| INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
| Research Progress of RFID Sensor Tag Preparation Technology |
| ZHANG Yongfang1, LI Liang1, DONG Lihong2,*, WANG Haidou3,*, WANG Peng2, XIE Xiangyu2
|
1 School of Printing, Packaging and Digital Media, Xi’an University of Technology, Xi’an 710054, China
2 National Defense Science and Technology Key Laboratory of Equipment Remanufacturing Technology, Army Armored Corps Academy, Beijing 100721, China
3 National Engineering Research Center for Remanufacturing, Beijing 100721, China |
|
|
|
|
Abstract Radio frequency identification (RFID) is one of the key technologies in the perception layer of the Internet of Things and has the function of non-contact automatic identification. In recent years, RFID technology has developed rapidly in the field of structural health monitoring, which has attracted extensive attention and research by researchers. The combination of RFID technology and sensing technology, the prepared sensor tag has the advantages of passive wireless transmission, long life and low cost, and is widely used in structural monitoring, environmental monitoring, health monitoring, fluid detection and other fields. At present, the mainstream preparation processes of RFID sensor tags include conductive ink printing method, flexible circuit board preparation method, etc. The choice of preparation process further affects the sensing and communication functions of RFID tags. Starting from the principles of flexible circuit board technology, screen printing technology, and inkjet prin-ting technology, this paper summarizes the development process of these three processes to prepare RFID sensor labels, and analyzes the challenges they face in the preparation of RFID sensor labels. At the same time, the preparation of the RFID sensor tag antenna layer by these three processes is summarized, and on this basis, the future development prospects of the three processes for the preparation of RFID sensor tags are prospected.
|
|
Published: 25 November 2023
Online: 2023-11-21
|
|
|
| Fund:Key Project (2021-JCJQ-ZD-302) and National Natural Science Foundation of China (52175206, 52130509). |
|
|
1 Du Shanyi, Zhang Boming. Acta Astronautica, 2007(4), 773(in Chinese).
杜善义, 张博明. 宇航学报, 2007(4), 773.
2 Han Yazhou. Research on deformation monitoring method of a super high-rise building. Master's Thesis, Hefei University of Technology, China, 2020(in Chinese).
韩亚洲. 某超高层建筑结构变形监测方法研究. 硕士学位论文, 合肥工业大学, 2020.
3 Liao Wei. Research on key issues of bridge structure bearing capacity evaluation based on health monitoring system. Master's Thesis, South China University of Technology, China, 2016(in Chinese).
廖威. 基于健康监测系统的桥梁结构承载能力评估关键问题研究. 硕士学位论文, 华南理工大学, 2016.
4 Yang Zhenyao. Research on the health monitoring technology of rail bottom structure based on ultrasonic guided waves. Master's Thesis, Zhejiang University, China, 2016(in Chinese).
杨臻垚. 基于超声导波的钢轨轨底结构健康监测技术研究. 硕士学位论文, 浙江大学, 2016.
5 Qing Xinlin, Liu Qiheng, Zhang Yuqiang, et al. Journal of Xiamen University, 2021, 60(3), 614(in Chinese).
卿新林, 刘琦牮, 张雨强, 等. 厦门大学学报, 2021, 60(3), 614.
6 Hu Xianlei. Shandong Transportation Science and Technology, 2021(2), 28(in Chinese).
胡先磊. 山东交通科技, 2021(2), 28.
7 Wei Bin. Research on health monitoring technology of track beam structure in Zhengzhou high-speed railway station. Master's Thesis, Nanjing University of Science and Technology, China, 2015(in Chinese).
魏斌. 郑州高铁站轨道梁结构健康监测技术研究. 硕士学位论文, 南京理工大学, 2015.
8 Tian Guiyun, Zhang Jun, Meng Zhaozong. Journal of Nanjing University of Aeronautics and Astronautics, 2017, 49(4), 453(in Chinese).
田贵云, 张俊, 孟召宗. 南京航空航天大学学报, 2017, 49(4), 453.
9 Want R. IEEE Pervasive Computing, 2006, 5(1), 25.
10 Qi Junpeng, Tian Mengfan, Ma Rui. Science, Technology and Enginee-ring, 2019, 19(29), 1(in Chinese).
齐俊鹏, 田梦凡, 马锐. 科学技术与工程, 2019, 19(29), 1.
11 Rivadeneyra A, Salmeron J F, Rodriguez N, et al. In:2020 50th European Microwave Conference. Utrecht, The Netherlands, 2021, pp. 812.
12 Machiels J, Verma A, Appeltans R, et al. Procedia CIRP, 2021, 96, 115.
13 Baek J J, Kim S W, Park K H, et al. IEEE Microwave and Wireless Components Letters, 2018, 28(12), 1074.
14 Fu Jingjuan, Yao Jun. Sensors and Microsystems, 2021, 40(11), 88(in Chinese).
付靖娟, 姚俊. 传感器与微系统, 2021, 40(11), 88.
15 Yan Chuan. Research on roll-to-roll preparation technology of fully printed paper-based RFID. Master's Thesis, University of Electronic Science and Technology of China, China, 2019(in Chinese).
颜川. 全印制纸基RFID卷对卷制备技术研究. 硕士学位论文, 电子科技大学, 2019.
16 Zhong Tao. Design and application of flexible and stretchable RFID tags based on printed electronics technology. Master's Thesis, China Jiliang University, China, 2019(in Chinese).
钟涛. 基于印刷电子技术的柔性可拉伸RFID标签的设计与应用. 硕士学位论文, 中国计量大学, 2019.
17 Chen Hanbin. Research on the defect detection method of flexible circuit board based on machine vision. Master's Thesis, Jiangxi University of Science and Technology, China, 2021(in Chinese).
陈晗彬. 基于机器视觉的柔性电路板缺陷检测方法研究. 硕士学位论文, 江西理工大学, 2021.
18 Wang Zaiyue, Wang Jianan, An Kai, et al. Electronic World, 2021(8), 129(in Chinese).
王再跃, 汪建安, 安凯, 等. 电子世界, 2021(8), 129.
19 Wang Mingyue, Peng Jue, Tang Hu, et al. In: China Mechanics Confe-rence. Beijing Institute of Technology, 2017, pp. 808(in Chinese).
汪明月, 彭珏, 唐浒, 等. 中国力学大会. 北京理工大学, 2017, pp. 808.
20 Chen Xuan. Research and application of two types of monitoring problems in the manufacturing process of flexible circuit boards. Master's Thesis, South China University of Technology, China, 2018(in Chinese).
陈璇. 柔性电路板制造过程中两类监控问题的研究及其应用. 硕士学位论文, 华南理工大学, 2018.
21 Li Lu. Research on defect detection system of copper clad surface of high-density ultra-thin flexible integrated circuit packaging substrate. Master's Thesis, South China University of Technology, China, 2019(in Chinese).
李璐. 高密度超薄柔性集成电路封装基板覆铜表面缺陷检测系统研究. 硕士学位论文, 华南理工大学, 2019.
22 Cao Lina. Optimization research on direct printing of RFID tag antenna. Master's Thesis, Jiangnan University, China, 2013(in Chinese).
曹丽娜. RFID标签天线直接印刷的优化研究. 硕士学位论文, 江南大学, 2013.
23 Godlinski D, Zichner R, ZLlmer V, et al. Iet Microwaves Antennas & Propagation, 2017, 11(14), 2010.
24 Ostfeld A E, Deckman I, Gaikwad A M, et al. Scientific Reports, 2015, 5(1), 1.
25 Li Qingwei. Printing Industry, 2012, 7(12), 83(in Chinese).
李庆伟. 印刷工业, 2012, 7(12), 83.
26 Khan Y, Thielens A, Muin S, et al. Advanced Materials, 2020, 32(15), 1.
27 Geng Bowen. Fabrication of high-resolution flexible temperature sensor arrays by electrofluidic inkjet printing. Master's Thesis, Tianjin University, China, 2020(in Chinese).
耿博文. 电流体喷墨打印法制备高分辨率柔性温度传感器阵列. 硕士学位论文, 天津大学, 2020.
28 Liu Yang. Research and fabrication of flexible temperature sensors. Master's Thesis, University of Electronic Science and Technology of China, China, 2020(in Chinese).
刘杨. 柔性温度传感器的研究与制备. 硕士学位论文, 电子科技大学, 2020.
29 Mulloni V, Donelli M. Sensors, 2020, 20(7), 2135.
30 Li Jinlei. Research on the design and implementation of new sensor labels based on inkjet printing technology. Master's Thesis, Xidian University, China, 2020(in Chinese).
李金蕾. 基于喷墨打印技术的新型传感标签设计与实现技术研究. 硕士学位论文, 西安电子科技大学, 2020.
31 Yu Chao, Chen Chen, Wu Dan, et al. Liquid Crystal and Display, 2021, 36(1), 158(in Chinese).
于超, 陈琛, 吴丹, 等. 液晶与显示, 2021, 36(1), 158.
32 Karunakaran S K, Arumugam G M, Yang W, et al. Journal of Materials Chemistry A, 2019, 7(23), 13873.
33 Kang S H, Kim S, Sohn D K, et al. Physics of Fluids, 2020, 32(2), 022007.
34 Yang Kunchao. Optimization and control research of piezoelectric inkjet print head. Master's Thesis, University of Electronic Science and Technology of China, China, 2019(in Chinese).
杨坤潮. 压电喷墨打印头的优化与控制研究. 硕士学位论文, 电子科技大学, 2019.
35 Li J, Rossignol F, Macdonald J. Lab on a Chip, 2015, 15(12), 2538.
36 Bhaskar E V, Leban M, Hess U E, et al. U. S. Patent application US005635968A, 1997.
37 Zhao Jun, Chen Shuo, Shang Zhi. In:Proceedings of the 7th Annual Conference of Nanotechnology (1). Dalian, China, 2005, pp. 385.
赵钧, 陈硕, 尚智. 纳米技术第七届学术会年会论文集(一). 中国大连, 2005, pp. 385.
38 Foresti D, Kroll K T, Amissah R, et al. Science Advances, 2018, 4(8), eaat1659.
39 Chen Donghang. Design and key process of electrostatic jet printing head. Master's Thesis, Xiamen University, China, 2009(in Chinese).
陈栋杭. 静电喷印头的设计及关键工艺. 硕士学位论文, 厦门大学, 2009.
40 Wu Yang. Pattern analysis and printing planning of electro-fluid on-demand printing. Master's Thesis, Huazhong University of Science and Technology, China, 2015(in Chinese).
吴洋. 电流体按需喷印的图案解析与打印规划. 硕士学位论文, 华中科技大学, 2015.
41 Guo Lei. Droplet generation mechanism and regulation of electrofluidic on-demand printing. Master's Thesis, Huazhong University of Science and Technology, China, 2019(in Chinese).
郭磊. 电流体按需喷印的液滴生成机理与调控. 硕士学位论文, 华中科技大学, 2019.
42 Soliman E A, Sallam M O, Raedt W D, et al. IEEE Antennas & Wireless Propagation Letters, 2012, 11, 1068.
43 Hong Zhuanting. Method research and system implementation of FPC defect detection based on machine vision. Master's Thesis, University of Electronic Science and Technology of China, China, 2019(in Chinese).
洪专婷. 基于机器视觉的FPC缺陷检测的方法研究及其系统实现. 硕士学位论文, 电子科技大学, 2019.
44 Yuan M, Ghannam R, Karadimas P, et al. In:2018 IEEE Asia Pacific conference on postgraduate research in microelectronics and electronics. Chengdu, China, 2018, pp. 68.
45 Betancourt D, Nair R, Haase K, et al. In:2015 9th European Confe-rence on Antennas and Propagation. Lisbon, Portugal, 2015, pp. 1.
46 Klannik M, Rijavec B, Pivar M, et al. Tekstilec, 2018, 61(3), 162.
47 Wang Zhenguo. Low temperature and high conductivity nano-silver conductive ink and its application in flexographic RFID antenna. Master's Thesis, Beijing Institute of Graphic Design, China, 2018(in Chinese).
王振国. 低温高导纳米银导电油墨及其在柔印RFID天线中的应用. 硕士学位论文, 北京印刷学院, 2018.
48 Fu Zhenbang. Preparation of micron silver-coated copper particles and their application in RFID tags. Master's Thesis, Harbin Institute of Technology, China, 2021(in Chinese).
傅振邦. 微米银包铜颗粒的制备及其RFID标签应用. 硕士学位论文, 哈尔滨工业大学, 2021.
49 Wen Jiayue. Preparation and properties of conjugated polymer nanoparticles doped silver/resin conductive composites. Master's Thesis, Harbin Institute of Technology, China, 2020(in Chinese).
文嘉玥. 共轭高分子纳米颗粒掺杂银/树脂导电复合材料制备及性能. 硕士学位论文, 哈尔滨工业大学, 2020.
50 Merilampi S, Björninen T, Ukkonen L, et al. Sensor Review, 2011, 31(1), 32.
51 Yan Tengfei. Research on chipless RFID temperature sensor. Master's Thesis, Dalian Jiaotong University, China, 2018(in Chinese).
闫腾飞. 无芯片RFID温度传感器研究. 硕士学位论文, 大连交通大学, 2018.
52 Liu Zhiqiang. Research on the preparation process of flexible anti-gold brush RFID crack sensor tag based on screen printing technology. Master's Thesis, Xiangtan University, China, 2021(in Chinese).
刘志强. 基于丝网印刷技术的柔性抗金刷RFID裂纹传感标签制备工艺研究. 硕士学位论文, 湘潭大学. 2021.
53 Sun Liangquan, An Bing, Li Jian, et al. Electronic Technology, 2013, 34(1), 6(in Chinese).
孙亮权, 安兵, 李健, 等. 电子工艺技术, 2013, 34(1), 6.
54 Lei Pudong. Research on the printability of particle-free inkjet conductive ink based on RFID antenna. Master's Thesis, Tianjin University of Science and Technology, China, 2016(in Chinese).
雷普东. 基于RFID天线无颗粒喷墨导电墨水印刷适性研究. 硕士学位论文, 天津科技大学, 2016.
55 Rizwan M, Kutty A A, Kgwadi M, et al. IEEE Antennas and Wireless Propagation Letters, 2017, 16, 1828.
56 Cook B S. Iet Microwaves Antennas & Propagation, 2012, 6(14), 1536.
57 Cho C, Yi X, Wang Y, et al. In:Proceedings of 11th International Conference on Structural Safety & Reliability. USA, 2013, pp. 589.
58 Wu Guangyuan. Research on the application of printing technology in RFID. Master's Thesis, Jiangnan University, China, 2013(in Chinese).
吴光远. 印刷技术在RFID中的应用研究. 硕士学位论文, 江南大学, 2013.
59 Rizwan M, Kutty A A, Kgwadi M, et al. In:2016 10th European Confe-rence on Antennas and Propagation. Davos, Switzerland, 2016, pp. 1.
60 Huang Zhiai. Research on RFID tag antenna design based on inkjet prin-ting technology. Master's Thesis, Dalian University of Technology, China, 2015(in Chinese).
黄志爱. 基于喷墨打印工艺的RFID标签天线设计研究. 硕士学位论文, 大连理工大学, 2015.
61 Li W T, Hei Y Q, Grubb P M, et al. Packaging and Manufacturing Technology Transactions, 2018, 8(2), 1695.
62 Chen Yingxue. Antenna embroidery preparation technology and packaging evaluation of UHF RFID dipole tags. Master's Thesis, Donghua University, China, 2020(in Chinese).
陈颍雪. UHF RFID偶极子标签的天线刺绣制备技术及封装评价. 硕士学位论文, 东华大学, 2020.
63 Pang C H, Hung K Y, Sham M L. In: 54TH Electronic Components and Technology Conference. Las Vegas: IEEE, 2004, pp. 1461.
64 Peng Fei. Flip-package bonding process and machine washability evaluation of fabric-based UHF RFID tags. Master's Thesis, Donghua University, China, 2020(in Chinese).
彭飞. 织物基UHF RFID标签的倒封装键合工艺及耐机洗性评价. 硕士学位论文, 东华大学, 2020.
65 Qi Yi, Chen Weimin, Liu Xianming. Electronic Technology, 2016, 37(1), 4(in Chinese).
齐翊, 陈伟民, 刘显明. 电子工艺技术, 2016, 37(1), 4.
66 Zhong Z W. Microelectronics Reliability, 2011, 51(1), 4.
67 Zhang Jiabo. UHF RFID tag antenna design and packaging technology research. Master's Thesis, Huazhong University of Science and Technology, China, 2012(in Chinese).
张加波. 超高频RFID标签天线设计与封装技术研究. 硕士学位论文, 华中科技大学, 2012. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
