β钛合金成分设计:理论、方法、实践

doi:10.11896/j.issn.1005-023X.2017.03.008

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (1414KB)
Export: BibTeX | EndNote (RIS)

Abstract There is a considerable fervor occurring among developed counties on high performance titanium alloys. β-type titanium alloys are for sure received the most attention along with the awareness and acceptance of various methods of materials design. It is then the focus of this work to introduce several common and important issues regards to the design of β-type titanium alloys, including the basic principle of composition design, the effects of alloying on microstructure and properties, the coefficient K_β, Al and Mo equivalent, electron concentration and d-electron alloy design theory. And we have revealed that these issues promised great potential applications in the fields of high strength structures, low modulus biomedical implants and low cost products as well.

Key words： β-type titanium alloys composition design aerospace material biomedical material

Published: 02 May 2018

CLC number:	TB31
	TG146.23

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Guangrong
	GAO Qi
	LIU Jixiong
	YANG Qi
	WANG Dingchun
	YAO Rui
	LIAO Songyi
	ZHENG Feng

Cite this article:

WANG Guangrong,GAO Qi,LIU Jixiong, et al. Composition Design of Beta-titanium Alloys: Theoretical, Methodological and Practical Advances[J]. Materials Reports, 2017, 31(3): 44-51.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.03.008 OR http://www.mater-rep.com/EN/Y2017/V31/I3/44

1 Niinomi M, Narushima T, Nakai M. Advances in metallic biomaterials[M].Berlin: Springer, 2015.
2 Yu Zhentao, Zhou Lian, Wang Keguang. Development and design of β-type titanium alloys for medical use[J]. Rare Metals Lett,2004 (1):5(in Chinese).
于振涛,周廉,王克光.生物医用型 β 型钛合金的设计与开发[J]. 稀有金属快报,2004(1):5.
3 Zeng Liying, Ge Peng. Progress in high strength titanium alloys for springs[J]. Titanium Ind Prog,2009,26(5):5(in Chinese).
曾立英, 葛鹏. 弹簧用高强钛合金的研究进展[J].钛工业进展,2009,26(5):5.
4 赵永庆,陈永楠,张学敏,等. 钛合金相变及热处理[M].长沙:中南大学出版社,2012.
5 Weiss I, Semiatin S L. Thermomechanical processing of beta tita-nium alloys—An overview[J]. Mater Sci Eng A,1998,243(1):46.
6 Jayaprakash M,Ping D H,Yamabe-Mitariai Y. Effect of Zr and Si addition on high temperature mechanical properties of near-α Ti-Al-Zr-Sn based alloys[J].Mater Sci Eng A,2014,612:456.
7 Zhu Zhishou, Ma Jimin, Gao Yang, et al. Effect of Nd-rich second phase particles on fracture behaviors of a near-α titanium alloy[J]. J Aeronaut Mater,2000,20(3):27(in Chinese).
朱知寿,马济民,高扬,等.富Nd 第二相颗粒对钛合金拉伸断裂方式的影响[J].航空材料学报,2000,20(3):27.
8 Zhao Yongqing, Liu Junlin, Zhou Lian. Analysis on the segregation of typical alloying elements of Cu, Fe and Cr in Ti alloys[J]. Rare Metal Mater Eng,2005,34(4):531 (in Chinese).
赵永庆,刘军林,周廉.典型 β 型钛合金元素Cu, Fe和Cr的偏析规律[J].稀有金属材料与工程,2005,34(4):531.
9 莫畏.钛[M].北京:冶金工业出版社,2008.
10 Guo S, Ng C, Lu J, et al. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys[J]. J Appl Phys,2011,109(10):103505.
11 Morinaga M, Kato M, Kamimura T, et al. Theoretical design of beta-type titanium alloys[C]//Titanium′92: Science and Technology, Proc. 7th Int Conf.on Titanium.San Diego,1992:217.
12 Wang Qingjuan, Gao Qi, Wang Kuaishe, et al. Application of d-electronic alloy theory in design of titanium alloy[J]. Hot Work Technol,2013,42(12):14 (in Chinese).
王庆娟,高颀,王快社,等.d-电子合金理论在钛合金设计中的应用[J].热加工工艺,2013,42(12):14.
13 Abdel-Hady M, Hinoshita K, Morinaga M. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters[J]. Scripta Mater,2006,55(5):477.
14 Zhao Lichen, Cui Chunxiang, Liu Shuangjin, et al. Design and research on properties of new type metastable β-titanium alloys for biomedical applications based on the d-electron alloy design method[J]. Rare Metal Mater Eng,2008,37(1):108(in Chinese).
赵立臣,崔春翔,刘双进,等.基于d电子合金设计方法的生物医用新型亚稳 β 钛合金的设计及性能研究[J]. 稀有金属材料与工程,2008,37(1):108.
15 Dai S, Yu W, Feng C, et al. Design of new biomedical titanium alloy based on d-electron alloy design theory and JMatPro software[J]. Trans Nonferrous Met Soc China,2013,23(10):3027.
16 Kuramoto S, Furuta T, Hwang J H, et al. Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy[J]. Metall Mater Trans A,2006,37(3):657.
17 Lu J, Zhao Y, Ge P, et al. Precipitation behavior and tensile properties of new high strength beta titanium alloy Ti-1300[J]. J Alloys Compd,2015,637:1.
18 Sun F, Zhang J Y, Marteleur M, et al. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility[J]. Scripta Mater,2015,94:17.
19 Marteleur M, Sun F, Gloriant T, et al. On the design of new β-me-tastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects[J]. Scripta Mater,2012,66(10):749.
20 Brozek C, Sun F, Vermaut P, et al. A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties[J]. Scripta Mater,2016,114:60.
21 Fan J, Li J, Kou H, et al. Influence of solution treatment on microstructure and mechanical properties of a near β titanium alloy Ti-7333[J]. Mater Design,2015,83:499.
22 Li C L, Mi X J, Ye W J, et al. A study on the microstructures and tensile properties of new beta high strength titanium alloy[J]. J Alloys Compd,2013,550:23.
23 Zhu Zhishou. Recent research and development of titanium alloys for aviation application in China[J]. J Aeronaut Mater,2014,34(4):44(in Chinese).
朱知寿.我国航空用钛合金技术研究现状及发展[J]. 航空材料学报,2014,34(4):44.
24 Du Z, Xiao S, Xu L, et al. Effect of heat treatment on microstructure and mechanical properties of a new β high strength titanium alloy[J]. Mater Des,2014,55:183.
25 Ivasishin O M, Markovsky P E, Matviychuk Y V, et al. A comparative study of the mechanical properties of high-strength β-titanium alloys[J]. J Alloys Compd,2008,457(1):296.
26 Yu Zhentao, Han Jianye, Ma Xiqun, et al. Biological and mechanical compatibility of biomedical titanium alloy materials[J]. J Clinical Rehabilitative Tissue Eng Res,2013,17(25):4707(in Chinese).
于振涛,韩建业,麻西群,等.生物医用钛合金材料的生物及力学相容性[J].中国组织工程研究,2013,17(25):4707.
27 Niinomi M, Nakai M, Hieda J. Development of new metallic alloys for biomedical applications[J]. Acta Biomater,2012,8(11):3888.
28 Wang K. The use of titanium for medical applications in the USA[J]. Mater Sci Eng A,1996,213(1):134.
29 Geetha M, Singh A K, Asokamani R, et al. Ti based biomaterials, the ultimate choice for orthopaedic implants-A review[J]. Prog Mater Sci,2009,54(3):397.
30 Rack H J, Qazi J I. Titanium alloys for biomedical applications[J]. Mater Sci Eng C,2006,26(8):1269.
31 Dai Shijuan, Zhu Yuntian, Chen Feng. Present status and processing methods of novel β titanium alloys for biomedical applications[J]. J Chongqing Institute of Technology,2016,30(4):006(in Chinese).
戴世娟,朱运田,陈锋.新型医用β钛合金研究的发展现状及加工方法[J].重庆理工大学学报:自然科学版,2016,30(4):006.
32 Zhang Wenyu. The research progress of biomedical titanium alloy[J]. Chem Adhes,2014,36(5):369(in Chinese).
张文毓.生物医用钛合金的研究进展[J].化学与粘合,2014,36(5):369.
33 Yu Zhentao, Zhang Minghua, Yu Sen, et al. Analysis of R&D, production and application of biomedical Ti alloys materials applied in medical devices of China[J]. China Medical Device Information,2012,18(7):1(in Chinese).
于振涛,张明华,余森,等.中国医疗器械用钛合金材料研发,生产与应用现状分析[J].中国医疗器械信息,2012,18(7):1.
34 Hao Y L, Yang R, Niinomi M, et al. Young′s modulus and mecha-nical properties of Ti-29Nb-13Ta-4.6 Zr in relation to α ″martensite[J]. Metall Mater Trans A,2002,33(10):3137.
35 Ma Xiqun, Yu Zhentao, Niu Jinlong, et al. Development of microstructure and properties of novel biomedical titanium alloys[J]. Bio-med Eng Clinical Medicine,2013,17(6):610(in Chinese).
麻西群,于振涛,牛金龙,等.新型生物医用钛合金组织与性能研究进展[J]. 生物医学工程与临床,2013,17(6):610.
36 Zhao X, Niinomi M, Nakai M, et al. Optimization of Cr content of metastable β-type Ti-Cr alloys with changeable Young′s modulus for spinal fixation applications[J]. Acta Biomater,2012,8(6):2392.
37 Zhao X, Niinomi M, Nakai M, et al. Microstructures and mechanical properties of metastable Ti-30Zr-(Cr, Mo) alloys with changeable Young′s modulus for spinal fixation applications[J]. Acta Biomater,2011,7(8):3230.
38 Jing R, Liang S X, Liu C Y, et al. Aging effects on the microstructures and mechanical properties of the Ti-20Zr-6.5 Al-4V alloy[J]. Mater Sci Eng A,2013,559:474.
39 Liang S X, Ma M Z, Jing R, et al. Preparation of the ZrTiAlV alloy with ultra-high strength and good ductility[J]. Mater Sci Eng A,2012,539:42.
40 Liang S X, Yin L X, Zheng L Y, et al. Preparation of low cost TiZrAlFe alloy with ultra-high strength and favorable ductility[J]. Mater Sci Eng A,2015,639:699.
41 Ikeda M, Ueda M, Imaizumi K, et al. Phase constitution and heat treatment behavior of low cost Ti-Mn system alloys[J]. Key Eng Mater,2013,551:217.
42 Santos P F, Niinomi M, Cho K, et al. Microstructures, mechanical properties and cytotoxicity of low cost beta Ti-Mn alloys for biome-dical applications[J]. Acta Biomater,2015,26:366.
43 Abd-elrhman Y, Gepreel M A H, Abdel-Moniem A, et al. Compatibility assessment of new V-free low-cost Ti-4.7 Mo-4.5 Fe alloy for some biomedical applications[J]. Mater Des,2016,97:445.
44 Zhu K, Gui N, Jiang T, et al. The development of the Low-cost titanium alloy containing Cr and Mn alloying elements[J]. Metall Mater Trans A,2014,45(4):1761.
45 Zhang W, Zhu Z, Cheng C Y. A literature review of titanium metallurgical processes[J]. Hydrometallurgy,2011,108(3):177.
46 Suzuki K. An introduction to the extraction, melting and casting technologies of titanium alloys[J]. Metals Mater Int,2001,7(6):587.
47 Li Xianmin, Liu Li, Dong Jie, et al. Discussion on economic analysis and decreasing cost process of titanium and titanium alloys[J]. Mater China,2015,34(5):401(in Chinese).
李献民,刘立,董洁,等.钛及钛合金材料经济性及低成本方法论述[J].中国材料进展,2015,34(5):401.
48 Han Yi, Li Lian, Deng Zhenzhen, et al. Constituent optimization of Al-Zn-Mg-Cu alloy based on thermodynamic calculation method[J]. Chinese J Nonferrous Metals,2011,21(1):179(in Chinese).
韩逸,李炼,邓桢桢,等.热力学计算优化 Al-Zn-Mg-Cu 合金成分[J].中国有色金属学报,2011,21(1):179.
49 Wang Y Z, Ma N, Chen Q, et al. Predicting phase equilibrium, phase transformation, and microstructure evolution in titanium alloys[J]. JOM,2005,57(9):32.
50 Zhang F, Xie F Y, Chen S L, et al. Predictions of titanium alloy properties using thermodynamic modeling tools[J]. J Mater Eng Perform,2005,14(6):717.
51 Han Y, Zeng W, Sun Y, et al. Development of a database system for operational use in the selection of titanium alloys[J]. Int J Miner Metall Mater,2011,18(4):444.
52 Malinov S, Sha W. Application of artificial neural networks for mo-delling correlations in titanium alloys[J]. Mater Sci Eng A,2004,365(1):202.