镁基复合材料高温变形研究进展

doi:10.11896/j.issn.1005-023X.2018.17.017

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (2329KB)
Export: BibTeX | EndNote (RIS)

Abstract  Various types (particle, whisker and fiber) reinforced magnesium matrix composites have been extensively studied since the early 1980s due to their excellent designability as well as outstanding mechanical and physical properties, including low density, high specific stiffness, low thermal expansion coefficient, favorable damping capability, significant shock resistance and excellent electromagnetic shielding performance. As a light metal matrix composite, magnesium matrix composites are highly competitive in advanced technology field, which possess extensive prospect in aerospace, military, automotive, electronics and other applications.
   Nevertheless, the plastic deformation capability of magnesium alloy is quite poor, due to close-packed hexagonal structure and limited slip system at ambient temperature. Moreover, incompatibility caused by the difference of physical and chemical properties in hard phase reinforcements and the magnesium matrix alloy would further deteriorate the plastic deformation capability of magnesium composites, which may limit the application of magnesium composites to large extent. Therefore, it is of great importance to carry out the studies on hot deformation of magnesium composites. Previous studies about hot deformation of magnesium composites at home and abroad are mainly focused on the effects of deformation parameters on the deformation behaviors, the phenomena of work hardening and dynamic recrystallization during the hot deformation process, as well as establishment of constitutive equation.
   Generally, there are five common hot deformation modes of magnesium composites, including superplastic deformation, hot compression, thermal cycling deformation, high temperature creep and secondary hot deformation. Plenty of studies on various hot deformation have been conducted and remarkable progress has been achieved over the years. Furthermore, thanks to its relatively simple deformation process, the hot compression of magnesium composites has attracted more attentions from researchers. In recent years, researchers have studied the influence of different hot deformation methods on microstructure and properties of magnesium composites, as well as the effect of deformation parameters including deformation strain, temperature and strain rate on hot deformation behavior of magnesium composites. In addition, the microstructure evolution and relevant deformation mechanisms of magne-sium composites during the hot deformation process have been investigated, and the corresponding constitutive equations have been established combined with numerical analysis. These research results would provide great supports for the determination and optimization of hot deformation processing of magnesium composites, and contribute to controlling the microstructure and properties of magnesium composites effectively.
   Different kinds of hot deformation of magnesium matrix composites are introduced. The constitutive equation as well as softening mechanism of hot deformation of magnesium matrix composites are explained in detail. Finally, the critical research directions and the remaining challenges to be addressed are summarized.

Key words： magnesium composites hot deformation constitutive equation softening mechanism

Published: 19 September 2018

CLC number:

TB331

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Pingping
	ZHANG Jingjing

Cite this article:

WU Pingping,ZHANG Jingjing. Advances in Hot Deformation Studies of Magnesium Matrix Composites[J]. Materials Reports, 2018, 32(17): 3041-3050.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.17.017 OR http://www.mater-rep.com/EN/Y2018/V32/I17/3041

1 Gupta M, Sharon N M L. Magnesium, magnesium alloys, and magnesium composites[M].New Jersey: John Wiley & Sons,2010.
2 Zhao Y, Dong G, Zhao B. Research progress of magnesium alloy application in aviation manufacturing[J].Nonferrous Metals Enginee-ring,2015,5(2):23(in Chinese).
赵怿,董刚,赵博.镁合金在航空领域应用的研究进展[J].有色金属工程,2015,5(2):23.
3 Li Z, Luo A A, Wang Q, et al. Fatigue characteristics of sand-cast AZ91D magne-sium alloy[J].Journal of Magnesium & Alloys,2017,5(1):1.
4 Yin D L, Qiao J, Cui H L. Effect of artificial aging on microstructures and mechanical properties of extruded Mg alloy ZK60[J].Applied Mechanics & Materials,2014,697:72.
5 Cao F, Song G L, Atrens A. Corrosion and passivation of magne-sium alloys[J].Corrosion Science,2016,111:835.
6 Taltavull C, Rodrigo P, Torres B, et al. Dry sliding wear behavior of AM50B magnesium alloy[J].Materials & Design,2014,56(4):549.
7 Hu H J, Sun Z, Ou Z W, et al. Wear behaviors and wear mechanisms of wrought magnesium alloy AZ31 fabricated by extrusion-shear[J].Engineering Failure Analysis,2017,72:25.
8 Govindaraju M, Balasubramanian K, Chackingal U, et al. Effect of severe plastic deformation and heat treatment on toughness of magnesium alloys[J].Procedia Materials Science,2014,6:37.
9 Pandey K M, Dey A. Magnesium metal matrix composites—A review[J].Reviews on Advanced Materials Science,2015,42(1):58.
10 Anasori B, Barsoum M W. Energy damping in magnesium alloy composites reinforced with TiC or Ti₂AlC particles[J].Materials Science & Engineering A,2016,653:53.
11 Dezfuli S N, Huan Z, Mol A, et al. Advanced bredigite-containing magnesium-matrix composites for biodegradable bone implant applications[J].Materials Science & Engineering C,2017,79:647.
12 Turan M E, Sun Y, Akgul Y, et al. The effect of GNPs on wear and corrosion behaviors of pure magnesium[J].Journal of Alloys & Compounds,2017,724:14.
13 García-Rodríguez S, Torres B, Maroto A, et al. Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp compo-sites[J].Wear,2017,390-391:1.
14 Han G Q, Shen J H, Ye X X, et al. The influence of CNTs on the microstructure and ductility of CNT/Mg composites[J].Materials Letters,2016,181:300.
15 Yang X, Huang Y, Barekar N S, et al. High shear dispersion technology prior to twin roll casting for high performance magnesium/SiCp metal matrix composite strip fabrication[J].Composites Part A,2016,90:349.
16 Sahoo B N, Panigrahi S K. Synthesis, characterization and mechanical properties of in-situ (TiC-TiB₂) reinforced magnesium matrix composite[J].Materials & Design,2016,109:300.
17 Inoue Y, Jae-Ho K, Yonezawa S, et al. Enhanced mechanical strength of nickel-copper-coated carbon fiber/magnesium alloy composites fabricated using powder metallurgy[J].Chemistry Letters,2012,41(5):531.
18 Yang Y, Zhao Y, Kai X, et al. Superplasticity behavior and defor-mation mechanism of the in-situ Al₃Zr/6063Al composites processed by friction stir processing[J].Journal of Alloys & Compounds,2017,710:225.
19 Torbati-Sarraf S A, Alizadeh R, Mahmudi R, et al. Evaluating the flow properties of a magnesium ZK60 alloy processed by high-pressure torsion: A comparison of two different miniature testing techniques[J].Materials Science & Engineering A,2017,708:432.
20 Watanabe H, Fukusumi M, Ishikawa K, et al. Superplasticity in a fullerene-dispersed Mg-Al-Zn alloy composite[J].Scripta Materialia,2006,54(9):1575.
21 Mukai T, Nieh T G, Iwasaki H, et al. Superplasticity in doubly extruded magnesium composite ZK60/SiC/17p[J].Materials Science & Technology,2013,14(1):32.
22 Higashi K. High strain rate superplasticity in Japan[J].Materials Science & Technology,2013,16(11-12):1320.
23 Zhu Y, Jin P, Zhao P, et al. Hot deformation behavior of Mg₂B₂O₅ whiskers reinforced AZ31B magnesium composite fabricated by stir-casting[J].Materials Science & Engineering:A,2013,573(3):148.
24 Rashad M, Pan F, Liu Y, et al. High temperature formability of graphene nanoplatelets-AZ31 composites fabricated by stir-casting method[J].Journal of Magnesium & Alloys,2016,4(4):270.
25 Hao S M, Xie J P, Wang A Q, et al. Hot deformation behaviors of 35% SiCp/2024Al metal matrix composites[J].Transactions of Nonferrous Metals Society of China,2014,24(8):2468.
26 Wang Z, Huang B, Qi L, et al. Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process[J].Journal of Alloys & Compounds,2017,708:328.
27 Liu D, Liu Y, Zhao Y, et al. The hot deformation behavior and microstructure evolution of HA/Mg-3Zn-0.8Zr composites for biome-dical application[J].Materials Science & Engineering C,2017,77:690.
28 Suresh K, Dharmendra C, Rao K P, et al. Processing map of AZ31-1Ca-1.5vol.% nano-alumina composite for hot working[J].Materials & Manufacturing Processes,2015,30(10):1161.
29 Qu H, Hou H, Li P, et al. The effect of thermal cycling in superplastic diffusion bonding of heterogeneous duplex stainless steel[J].Materials & Design,2016,96:499.
30 Li D, Chen G, Jiang L, et al. Effect of thermal cycling on the mechanical properties of Cf/Al composites[J].Materials Science & Engineering A,2013,586(6):330.
31 Syed A K, Zhang X, Moffatt J E, et al. Effect of temperature and thermal cycling on fatigue crack growth in aluminium reinforced with glare bonded crack retarders[J].International Journal of Fatigue,2017,98:53.
32 Jin P P, Zhang F, Guo Y H, et al. Effect of applied stress combined with thermal cycling on plasticity of Mg₂B₂O_5w/AZ31B composites[J].Transactions of Nonferrous Metals Society of China,2012,22(10):2768.
33 Shi Y, Jin P, Wang J. Effect of thermal cycling combined with applied stresses on deformation behavior of ZnO/Mg₂B₂O_5w/AZ91D composite[J].Foundry Technology,2013,34(6):668(in Chinese).
师亚娟,金鹏培,王金辉.加载热循环对ZnO/Mg₂B₂O_5w/AZ91D复合材料变形的影响[J].铸造技术,2013,34(6):668.
34 Zhu S M, Gibson M A, Easton M A, et al. The relationship between microstructure and creep resistance in die-cast magnesium-rare earth alloys[J].Scripta Materialia,2010,63(7):698.
35 Han L I, Du W B, Li J H, et al. Creep properties and controlled creep mechanism of as-cast Mg-5Zn-2.5Er alloy[J].Transactions of Nonferrous Metals Society of China,2010,20(7):1212.
36 Labib F, Mahmudi R, Ghasemi H M. Impression creep behavior of extruded Mg-SiCp composites[J].Materials Science & Engineering A,2015,640:91.
37 Tian J, Shi Z Q. Creep mechanism and creep constitutive model of aluminum silicate short-fiber-reinforced magnesium matrix composite[J].Transactions of Nonferrous Metals Society of China,2014,24(3):632.
38 Katsarou L, Mounib M, Lefebvre W, et al. Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirring[J].Materials Science & Engineering A,2016,659:84.
39 Deng K K, Li J C, Fan J F, et al. Interfacial characteristic of as-deformed SiCp-reinforced magnesium matrix composite[J].Transactions of Nonferrous Metals Society of China,2014,27(5):885.
40 Zhang L, Wang Q, Liao W, et al. Effects of cyclic extrusion and compression on the microstructure and mechanical properties of AZ91D magnesium composites reinforced by SiC nanoparticles[J].Materials Characterization,2017,126:17.
41 Sabetghadam-Isfahani A, Abbasi M, Sharifi S M H, et al. Microstructure and mechanical properties of carbon nanotubes/AZ31 magnesium composite gas tungsten arc welding filler rods fabricated by powder metallurgy[J].Diamond & Related Materials,2016,69:160.
42 Daudin R, Terzi S, Mallmann C, et al. Indirect improvement of high temperature mechanical properties of a Mg-based alloy Elektron21 by addition of AlN nanoparticles[J].Materials Science & Enginee-ring A,2017,688:76.
43 Selvam B, Marimuthu P, Narayanasamy R, et al. Dry sliding wear behaviour of zinc oxide reinforced magnesium matrix nano-compo-sites[J].Materials & Design,2014,58(6):475.
44 Zhang H, Zhao Y, Yan Y, et al. Microstructure evolution and mechanical properties of Mg matrix composites reinforced with Al and nano SiC particles using spark plasma sintering followed by hot extrusion[J].Journal of Alloys & Compounds,2017,725:652.
45 Shen M J, Wang X J, Zhang M F, et al. Significantly improved strength and ductility in bimodal-size grained microstructural magnesium matrix composites reinforced by bimodal sized SiCp over traditional magnesium matrix composites[J].Composites Science & Technology,2015,118:85.
46 Xiang S L, Gupta M, Wang X J, et al. Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets[J].Composites Part A Applied Science & Ma-nufacturing,2017,100:183.
47 Garcés G, Máthis K, Pérez P, et al. Effect of reinforcing shape on twinning in extruded magnesium matrix composites[J].Materials Science & Engineering A,2016,666:48.
48 Guo W, Wang Q, Ye B, et al. Enhanced microstructure homogeneity and mechanical properties of AZ31-Si composite by cyclic closed-die forging[J].Journal of Alloys & Compounds,2013,552(10):409.
49 Deng S Q, Yang L, Wang Y L, et al. Study on microstructure and properties of TiCp/Mg composite material prepared by combination of powder metallurgy and multiple forging[J].Light Alloy Fabrication Technology,2016,44(7):48(in Chinese).
邓世岐,杨琳,王亚丽,等.粉末冶金结合多向锻造制备TiCp/Mg复合材料的组织和性能研究[J].轻合金加工技术,2016,44(7):48.
50 Johnson G R, Cook W H. Lagrangian EPIC code computations for oblique, yawed-rod impacts onto thin-plate and spaced-plate targets at various velocities[J].International Journal of Impact Engineering,1993,14(1-4):373.
51 Sellars C M, Mctegart W J. On the mechanism of hot deformation[J].Acta Metallurgica,1966,14(9):1136.
52 Garofalo F, Butrymowicz D B. Fundamentals of creep and creep-rupture in metals[J].Physics Today,1966,19(5):100.
53 Zener C, Hollomon J H. Effect of strain rate upon plastic flow of steel[J].Journal of Applied Physics,1944,15(1):22.
54 Liu R, Cao W, Fan T, et al. Development of processing maps for 3 vol.% TiCp/AZ91D composites material[J].Materials Science & Engineering A,2010,527(18-19):4687.
55 Deng K K, Li J C, Xu F J, et al. Hot deformation behavior and processing maps of fine-grained SiCp/AZ91 composite[J].Materials & Design,2015,67:72.
56 Wang Z, Qi L, Wang G, et al. Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation[J].Mechanics of Materials,2016,102:90.
57 Zhong T, Rao K P, Prasad Y V R K, et al. Hot deformation mechanisms, microstructure and texture evolution in extruded AZ31-nano-alumina composite[J].Materials Science & Engineering A,2014,589(2):41.
58 Liu Z Y, Huang T T, Liu W J, et al. Dislocation mechanism for dynamic recrystallization in twin-roll casting Mg-5.51Zn-0.49Zr magnesium alloy during hot compression at different strain rates[J].Tran-sactions of Nonferrous Metals Society of China,2016,26(2):378.
59 Cai Z, Chen F, Ma F, et al. Dynamic recrystallization behavior and hot workability of AZ41M magnesium alloy during hot deformation[J].Journal of Alloys & Compounds,2016,670(3):55.
60 Xu W, Jin X, Shan D, et al. Study on the effect of solution treatment on hot deformation behavior and workability of Mg-7Gd-5Y-0.6Zn-0.8Zr magnesium alloy[J].Journal of Alloys & Compounds,2017,720:309.
61 Cai Y, Wan L, Guo Z H, et al. Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities[J].Materials Science & Engineering A,2017,687:113.
62 Mirzadeh H. Constitutive behaviors of magnesium and Mg-Zn-Zr alloy during hot deformation[J].Materials Chemistry & Physics,2015,152:123.
63 Fan J F, Hua Z, Dong H, et al. Effects of processing technologies on mechanical properties of SiC particulate reinforced magnesium matrix composites[J].Journal of Wuhan University of Technology,2014,29(4):769.
64 Yu W, Zhao H, Wang X, et al. Synthesis and characterization of textured Ti₂AlC reinforced magnesium composite[J].Journal of Alloys & Compounds,2017,730:68.
65 Paramsothy M, Chan J, Kwok R, et al. Enhanced mechanical response of magnesium alloy ZK60A containing Si₃N₄ nanoparticles[J].Composites Part A: Applied Science & Manufacturing,2011,42(12):2093.66 Zhou S S, Deng K K, Li J C, et al. Hot deformation behavior and workability characteristics of bimodal size SiCp/AZ91 magnesium matrix composite with processing map[J].Materials & Design,2014,64(64):177.
67 Zhang L, Wang Q, Liu G, et al. Effect of SiC particles and the particulate size on the hot deformation and processing map of AZ91 magnesium matrix composites[J].Materials Science & Engineering A,2017,707(7):315.
68 Shen M J, Wang X J, Ying T, et al. Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles[J].Journal of Alloys & Compounds,2016,686:831.
69 Zhu Y P, Jin P P, Fei W D, et al. Effects of Mg₂B₂O₅ whiskers on microstructure and mechanical properties of AZ31B magnesium matrix composites[J].Materials Science & Engineering A,2016,684(27):205.
70 Wang X J, Hu X S, Nie K B, et al. Hot extrusion of SiCp/AZ91 Mg matrix composites[J].Transactions of Nonferrous Metals Society of China,2012,22(8):1912.
71 Mirzadeh H. Constitutive analysis of Mg-Al-Zn magnesium alloys during hot deformation[J].Mechanics of Materials,2014,77(77):80.
72 Su Z, Wan L, Sun C, et al. Hot deformation behavior of AZ80 magnesium alloy towards optimization of its hot workability[J].Mate-rials Characterization,2016,122:90.
73 Abbassi F, Srinivasan M, Loganathan C, et al. Experimental and numerical analyses of magnesium alloy hot workability[J].Journal of Magnesium & Alloys,2016,4(4):295.