 (33), 17647. 62 Li H, Gong Y, Fu C, et al.Journal of Materials Chemistry A, 2017, 5 (8), 3875. 63 Luo J, Lee R C, Jin J T, et al.Chemical Communications, 2017, 53 (5), 963. 64 Wang H, Zhang W, Liu H, et al.Angewandte Chemie, 2016, 55 (12), 3992. 65 Zheng X, Zheng Y, Zhang H, et al.Chemical Engineering Journal, 2019, 370, 547. 66 Seh Z W, Yu J H, Li W, et al.Nature Communications, 2014, 5, 5017. 67 Peng H J, Zhang Z W, Huang J Q, G. et al.Advanced Materials, 2016, 28 (43), 9551. 68 Jeong T G, Choi D S, Song H, et al.ACS Energy Letters, 2017, 2 (2), 327. 69 He Y, Chang Z, Wu S, et al.Advanced Energy Materials, 2018, 8 (34), 1802130. 70 Wu Q, Zhou X, Xu J, et al.Journal of Energy Chemistry, 2019, 38, 94. 71 Mao Y, Li G, Guo Y, et al.Nature Communications, 2017, 8, 14628. 72 Chen K, Sun Z, Fang R, et al.Advanced Functional Materials, 2018, 28 (38), 1707592. 73 Sun L, Kong W, Jiang Y, et al.Journal of Materials Chemistry A, 2015, 3 (10), 5305. 74 Zhai P Y, Huang J Q, Zhu L, et al.Carbon, 2017, 111, 493. 75 Kim S, Song H, Jeong Y. Carbon, 2017, 113, 371. 76 Zeng L, Pan F, Li W, et al.Nanoscale,2014, 6 (16), 9579. 77 Zhu L, Peng H J, Liang J, et al.Nano Energy, 2015, 11, 746. 78 Xiang M, Wu H, Liu H, et al.Advanced Functional Materials, 2017, 27 (37), 1702573. 79 Zhao X, Kim M, Liu Y, et al.Carbon, 2018, 128, 138. 80 Chen Y, Lu S, Wu X, et al.The Journal of Physical Chemistry C, 2015, 119 (19), 10288. 81 Zhou G, Zhao Y, Manthiram A.Advanced Energy Materials, 2015, 5 (9), 1402263. 82 Lu Y, Jia Y, Zhao S, et al.ACS Applied Energy Materials, 2019, 2 (6), 4151. 83 Liu R, Liu Y, Chen J, et al.Nano Energy,2017, 33, 325. 84 Quartarone E, Mustarelli P.Chemical Society Reviews, 2011, 40 (5), 2525. 85 Jin J, Wen Z, Liang X, et al.Solid State Ionics, 2012, 225, 604. 86 Zhang S S.Journal of the Electrochemical Society, 2013, 160 (9), A1421. 87 Zhang Y, Zhao Y, Bakenov Z, et al.Journal of Solid State Electrochemistry, 2014, 18 (4), 1111. 88 Liu M, Jiang H R, Ren Y X, et al.Electrochimica Acta, 2016, 213, 871. 89 Huang H, Ding F, Zhong H, et al.Journal of Materials Chemistry A, 2018, 6 (20), 9539. 90 Song A, Huang Y, Zhong X, et al.Journal of Membrane Science, 2018, 556, 203. 91 Kim J G, Son B, Mukherjee S, et al. Journal of Power Sources, 2015, 282, 299. 92 Zhang Y, Zhao Y, Gosselink D, et al. Ionics, 2014, 21 (2), 381. 93 Lin Y, Wang X M, Liu J, et al. Nano Energy, 2017, 31, 478. 94 Lin Y, Li J, Liu K, et al. Green Chemistry, 2016, 18 (13), 3796. 95 Lim Y J, Kim H W, Lee S S, et al. ChemPlusChem, 2015, 80 (7), 1100. 96 Zhai H, Xu P, Ning M Q, et al. Nano Letters, 2017, 17 (5), 3182. 97 Dai J, Fu K, Gong Y, et al. ACS Materials Letters, 2019, 1 (3), 354. 98 Shen Y, Zhang Y, Han S, et al.Joule,2018, 2 (9), 1674. 99 Yao M, Wang R, Zhao Z, et al.ACS Nano,2018, 12 (12), 12503. 100 Wang J N, Yang G R, Chen J, et al. Advanced Energy Materials, 2019, 9(38), 1902001. 101 Fang X, Weng W, Ren J, et al. Advanced Materials, 2016, 28 (3), 491. 102 Hu L, Pasta M, Mantia F L, et al. Nano Letters,2010, 10 (2), 708. 103 Lee Y H, Kim J S, Noh J, et al. Nano Letters,2013, 13 (11), 5753. |
|
|
|